Explore topic-wise InterviewSolutions in .

This section includes InterviewSolutions, each offering curated multiple-choice questions to sharpen your knowledge and support exam preparation. Choose a topic below to get started.

5601.

Solve : insufficient power supply draining cmos battery??

Answer»

I just got a new video card (ati radeon 9600xt) and it recommends having a 300 watt power SUPPLY. I have a 250 watt power supply. After I installed the new card I started getting the error message "Alert: system BATTERY VOLTAGE low". I talked to the Dell customer support people and they're saying my cmos battery needs to be replaced. Is the new video card draining energy from the battery? Is the alert reffering to the cmos battery? Or are the Dell support people on crack?

Any feedback would be appreciated

Thanks, B FunkAnother question: if the cmos battery dies, am I up doo doo creek without a PADDLE? What kind of problems will the cmos battery CAUSE if it dies?

Thanks, B Funk

5602.

Solve : torrents, bad the good and ugly.?

Answer»

I heard that torrents are okay for the most part. The thing is that I know you can get BACK hacked cause you open a port. So are they real bad or ANYTHING, from what I hear.Quote from: squall_01 on May 16, 2009, 05:10:08 PM

I heard that torrents are okay for the most part. The thing is that I know you can get back hacked cause you open a port. So are they real bad or anything, from what I hear.
The good that I've heard is that as long as the original file is clean, then if you have uTorrent, you won't be infected by seeders.All torrents are bad. Quote from: Geek-9pm on May 16, 2009, 07:17:56 PM
All torrents are bad.
That's just being biased. Why do you think ALL torrents are bad?If the torrents clean your fine. Make shure to read the torrent comments because they will TELL you if there is a virus and what not. If theres no comments try to look elsewhereI have never found a torrent I liked.
Yes, I have used them. Later came to dislike it altogether. J
Just too much risk.To answer the QUESTION about opening ports, you can choose whether or not to open a port. And even if you do open a port, the chance of someone hacking you is VERY unlikely, near impossible.....unless you download a trojan that allows an attacker to gain access of your computer....A good read on p2p DANGERS.

P2P file sharing: Anticipate the risks before you download your first file

File Sharing, otherwise known as Peer To Peer. (P2P). so its not a toldy bad thing. I dont know were most of mine came from an I tried not to do torrents if I dint have to.Didn't have to what?
5603.

Solve : HP 832C printing sequence?

Answer»

Our HP 832C PRINTED pages in "first page first" order with OS ME. When installed on a new Gateway with OS XP it PRINTS last page first. It will print first page first if preferences are set to "print last page first" In other words, it prints opposite to the SEQUENCE selected.

Have removed the printer and drivers and reinstalled in accordance with HP's on line instructions with no change. Did not SUBSTITUTE a new USB cable.

What did I miss?


5604.

Solve : March monthly poll?

Answer»

4GB RAM @ 800MHz and 1GB DDR3 graphics card.448 MB
its all i needed when i GOT my computer, but now....

5605.

Solve : ATI capture cards?

Answer»

I have just installed the ATI tv wonder pro and I am having problems with the software. recordings off of a coaxial input when playde back have sound but a very fuzzy picture. it shows shapes but has no deffinition. some people request a DIFFERENT DRIVER but i dont KNOW which ONE to use. I would apprecieate any INFO and help i can get.

5606.

Solve : COMPUTER LOCKUP?

Answer»

OK heres one that has me stumped.

I upgraded my computer to a new P4 3.0 gig cpu,, 800 FSB Biostar MoBo, 512 RAM, New 450 watt power supply. I just this week put in a new 120 gig HD, New Radeon Video card. New Sound card. Everything brand new.

Now heres where it just gets me everytime,,, i am BURNING a dvd ,,in windows explorer,, or simply doing anything,, The whole system locks up. the two lights on the front of the computer are lit,, one is the reset and one is power. I have wiped this system clean 3 different times now ( XP home edition )and every single time ,, the system locks up on me,, I have no idea what it could be,, its like buying a new car and the engine wont start.

I have configured different types of hardware devices ,, new sound, video,, etc,, and it still does this,, I dont know what in the world could be taking control of the system and totally locking it up,, Does anyone have any ideas? The only thing thats left ,, is something in the case,, or perhaps the nic card,, theres also a firewire card in there.

Its kinda like fishing,, it doesnt happen everytime,, ya gotta be patient and it will COME,,Other then buying another version of windows or switching out the case for another one,, im not sure what else i can do. i have taken it to a tech to mess with and he just rewiped it and that was it,, any input is appreciated

RichHave you tried a different stick of ram?At what point in your upgrade process did it start happening? You could try re-seating the video/sound cards and like Metal says.. pop a stick of ram (assuming you have 2 256 sticks) then try the other. There is an issue XP has when clicking on .avi files in Explore that causes total hang up and 100% CPU usage. You can search regedit.com for more info on a reghack to correct it.well the lockup comes when i am burning copies of my dvds,, I swapped out the single 512 ram chip with another one....and i actually added another fan to draw out the heat from the computer,, all the cards are seated properly and the thing still locks up. I dont know where else to go,,I am taking it back next Tuesday for them to look at it,, again,

hopefully worst case scenerio,, they can just give me an AMD setup and take back this one. The fastest way for me to intentionally lock up the system is to copy discs,, but it will lock up, just by surfing the web or windows explorer,,, so it certainly has me stumped,, ive NEVER seen anything like this before,,

5607.

Solve : Help! sys.reg problem & Adware Gator??

Answer»

Hello, every time i BOOT up my computer i get the following message : cannot import sys.reg Error opening the file. there MAY be a disk or file system error. What can I do to fix this?


Also, I BOUGHT new virus scan and found quite a few. Whenever i run the virus scan it KEEPS telling me that I have a program called Adware Gator. It wont let me remove it so I quarrantine every time. Is this harmful?
Thanks in advance for your help!
David not sure about your sys reg thing, but gator is SPYWARE, get 'adaware' or 'spybot' to remove it.

5608.

Solve : Windows XP 64-bit won't recognize SATA HD?

Answer»

I just built a new system from the ground up and I bought a seagate 160 GB 7200 rpm serial ATA hard drive. I went to install Windows XP 64-bit edition (because I am running a 64-bit platform) and of COURSE the windows setup did not detect my hard drive by its'self...so i pressed F6 to install the drivers and I used the drivers that came with the CD, however it doesn't work with those drivers it WOULD give me an error message saying a file was corrupt. So I tried the drivers from my motherboard manufacturer, those didn't work either...Long story short I've tried just about every driver i could find and NONE of them work. So I thought it might be the OS (considering that windows xp 64-bit is still beta) so i tried a copy of windows 2000...and it would recognize the drivers however it would not install them...I am now at a loss as of what to do next...should i get a standard IDE hard drive...should I return this drive...If anyone could help me with this issue I'd greatly APPRECIATE it. Thank you so much for your time. -Nickive said it somewhere else...
Jumpers. lol
They make and break a computer (so to say)

Check the jumpers, that could possible be the problem...

But first, does the computer even recognize the HD under your BIOS?

If not, check connections and jumpers.

Bien Suerte![good luck]
(I had too much spanish at school today!)
EdYes it recognizes my hard drive in bios, however I don't think serial ATA drives have jumpers...oh sry, i read too fast, lol
No jumpers on serial!
HEH...
OOps.....

Umm..
*casually slips out of sight*

5609.

Solve : Free Telephone number lookup website?

Answer»

Has anyone out there found a totally free TELEPHONE number look-up site? No matter what site I go to that says you can look up a phone number FREE, they redirect you to Intellius or some other site that wants you to join for $$$$$ or charge you $1.95 for the phone number. Most of the phone companies no longer publish White or Yellow pages so we are a captive audience. Thank youQuote from: 02bin3 on December 29, 2012, 05:12:14 PM

Most of the phone companies no longer publish White or Yellow pages ...
Huh? They still distribute the paper phone books in all communities here in Ohio, as FAR as I know. Surely, if the phone companies stop printing phone books, they'll make online directories available. Agree with Soybean...
I can GIVE you some of mine...we probably have 15 or so...I live in the North East where Verizon used to own the landlines, however, after selling them to FairPoint, we no longer received phone books except for 1 that is privately published and is hit-or-miss with phone numbers. FairPoint does not issue phone books, and I have looked all over Google for websites that might be affiliated with a telecommunications carrier, and there just doesn't seem to be any. Every single one wants to charge you for the phone number. We all learned to go to the phone book to look up a number instead of calling 411, and then the phone companies started charging 50 cents every time someone called Information for a phone number. It just doesn't seem quite fair that the phone companies have left many of us out to dry by not providing FREE phone numbers on the Internet. After all, their expensive to publish phone books are no charge. Up until recently I could get phone numbers on the internet, however, it seems they've all gone over to charging for phone number look-up now. Thank you all for your input.For looking up numbers, I used to use DexKnows, just click on "Find a Person" for Whitepages.
Recently, I switched to http://www.whitepages.com/ even though they are the exact same service as DexKnows because for some REASON DexKnows temporarily discontinued reverse-phone lookups (which is back up again).

When you see ads from WhitePages/DexKnows to see a phone number, it means that the number listed. Likewise, the same occurs when you do a reverse phone-lookup. Charges to see the information are especially prevalent when it comes to reverse lookup on cellular phone numbers.

For businesses directory, you could use Microsoft's free voice-activated service. Oddly, it does not have a website dedicated to itself that I could find, but you can read about it here:
http://en.wikipedia.org/wiki/Tellme_Networks
Or just dial it at (888) 247-2425.
It works quite well and will connect you for free, especially useful on payphones that don't lock up the microphone in the receiver... Don't know how widespread this service is available but here in Canada (i believe it also is available in the U.S.) this site offers what you seek.
http://411.ca/
truenorthThanks for your suggestion, TrueNorth. 411.com was my last bastion for free phone numbers, however, they too have recently redirected phone number searches to PeopleFinders who want $1.95 to provide the phone number. These Directory Assistance websites advertise themselves on Google as being "free", however, they are not. At least here in the USA they aren't free. Just a random thought...your browser searches may be being re-directed to all pay SITES...Hello Patio,
I tried using IE instead of Firefox and it directed me to PeopleFinder, too. No matter what Directory Assistance website I go to, they end up redirecting you to another site that wants money for giving you the phone number.
Thank you02bin3,I believe patio is on to something in his last post.I just used 411.com to look up a friend of mine in Auburn GA using first and last names and city and state. I got an immediate correct address and phone number. I don't know if some embedded program can take over all browsers and redirect the search. Just as an experiment download/install/use browser Opera to see what happens. If it also turns out to be the same then i think you have a malware issue to deal with.truenorthIt's not just him experiencing this. Whenever I reverse look up a cell phone or normally unlisted number, it's always redirected (either immediately or when a 'show more info' button is clicked) to another site with membership required. Known listed landline phone numbers don't do this when reverse looked-up, and a normal lookup by name and location does give the phone# in most cases. It's been this way since I first did some directory searches several years ago.

02bin3: Are you doing a reverse lookup or a normal lookup by name and location? Have you tried looking up known names/numbers?TechnoGeek: "02bin3: Are you doing a reverse lookup or a normal lookup by name and location? Have you tried looking up known names/numbers?"

Funny you should ask. I wasn't doing a reverse lookup, just by name & town. I did do as TrueNorth suggested and downloaded Opera and tried that. Got the same results, however, I started looking up names, including my own, of people that I knew that did not have unlisted numbers and some lookups did provide the phone number and some of them were redirected despite the fact that I knew they had a number that was not unlisted??? Then I did they same thing using IE and Firefox and sometimes I got the numbers and sometimes I was redirected. My own number is in the local phone book that covers many, many towns, in two states and is about 1/4" thick (sparsely populated here), however when I looked it up on 411.com, and other online directories, I was redirected to a pay-for-number site. Doesn't seem to be rhyme-nor-reason as to why one number comes up and another one doesn't. Ah well, thank you all for your interest and input.zabasearch.com is free and gives more than a phone number, address, etc. It is terribly frustrating to be asked to pay for phone numbers. If you forget the name of this website, just search "find people" and it will come up, at least it will in Google Chrome.
5610.

Solve : Get attention??

Answer»

Hi everyone xD
I've just (nearly) finished programming an online market simulator game (access it at www.vcp.co.nz). I think it's pretty good, I've been working on it since may, and it's won a couple of awards now (local science fair/New ZEALAND national technology fair) and been nominated for a couple of others. I'm just looking at getting people to use it and then tell me their thoughts - i have about 50 users now, controlling 100 companies. There is no real FAQ yet but its very straightforward to play, uses basic economics principles in managing a company and playing a stock market.
If you want to register, its completely free as well as being ad-free and low on the bandwidth. I made the entire thing in programmers notepad in php, and one of my friends did all the pictures in PHOTOSHOP. It's just a MUD, but it'd be awesome to get peoples opinions.

And also, criticism is more than welcome - if you think it could be improved, TELL ME.
CheersJust tried it out, good work, seems pretty similar to those old HTML/server-based games that seemed to be popular a while ago (no idea if they are now)

Only problems I could see are mostly cosmetic; STATISTICS page has a white bg (probably should be black), a few places where HTML entities show up (the side bar says   -> when you expand it, but again I imagine this is all being tweaked.

You might want to make the terms and conditions more serious... although, come to think of it, my blog privacy policy makes me a hypocrite by saying that.

Yeah thats a firefox problem, the   - none of the other browsers (chrome, opera, ie, safari) have it as so far as I know (i test with chrome, opera, and IE, beta testers report safari/firefox stuff). I haven't fixed that just yet. I left the statistics backcolor white and the news backcolor grey to differentiate between those and the actual gameplay.

Thanks for the FEEDBACK though

5611.

Solve : frozen mouse/cursor?

Answer»

My CURSOR is totally frozen. No matter what I do, it won't move. However, the computer works totally fine if I use the keyboard (but it's such a pain!). I bought a new mouse and installed it but STILL it won't work. I've read that the proble might have something to do with the video card DRIVER, but I don't EVEN know what that is!!!!
HEEEEEELLLLPPP!!!!!!!

5612.

Solve : defragtakeshoursTHANKYOUTHANKYOU?

Answer»

I'm sorry to put this as a new post but THANK THANK THANK YOU for your help on the defrag. I keep trying to post or reply and get an error but I want to THANK everyone for their help.
The defrag was going on every DAY for months for hours. I deleted several things using Control-ALT-Del that I have no IDEA what they are: Hpsivxd Ccappp asiserve osa reminder loadqm stimon find fast and a few that I did know like printer in sleep MODE and n protect and the defrag was FINISHED in a very LITTLE time and didn't start again this AM

5613.

Solve : Xp Pro Programs Menu?

Answer»

Running WinXP Pro. When I install a program it does not SHOW up on programs menu. Under "documents and SETTINGS" in directory I have a folder called "all users" and one called "Office" which is the name logged on to, and is the only choice given at logon. The installed programs seem to be going to the "office" folder but my start/run/programs is showing the "all users" programs. Also the programs only show 3 ROWS and end with the programs STARTING in "m". Both program folders show considerable more programs than APPEAR on the Start/Programs menu.
Bruce

5614.

Solve : Low Speaker Volume?

Answer»

No matter how high I set the volume levels, I get low output from the speakers. I'm using a SoundBlaster PCI 128 sound card.

I'm pretty SURE my sister SCREWED it up SOMEHOW, since she's been known to put several trojans and malware on my computer... i.e. "COOLWEBSTUFF!!" folders, etc etc

Anyway, I've tried MAKING sure EVERYTHING is connected properly, and it is. I've tried plugging headphones into the back... no output at all. I've tried running the headphones through my crappy old joystick, because it worked before... but this time, no dice.

Anyone know what the problem is, or how to fix this? I'm tired of the CPU fan being louder than my speakers.

Thanks.

5615.

Solve : CD rom boot recognize program?

Answer»

I WOULD like someone who knows DOS and Config.sys files to write me a BASIC RECOGNIZE CD at start-up. You can even COPY it from your computer. At dos prompt type in "Type config.sys" or whatever your computer has on it that allows dos to read the drive.

X
Dan

5616.

Solve : Moto e 2020 android?

Answer»

When I take a video on the native ANDROID camera( only video) I get these 2 or 3 lines at BOTTOM of video. Check picture. I updated app restarted PHONE and nothing WORKS. If I download another camera app I don't have this ISSUE. Please help

5617.

Solve : The Lunacy of TSRs?

Answer»

I get taken in by TSRs alot. I look for FREE screensavers and wind up with these whirly-gigs that sit on my desktop and really worm up my computer. I know not to run these things, HOWEVER I keep thinking that some where....ah yes, that place...there is a really K***A**
screensaver place. My question: is it overly dangerous to toy with these weird PROGRAMS at the "free"sites?? :-/ With a reasonable level of updated protection you should be OK.Spy-Bot acts funny...it removes all the gunk, but says that I must restart for it to remove acouple of programs that are in memory, and when I restart, it does the same thing again?? :-/When spybot asks to run at startup, it attempts to do SCAN BEFORE any nastys get loaded into memory. Allow it to complete the scan. You should ALSO run ad-aware. Each program has its own strengths and one will often find and eliminate something that the other doesn't.

5618.

Solve : How to create natural sounding audiobooks with no limits?

Answer»

I have roughly 80 PDF documents that range from 2 pages to 20 pages each. I am trying to find a WAY to convert them each to an audiobook to help me read and study the documents, including listening to while out. I believe I am able to convert them to text if that makes things easier. I am trying to find an app or program or some solution where the voice is more human than robotic and where there is no word/character limit. I have come across some apps that have pretty good natural voices that can read the text but the ones I have seen have LIMITS on how many words/characters. I am looking to play this audio through my iPhone and ALSO on my PC (Lenovo). Please let me KNOW if you need ANYTHING clarified regarding what I am looking for. I appreciate any help! Thank you.

5619.

Solve : i just noticed?

Answer»

you know what I just NOTICED, is that GX1_man has over 42% of the posts on this forum in his name. and its GROWING quiet fast..


congratsMaths letting you down?

Quote

Our users have made 143512 Posts within 24781 Topics.
( 10,576 (and counting) / 143,512 ) * 100 = 7.4%



I would personally have said THOUGH that it's growing noisy fast.

dad gum im all off today.. but its a monday Hee hee! You should SEE ME on a bad day!

7.4% is still a fairly hefty proportion though. lol yea it is Funny, I thought it was: 13.571671709531013615733736762481
(I am not a math wiz, at all)
(In fact, I am downloading AOL files that were STUPIDLY released not that long ago...)Quote
Funny, I thought it was: 13.571671709531013615733736762481
(I am not a math wiz, at all)
Clearly!!! Quote
Hee hee! You should see ME on a bad day!

Windows ME has good days?
5620.

Solve : Animation film cars - font?

Answer»

Hi there, i'm back from beeing away Hopely I didn't miss a lot on the FORUM. As my first post after I left I wonder if someone knows where you can download the font that they use in the animation film of pixar: cars. You can see the font on this picture: http://www.latinoreview.com/films_2006/disney/cars/images/teaserposter.jpg (watch how cars is written, I LOOK for that font)

Greetz

& @dilbert, congratulations with your BIRTHDAY, I thought it was a bit late to post it in your TOPIC, but I haven't forgot you Quote

Hi there, i'm back from beeing away Hopely I didn't miss a lot on the forum. As my first post after I left I wonder if someone knows where you can download the font that they use in the animation film of pixar: cars. You can see the font on this picture: http://www.latinoreview.com/films_2006/disney/cars/images/teaserposter.jpg (watch how cars is written, I look for that font)

Greetz

& @dilbert, congratulations with your birthday, I thought it was a bit late to post it in your topic, but I haven't forgot you
I'd say it was made with your basic cursive font, but it might have been squed.
Make the text you want in Photoshop, shrink it, STRETCH it, and then emboss it with a silver background...
5621.

Solve : Video Compression?

Answer»

I've created a video using my WEBCAM, which was saved as an AVI file. I then edited it in Windows Movie Maker and that saved it as a WMV. The file is about 60mb now and I was wondering whether there was something I could do to make it smaller without zipping it or whatever. I want to upload it to a website and EMBED it into a webpage.

Any ideas on how to reduce the size without reducing the quality?Reducing the size ALWAYS decreases the quality with audio, video, etc.Quote

Reducing the size ALWAYS decreases the quality with audio, video, etc.
Well, hmm...
What about changing the file extension?
Some times, there are different video and audio extensions that do turn out different file sizes, with the same quality results.

And what about Codex?
You might be able to find a codex conversion program.
There are special video compression softwares and companies that you could pay good money to avoid loss, but its too much to pay for the average user.Quote
What about changing the file extension?
You DO know that changing the name/extension of a file does nothing to its contents? Don't you?

Quote
Some times, there are different video and audio extensions that do turn out different file sizes, with the same quality results.
MPG enocding can be lossy but can also produce results that are virtually indistinguishable from the original.

Have a look in the software FAQ (see my signature) for Vidomi.Quote
Quote
What about changing the file extension?
You DO know that changing the name/extension of a file does nothing to its contents? Don't you?


What I meant, and I realize I didn't communicate this one well, was to convert it to a different file type (that's what I meant by file extension)

Hows that novel of yours comming along?Quote
Hows that novel of yours comming along?
You've knocked me over there. I'm flattered that someone paid attention to my rambling!

Doing well thank you; I've got a tedious formatting job to do, about 10% done now, but making good progress. So FAR, on target for completion at the END of the month.

Thanks very much for asking. I'll buy a COPY, sight unseen.

Is the title "The Disembodied Head"?Great. It'll be $500. Deal?

It's entitled "Insensate" and it's a fantasy thriller. Feel free to back away in horror.Quote
Great. It'll be $500. Deal?

It's entitled "Insensate" and it's a fantasy thriller. Feel free to back away in horror.
Are you going to get it published, or are you still planning to stick to Amazon*?
(Wondering if I will see it in my public library soon)
* See, I do pay attention. I even remembered the Amazon rambling
(the typos you would see if I didn't have Google Spellcheck at 1:50AM)

BTW: I just noticed your rank is "Egg Head" and now I wonder how well that applys to you... and why I've only seen that rank for your username...Rob is in a league by himself.
5622.

Solve : Computer problems don't compare to this!?

Answer»

OK, so we spend a good portion of our day helping people with computer problems, of varying complexity and severity. Next TIME you think a problem posted here is serious, remember the poor sod working at Tech Support who got this call!*

SuperMac records a certain number of technical support calls at random, to keep tabs on customer satisfaction. By wild "luck," they managed to catch the following conversation on tape.

Some poor SuperMac TechSport got a call from some middle level official...from the legitimate government of Trinidad. The fellow spoke very good English and fairly calmly described the problem.

It seemed there was a coup attempt in progress at that MOMENT. However, the national armoury for that city was kept in the same building as the Legislature, and it seems that there was a combination lock on the door to the armoury. Of the people in the capitol city that day, only the Chief of the Capitol Guard and the Chief Armourer knew the combination to the lock, and they had already been killed.

So, this officer of the government of Trinidad continued, the problem is this. The combination to the lock is stored in a file on the Macintosh, but the file has been encrypted with the SuperMac product called Sentinel. Was there any chance, he asked, that there was a "back door" to the application, so they could get the combination, open the armoury door, and defend the Capitol Building and the legitimately elected government of Trinidad against the insurgents?

All the while he is asking this in a very calm voice, there is the sound of gunfire in the background. The Technical Support GUY put the person on hold. A phone call to the phone company verified that the origin of the call was in fact Trinidad. Meanwhile, there was this mad scramble to see if anybody knew of any "back doors" in the Sentinel program.

As it turned out, Sentinel USES DES to encrypt the files, and there was no known back door. The Tech Support fellow told the customer that aside from trying to guess the password, there was no way through Sentinel, and that they'd be better off trying to physically destroy the lock.

The official was very polite, thanked him for the effort, and hung up. That night, the legitimate government of Trinidad fell. One of the BBC reporters mentioned that the casualties seemed heaviest in the capitol, where for some reason, there seemed to be little return fire from the government forces.

Ok, so they shouldn't have kept the combination in so precarious a fashion. But it does place "I can't see my Microsoft Mail server" complaints in a different sort of perspective, does it not?

*Actually, this isn't real. But STILL, it's moral is correct. I saw an advertisement poster for some kind of travel laptop, with a picture of a snake, asking, "You're stuck xxx miles in the jungle, and just bitten by a snake. How do you find out the antidote?"

Google search for, snake antidote. Unable to connect to proxy sever. Please contact your network administrator.

Running network setup wizard. Connection established. Would you like a free car?


Reminds me of this http://www.ctrlaltdel-online.com/comic.php?d=20021104

5623.

Solve : Re: How do you make a gif ???

Answer»

Even simpler is looking in the software FAQ, under "graphics".

See the link in my sig.Quote

Quote
How did u never taught about google?

What AWH thank you i did not think it was that simple......

Proph you've been around long enough to know better...

First of all, I found the first three posts FULL of IM talk...
Second of all, make a present, and WRAP it up, and cut SHORT English Language and you have a Gif

I use Macromedia Flash to make Animated GIFSHeres a cheap example
5624.

Solve : Xbox joypad help?

Answer»

(not sure if this is the right place for this)

one's a standard pad. The wire CAME loose on the inside of the joypad. I took out the six screws to try fix it but the pad still wouldnt open up. How can I get around this? It's such a simple TASK I don't fancy buying a new one.

my other joypad is an intec turbo pad with programmable buttons. That means you push the 'program' button then tap a few keys. The pad then remembers the pattern and places it into one button. Like installing Ryu's Ha Do Ken into the X button. The problem is, I don't know how to reset it so it behaves normal. I lost the instructions ages ago and can't find it on the net. So any HELP is gratefully appreciated.No Idea about the first pad, but with the macro programmable pad could you not just PRESS the programme button, then the X button, then the programme button again (if that's how you stop it that is).There are actually more than 6 screws. The others are underneith the stickers on the back.

5625.

Solve : can't send email on one computer???

Answer»

I cannot send emails longer than one or two words on one of my laptops - the other laptop has no problems -- I can't send emails through webmail or out of Outlook EXPRESS - something is blocking them. I removed every friggin' firewall and ANTIVIRUS program I can find on the computer (its my wife's) and STILL cannot send -- is there some connection setup I need to change or something else going on???What happened PRIOR to this? How long has this been happening? What protection is in place? Do you have a real Windows CD to reload if that is necessary to solve it? What version of Windows? What service pack? Are all MS updates installed?

More info needed.

5626.

Solve : dial up problem?

Answer»

did you type TYPE in there?

EVERYTHING in the bold on that line.add to reply #13 HELP device=himen.sys/testmemoff
COMMON
files=10
dos=10
buffers=10
dos=high,umb
stacks=9,256
devicehigh=ramdrive.sys/e2048
last drive=z
Sorry about the delay computer#2 crashedhimem.sys is spelled WRONG in your config.sys or you just TYPED it wrong in your post...

PATIO. 8-)Correct,I MISSPELLED the word.should be himem ChuckI guess the problem was too tedious to continue,but thanks for getting me as far as you all did.Good night,and good bye... Chuck

5627.

Solve : Really really annoyed?

Answer»

So I spent half an hour writing a post that exceeded the post SIZE limit so I needed to send it in 2 posts, only to find by the time I have finished that the topic has been locked because people can't control themselves and someone can't handle critisism of their country. I missed my lecture because of this. As you can imagine I am extremely **** off. I know this is a computer help forum, but I thought it was a place to make friends as well, and discuss things about the world like adults. Guess not.This is the kind of thing I was talking about...Nah, why would anyone want to make friends here?! We're all weirdos!!!So who was it that can't handle critisism of their country?

I have never seen a bad post from you Neil.

What post was locked?The pledge of allegiance discussion. A post from Proph was deleted from this thread it seems, so I don't make sense earlier.If it was deleted, then there probably was something wrong with it. I didn't see it, so can't advise further.Well Neil, you contribute greatly to this site.

If a post is removed, or altered............

I surely know you were not at fault.

I still have not found a response by you
that was not meaningful and a good
contribution.

I on the other hand should be hanged
at highnoon. :-?

RobertMost of the youth on this forum don't/or can't VOTE anyway.

All they have is an opinion at least in the USA.

You gotta be 18 ,and heres the big sticker "Politically
Motivated" Y'all.

This is a required------------------>SNAP!.......EXCUSE me! WOW!I understood Neil's consternation from the beginning...So did I. Quote

I understood Neil's consternation from the beginning...


I'll be HONEST, not entirely sure what this means

As to what Flame said, most people who come here for help aren't going to spend time reading other people's posts. And provided the forum has a ballance of opinion, where's the harm.I'm confused but that's not unusual. :-?Quote from patio on Today at 12:04pm:
I understood Neil's consternation from the beginning...



I'll be honest, not entirely sure what this means Roll Eyes

Quote
So I spent half an hour writing a post that exceeded the post size limit so I needed to send it in 2 posts, only to find by the time I have finished that the topic has been locked because people can't control themselves and someone can't handle critisism of their country. I missed my lecture because of this. As you can imagine I am extremely **** off. I know this is a computer help forum, but I thought it was a place to make friends as well, and discuss things about the world like adults. Guess not.

Should be self - explanatory.Quote
Nah, why would anyone want to make friends here?! We're all weirdos!!!

lol [smiley=2vrolijk_08.gif]
5628.

Solve : "windows xp error message"?

Answer»

Hi everybody

i would be GREATLY thankful to all of who would help me with this problem.
every time i install a GAME that requires to be registered in window's registry,i get the error
"registry editing DISABLED by administrator" :-? i cant figure out why.because i am logged in as administrator and i cant access "regedit or gpedit" .I tried system repair but it didnt work.
Any help would be greatly appreciated .

Look in USER accounts on the control panel. Just to make SURE Quote

Look in user accounts on the control panel. Just to make sure

i've checked and i'm logged in as administrator :-?
5629.

Solve : .ST1 .ST2 Expanding?

Answer»

Hello Dears,
I am Walid Antar, a NEW member to this forum, asking forhelp to extract 84 files of extentions (may be .STY or .sth) from two files of extentions .st1 and .st2 . The two file contains styles (rythems) for a keyboard.
I found that .st1 and .st2 = SPICE : Status
but also there are extensions ( .$01 and .$02 ) which are DOS Pipe files and also for midi file. Knowing that styles are midi files and these files (.st1 and .st2)
must be put in floppy disk then attaching them to the keyboard via its floppy drive while operating and pressing a spesific key at the same time.

SORRY for talking too much, but is there any HELP for expanding these files on my pc??
Best Regards,
Walid Antar
Welcome to the forums.

Do you know which company or program created the files and what media are they currently recorded on :-?The company made them is Roland for arranger keyboards EXR-3/3s/5/5s/7/7s
The files are on http://www.rolandus.com/support/downloads_updates/eula.aspx?DownloadId=438
then click agree
but sorry I don't know that program that recorded it
By the way Sir. what is meant by Spice : Status ?
and by DOS pipe file??
I like to know these things :0)
thanks for your replay
:0)I have downloaded the file from the site you posted, unzipped it and created floppy disks and now cannot understand your query about expanding the .st files which do not seem to need expanding from their present form.

Instructions on how to load the .st file contents into the Roland instrument are contained in the .pdf file which is included with the unzipped files.

Your queries about Spice : Status and DOS pipe file come from considering only file extensions. Spice is a name which can be applied to an analog circuit simulator, a telecom company in India, a thin browser and many other things. A Dos pipe file is generally a temporary file created when using the DOS Pipe feature. I think you can safely ignore these when considering the Roland instrument .st files.

If you have created the files on floppy disks from the disk images you should now proceed to load the content into the Roland instrument following the instructions in the .pdf file.

Good luck

5630.

Solve : processors?!!?!?

Answer»

Basically I'm pretty useless with computers. Can anyone tell me which processor is better? A Viiv PENTIUM D915 Processor Dual Core (2.80Ghz, 800Mhz, FSB 2x2Mb cache) or a Viiv Core 2 Duo Processor E6300 (1.86Ghz, 1066Mhz, 2Mb Cache)? I have been informed it is the latter, but I just want to make sure I make the right choice. Thanks.

ToddMore details about the rest of the system and what you are trying to do (gaming?) would be important info to add. Quote

Basically I'm pretty useless with computers. Can anyone tell me which processor is better? A Viiv Pentium D915 Processor Dual Core (2.80Ghz, 800Mhz, FSB 2x2Mb cache) or a Viiv Core 2 Duo Processor E6300 (1.86Ghz, 1066Mhz, 2Mb Cache)? I have been informed it is the latter, but I just want to make sure I make the right choice. Thanks.

Todd


Yes, it is the latter.

The Core 2 Duo family is the succesor to the Pentium D family. They give u more performance each clock cycle. That is why the E6300 @ 1.86Ghz would be better than a Pentium D 920 @ 2.8Ghz, even though it seems pretty crazy.
You can also tell this, by the price. The E6300 costs 180$, while the Pentium D 920 costs 115$.

Not ONLY that, but the E6300 can overclock up to 3.0Ghz, making it the same as the X6800, the most powerfull CPU on earth by far. That is why the E6300 is not only the fastest CPU out of the BOX, but it has the most potential of all the CPU's currently released.

It is the best price/performance effective CPU that has ever been released, giving u 1000$ worth of performance (price of the X6800) for only 150-180$. The only thing that the E6300 (Allendale) CPU dose not have better is cache. It has only 2MB for 2 cores, while the more expensive Core 2 Duos (the ones called Conroe, wich are the E6600 and up) have 4MB of cache. This dosent improve performance all that much, but is important to some enthusiests. Even the Pentium D 920 has 4MB, but in no way does that make it better.

*Note that u should also buy a great cooler for the E6300 to make the overclock much and easier, perform better, reduce temperatures and thus prolong it's life. I reccomend the Zalman CNPS9700 heatpipe cooler.

The Core 2 Duo CPUs are the finest ever created and i hope to also have one of them soon. Enjoy!

Chris Thanks for your time, and your detailed explanation has put my mind at rest. I am purchasing my computer from Del, so would it still be feasible to to install the cooler you are talking of?

Thanks again.http://en.wikipedia.org/wiki/Water_coolingQuote
Track... sorry to kinda go of track but.. and also pardon the pun... i brought a new pc and have a water cooling system... my friend was telling me they are usless and also break easy destroying pc's with water... is this true ??


Water Cooling is not risky.Quote
Thanks for your time, and your detailed explanation has put my mind at rest. I am purchasing my computer from Del, so would it still be feasible to to install the cooler you are talking of?

Thanks again.

You should still be able to install an aftermarket cooler.

If u already know what components u want, u dont have to buy an already built PC, or u can at LEAST buy each part seperatly and have the company build it for u especially. Buying a PC already built wouldnt be more cost effective as using the online form to choose what parts u want and have them contruct it for u, on newegg.com or such.ok, so is the Viiv Core 2 Duo Processor E6300 (1.86Ghz, 1066Mhz, 2Mb Cache) better than the intel viiv pentium 945 Dual core processor (3.40Ghz, 800Mhz, 2x2Mb)?Did you read that up there?

Keep in Mind that you will not be able to overclock your Dell. You may not be interested in this anyway. (I wouldn't be.)

My first question 6 days ago has still not been answered.

Quote
More details about the rest of the system and what you are trying to do (gaming?) would be important info to add.

The "best" depends on what you want to do.I'm not sure I will be overclocking, especially as I'm not sure what it is! Haha. I will be using the computer for general mutimedia, internet and a wee BIT if gaming now and then. Nothing too testing.

Thanksoverclocking is where you boost the capability of a HARDWARE above it limits.. but its very dangerous u could burn it up if you dont keep it kool.Quote
overclocking is where you boost the capability of a hardware above it limits.. but its very dangerous u could burn it up if you dont keep it kool.
Overclocking is like eating.. if u cant see that u have gained 400 pounds, maybe u shouldnt be doing it.
Its not dangerous if u keep an eye on the temperatures.One of the reasons I don't overclock -- it's too easy to lose track. (Besides, I rarely'd need it.)One of the reasons I don't overclock is................just look at me.


SNAP! [smiley=vrolijk_26.gif]I'd rather pay a bit extra for the next model up, than mess around overclocking, let alone BUY stuff for overclocking!!!
5631.

Solve : I'm not sure...?

Answer»

...that I like being an "Egghead". :-/You dont have a Choice!! Just to once again clarify, that is a rank right?
(I'm just going to stop using Google Spellcheck so we all know what I am loke this time at night)
I mean, what todes egghead have to doo with (OH GOODNESS! I AM TIRED) computers anyways? There must be coms *some explanation to why that would come up...
I belive I am spilling *slipping into a (MIND blank) mn *power off mode now.
Well, I CANT even REMEMBER what I was saying now, and I belive its time for me to go WATCH the x files, see a carligt out site *side, and think I am about to be abducted again.
(man, those x files do some harm to your brain when your tired...)
And belive me, none of these typos are fake.

Well, Goodnight everyone

EDIT: It is now 1:30PM and I have just waken up. Goodness, I was tired wasn't I? And, I managed to watch two episodes of the X-Files.I thought you were the Eggman, Koo Koo Ca Choo. You'd know all about vegetables, wouldn't you, CARROT BOY! MUWAHAHAHAHAHAHA


Edit: just realised egg isn't a vegetable.:-?Quote

:-?

I see I have induced the desired reaction.Not from me, you get a "LOL " and a "".The comment was directed at Panboy, in order to futher complicate the riddle! He'll know To The Carrot Mobile, i have some Eggplant Juice in the Back SEAT!yuck eggplant This thread is beginning to scare me...y??? OICQuote
To The Carrot Mobile, i have some Eggplant Juice in the Back Seat!
Any egghead snacks back there?
5632.

Solve : Web Site security check?

Answer»

Is it possible to do a "SAFE" SITE survey on any AVAILABLE (previously unknown) web ADDRESS before going straight to the site?What do you mean?

Have you TRIED McAfee Site Advisor? (Just PUT a web address into the box on that page.)

5633.

Solve : Ex-Member bug?

Answer»

his site admin.. he can fix most if not all of the bugsQuote

We could benefit from having a second Admin, one that's here more often.

Besides, then we can say:

"Always two Admins there are. No more, no less"

--Yoda


Well, I think we should just ask that GX1_Man be setup as the admin them, or at least a Gmod. Gmods cannot change the entire forum, just what the admin specifies they can change.
something that way when can have a way to fight some of the bugsQuote
I paid for Windows ME and got a whole heap of trouble. I didn't pay for Ubuntu Linux and didn't get a whole heap of trouble. So I guess you don't get what you don't pay for...


Or better yet you get what you didn't pay for...

patio. 8-)Now, come on, GX1_Man. You compare anything to winME and it puts WinME in the dust. Linux is great, true, but Windows ME defies the "get what you pay for" axiom. Heck, Windows 98 is better! That's really not a fair comparison. Honestly! I haven't had ONE single problem with Windows ME!
I've had MORE problems with 98! Too many BSOD's!Oh, I got the BSOD with 98, for sure. But when I got ME I got a BSOD an average of 10 times a day, to the point where the computer wouldn't run LONG enough to do a virus scan. This had partly to do with our reliance on NORTON at the time to protect the system (HEY, we didn't know), and partly to do with ME's instability.

On Windows XP, I've gotten a BSOD maybe TWICE since I got my first copy of it way back in... can't remember... no matter. You can see why I like XP: Relative to other Microsoft OS's, it's extremely stable.Quote
Oh, I got the BSOD with 98, for sure. But when I got ME I got a BSOD an average of 10 times a day, to the point where the computer wouldn't run long enough to do a virus scan. This had partly to do with our reliance on Norton at the time to protect the system (hey, we didn't know), and partly to do with ME's instability.

On Windows XP, I've gotten a BSOD maybe twice since I got my first copy of it way back in... can't remember... no matter. You can see why I like XP: Relative to other Microsoft OS's, it's extremely stable.
I don't think I have ever gotten BSOD on Windows XP, that's because its been replaced with other error messages.

But I really am not kidding: I haven't had any Windows ME problems.
Quote
Now, come on, GX1_Man. You compare anything to winME and it puts WinME in the dust. Linux is great, true, but Windows ME defies the "get what you pay for" axiom. Heck, Windows 98 is better! That's really not a fair comparison.


Ummmm, I think you are referring to Rob, the Eggman. Oops!

EDIT: Zylstra, there is a BSOD in WinXP. when we had winMe my lil sister did something to the nav. files which would cuz the bsod at the logon screen sometimes, or right after you logged on.. sadly i wasnt too familiar with the art of reformating so we had to take it to a gateway shop in the next town and they said they fixed it but the only pushed the bsod back til 10 mins after youve logged on.. then we got a new computer.

Quote
when we had winMe my lil sister did something to the nav. files which would cuz the bsod at the logon screen sometimes, or right after you logged on.. sadly i wasnt too familiar with the art of reformating so we had to take it to a gateway shop in the next town and they said they fixed it but the only pushed the bsod back til 10 mins after youve logged on.. then we got a new computer.

The NAV files?
You mean "Norton AntiVirus"? Of course it would GIVE you BSOD. As well as BS!

Dilbert:
That BSOD message comes before Windows XP starts. It represents that there is a hardware error and that starting your computer may cause SERIOUS damage.
It also represents that my teacher has been trying to open the computers to eat the SPAM that she thought the SPAM filter caught.oh ok... well i didnt know that back thenQuote
Dilbert:
That BSOD message comes before Windows XP starts. It represents that there is a hardware error and that starting your computer may cause SERIOUS damage.
It also represents that my teacher has been trying to open the computers to eat the SPAM that she thought the SPAM filter caught.

LOL

Actually, on several occasions I got a BSOD during my Windows session. I was unable to troubleshoot after the third time because it never came back.

Why'd I wait for numero tres for me to troubleshoot? My policy on troubleshooting. If it's a hardware problem, troubleshoot immediately. If it's a software issue, wait a bit and see if it was a fluke.
5634.

Solve : Useless question re: Ad-Aware?

Answer»

So you run an Ad-Aware scan. This is good. You're system is CLEAN. Also good. But while running the scan, you notice that the data regarding the file currently being scanned (you know, next to the blue arrow) OFTEN changes in color from black to red or green. Does anyone know what this is meant to indicate? I'm wondering strictly out of curiousity. If you LOOK closely, you will see the difference. Executable files, non executable files, and registry entries. Not necessarily in that order.Ah... I assumed it MUST be something like that. Thanks for letting me waste your TIME, 2k!!a question is a question no matter how simple or how confusing...

and as long as your question gets answered then its not a waste of time.

5635.

Solve : Re: Sin Bin ???

Answer»

Proph, I'm not sure that asking for the Sin Bin to be re-opened is such a GOOD idea Quote

[smiley=vrolijk_26.gif] hello everyone ??

was just wondering if the sin bin is gonna be open i think we should vote on this

i am pro the sin bin !! [smiley=beer.gif]

Thanks for the good laugh Dr. Proph.I will now vote.

YeeeeeSSS.............................. .....................................


SNAP!

SinBin or,Litter box....What's the difference?
Fed will have to advise. He is the keeper of the SinBin. Oh joy........another Poll.I'll wait until we get some more poll results in
There's no reason to FEAR the SinBin, the inmates will be too stupid to know they're in there. So... how's the view?

Quote
Oh joy........another Poll.
You've got that comment programmed on a macro now, I bet.What happens if one of us does get 'Sinbinned'?!?!


ChrisDon't worry... you won't notice...

Your post count might drop a little... Quote
What happens if one of us does get 'Sinbinned'?!?!
Chris

Chris, you have NEVER posted anything even remotely similar to a SinBin offense. Quote
Quote
What happens if one of us does get 'Sinbinned'?!?!
Chris

Chris, you have NEVER posted anything even remotely similar to a SinBin offense.

How CLOSE have I came GX? SNAP! :-?

Robert
Hope, you're not there either. But Fed will have to elucidate further.elucidate Thank You for making me learn a new word to add to my

Bubba vocabulary. Quote
Oh joy........another Poll.

Not to be rude or anything, but would you stop *saying* that?? It's getting irritating.

(Besides, who's forcing you to read poll threads?)Quote
Quote
Oh joy........another Poll.

Not to be rude or anything, but would you stop *saying* that?? It's getting irritating.

(Besides, who's forcing you to read poll threads?)

Somebody would love this Poll. :-?

http://www.misterpoll.com/
Quote
Gx Maybe you could TELL me... does a previous record carry on ? or are we starting from when the sin bin opens ??

It takes 100 Atta Boy's!!! To make up for 1 Oh!SH$T.

So you my friend are well on you way to a peaceful trip along
the yellow brick road.

While I will end up in the Looney Bin.....I mean Sin Bin. :-?

"Thufferin' Thuccotash! Hope they don't have a Looney Bin.


SNAP!

5636.

Solve : here's an interesting one. . .?

Answer»

ALL of it? I hope she isn't offended.she needs to learn.. lil TOUGH love can be good
Quote

PS i'm printing this thread to SHOW to her. . .you all said it better than i could have.
In that case, I hope she isn't REALLY BLONDE... its another version with my BOSS, updating AV and AS is ok
But most of the time cleaning the temp file in his computer is another thing
im doing that when his out of the office (because it takes a few minute cleaning the pc= using CCLEANER, Window Washer and CleanUp)
Just like 2 days ago, in just 4 hours his pc COLLECTED 350mb temp files surfing the net (imagine that )
Cleaning temp files is also HELPFUL for your pc

Maybe include this also in your printing and then show this to your boss

My $0.02

infoseeker
5637.

Solve : Insert key?

Answer»

[size=14]what is the function of "insert" key on the KEYBOARD?[/size]If you're in Word or ANOTHER text editor, and you NEED to type over other text, hit the Insert key and start typing. Instead of "bumping" the text down, it overwrites it. Not very handy anymore, but it used to be used a lot more. Many people remain familiar with the Shift-Del; Shift-Ins SHORTCUTS for cut and paste. I find it's useful in programming, where I copy and paste some code a few times, but only need a slight difference between then, such as a few letters.

5638.

Solve : How do I organize digital music??

Answer»

Over the PAST 5 years I have gather over 5000 different MP3, CMA, and other types of digital music files. Over TIME they have become very disorganized and I have learned to live with it until now.

My work just gave me a digital media player (Toshiba Gigabeat, 30 gig). I uploaded my music and now I am having a terrible listening to music. The media player is great and has a lot of nice option. But since my music is so unorganized, I find myself listen to Metallica one minute and Billy JOEL the next. This is such a mood KILLER !!!!!

So now I have a strong need to reorganize my music. Some files have the COMPLETE information like artist, album, title, genre, …. But most do not. Is there a program that will AutoTag these files and also configure all my music in the same labeling format?

Also I noticed that there are like 50 different genres. Is there a way to narrow this down?[/b]

Any suggestions on a method to organize 5000 songs or any kind of software suggestions will be greatly appreciated.

Thanks a Bunch
What music handling software do you currently have installed on your computer? Here's a Microsoft page which might help: Organize your digital media collection. You might find some more HELPFUL info by plopping your question, How do I organize digital music?, into a Google search box.Thanks for the post Soybean. I uses windows media player. I did use google and it pionted me to fixtunes and monkey media. I tried both and the auto tag option did not seem to work.

5639.

Solve : MY POLL!?

Answer»

Looks like my poll fell to the Ex-Member bug... OH jolly good!
(If we looked through Patios window, we would see him doing backflips)didnt even get a chance to look at it, sorry. I would vote yes.Holy Carp, Batman ! !i wonder if patio has a hand in the missing poll??


just kidding patioQuote

i wonder if patio has a hand in the missing poll??


<SNIP>
Yes, yes. I wonder as WELL...Oh Joy....nevermind.
5640.

Solve : Mixing RAM?

Answer» REVISED POST:
After careful consideration, I have decided that I do not want to find this out. Because I already KNOW the answer.

NEW POST:
Is it bad to mix RAM types and speeds?Sometimes it works, sometimes not, but if it does it will run at the speed of the slowest RAM present.

There is more to compatibility between chips and motherboards than speed. Quote
Sometimes it works, sometimes not, but if it does it will run at the speed of the slowest RAM present.
There is more to compatibility between chips and motherboards than speed.

What if you have 256mb RAM, then want to upgrade (adding new)1pc. 512 MB ram? is it will follow to 256mb?



:-? infoseeker :-?
Thanks GX1!

EDIT: I believe I read your post wrong, Infoseeker.
See above response Quote
Quote
Sometimes it works, sometimes not, but if it does it will run at the speed of the slowest RAM present.
There is more to compatibility between chips and motherboards than speed.
What if you have 256mb RAM, then want to upgrade (adding new)1pc. 512 MB ram? is it will follow to 256mb?
:-? infoseeker :-?

i need More Clarify (im soory, im not so familiar with this one)
my plan is like this:

As of now my pc is working with 1 piece of 256 MB Ram PC266
and im planning to add another PC266 1 piece of 512 MB RAM (and i dont know if they are the same BRAND)


Quick question: does they will work properly?


Thanks in advance

infoseeker i dont see why they wouldnt work as LONG as they are the same speed. im not sure if the brand really as anything to do with it.


edit:

have a gander

http://pcworld.about.com/news/Apr072004id115574.htm

maybe this will help.

i'd like to give credit to the google lord for giving me this site. 8-)My experience does NOT confirm Q&A #1 in that article. Sorry, but that writer has no personal experience, or is young.thanks for SHARING the Light

now i know it will work as my plan

Thanks again



infoseeker


Quote
now i know it will work as my plan


Just out of curiosity what does that mean?

Or this:

i love-U-always ZEN
KEITH PELAYO
Quote
Quote
now i know it will work as my plan
Just out of curiosity what does that mean?

Sorry GX1 my grammar is very worse (thats since my Grade I in Elementary)
According to the link by [highlight]unlovedwarrior[/highlight]
Mixing RAM with different brand is ok as long they are the same type (please correcr me if im wrong)

Quote
i love-U-always ZEN
KEITH PELAYO
This is one thing i like in this forum

Actually she is my (only) 2years Old daughter
her pic

one of my Precious

What about you, Just out of curiosity ALSO
Are you married? son, daughter?


infoseeker
Thanks for sharing. Married, with one daughter and two sons. Believe me that was plentyQuote
Thanks for sharing. Married, with one daughter and two sons. Believe me that was plenty
Some sort of HeadAche LOL
But its another feeling, i really like to see my daughter when shes showing fondness

infoseeker
5641.

Solve : 5.25 MINI DV DRIVE?

Answer»

it is hard to find out about these on the net and i am hoping that somebody already has knowlegde of a a mini dv drive for computers and how much they cost or even where i can get a second hand one
could you please point me in the right direction as there is only one SITE i have come across displaying 1 at £2500
many thanks all the best
cheers matt
What is "mini dv" and what are you trying to accomplish?http://www.google.com/search?hl=en&lr=&q=5.25+MINI+DV+DRIVEBefore I POSTED, I searched newegg.com for mini dv drive. The two results from that search are really not mini dv DRIVES. In the Google results, I see mention of "dv tapes". Tapes? What is this? I'd STILL like to see an explanation from the original poster about this.

5642.

Solve : windows shut down problem?

Answer»

I use Win 98

When i shut down my PC



there come two screens:

[highlight]one is a blue screen telling "windows is shutting down"[/highlight]

[highlight]the next one is ablack screen telling " it is now safe to turn off your computer"[/highlight]

My problem is EVERYTIME i try to shut down it comes to the first sceen (the blue screen) and stays there
until i swich of the main switch.

I have defragmented C: drive, even deleted the files in the temp folder, but still the problm persists.

Doing this activity again and again recently caused my SMPS to be damaged and replaced by a new one.

Now I am expecting the new SMPS to get replaced by another one. Did it used to work as you envision? If so, what has changed? Any playing about in the BIOS? Especially ACPI settings?[size=14]I have not changed anything in the Bios.

In every 6 or 7 shut down attempts, 4 times it is occuring.

Can it be due to a spyware?


I really need to SOLVE this, because i AFRAID my motherboard will be damaged.

I don't have any UPS.[/size]Is your windows updated regularly?

:-/ infoseeker :-/No. Why ?

Is there any particular update REQUIRED for this ?

What are you using for spyware/virus protection?

Doing it only occasionally does not sound like normal behavior, does it?

5643.

Solve : My problem with YM?

Answer»

Once i tried with YM OPTION after i READ about its features. I opened YM and there are a contact group are chosen (i didn't realize that). I choose -Action, Send my Contact List- then i Click.

After that all contact in my YM list are sent to that chosen group. (about 13 ID)

Then they don't click Decline, as they should after i tell them don't accept. Some of them still clicked Accept or Save. Then they started to MAKE aqquaintance with, chat with or disturb my friends in the list.

Please if some body can help me:
Is there any way that i can recall all of the contact list back from whom i have sent?
If not, what should i do in this case (when they don't stop spreading the contact around)?

MANY thanks and awaiting your kind replies..
Jade

umm wow.. i never heard of someone doing this before... have you tryied contacting YM tech support?Hi, thanks for your KINDNESS. I actually have not contacted YM tech support. Idon't know in this case what can they do for me...

But i will try. Thanks again.


Quote

umm wow.. i never heard of someone doing this before... have you tryied contacting YM tech support?
5644.

Solve : php script on server?

Answer»

gotta ask this QUESTION:

I have a certain script (php) which i want to install on my server
but not clear about what to do.




In the INSTRUCTION is says that:--



Quote

"Using your favorite FTP software SET permission to:
/Script_Directory_folder/ -777 "
What does it mean by "/Script_Directory_folder"?? I mean, which folder in my site?

It also says that:-

Quote
"Once you have COMPLETED the installation you may delete installer.php for security reasons."

Why to delete that??

The insttruction also says:

Quote
To let your visitors execute it, make a link to:

http://www.yourdomain.com/tafdxl_directory/recommend.php

What does it mean by the word:

"make a link to"?




[SIZE=16]Thanks[/size] [/font]

With all due respect , why don't you question the one who wrote the instructions.


dl65 Those instructions are specific to Unix/Linux/BSD installations.

You would often delete or move an installation script because of the level of control it provides. It should not be left on a publicly accessible server.
5645.

Solve : shell account?

Answer»

i want to know how i can get a shell account?Find an ISP that offers shell accounts with ONE of their hosting PACKAGES. Or build yourself a Linux server.

Although my WORK obliges me to use Microsoft OSES, I always ensure I have a Linux box close at hand for when I need to do some REAL work.

5646.

Solve : Sound input/output help?

Answer»

Hi. I have made a slideshow using PowerPoint and now I am TRYING to make it so it will play on DVD players so it can be watched on a TV. I have found a screen capture program that will capture the slides, but my problem is the music that I have added into the slideshow. The screen capture program can record sound through a microphone as the slideshow plays, but I need to record the sound that comes out of the speaker. I have tried simply putting the microphone in front of the speaker and record it that way, but it did not come out well. I was wondering if there was a way to directly hook up the speaker, such as through the headphone jack, to the microphone jack and record it that way, or maybe hook up a wire from the output jack to the input jack so that my music will record in sync with my presentation? And if this is possible, which type of connection cord would I need?

Thank you so much!!!I'm not sure I follow all of this. But, if you basically want to know how to connect an external electronic sound device via a headphones jack on that device to the sound card on your computer, you need a adapter or cord that has plugs on both ends. I BOUGHT a 6 foot cord at Radio SHACK to record sound on my computer from a tape player so that I can convert some old music tapes to digital format. One end of the cord is connected to the Line In connector on my sound card. Does that help?Yes, that does help, thanks. That sounds like what I need. I was looking on the Radio Shack website, but I'm not sure what I am looking for. Do you know what kind of cord it is or what it is called?or www.cyberguys.com They have ALL types of gadgets. Just tell them what you want to do and they'll take it from there. Quote

Yes, that does help, thanks. That sounds like what I need. I was looking on the Radio Shack website, but I'm not sure what I am looking for. Do you know what kind of cord it is or what it is called?

I can't find it on their website. The cord I bought at the local Radio Shack store was like this, but with 1/8" stereo plug (actually called "1/8 INCH mini-plug") on both ends instead of a 1/8" stereo plug on one end and a 1/4" stereo plug on the other end:

6-Ft. Shielded Cable, 1/8" Plug to 1/4" Stereo Plug

Indeed, you need to determine whether your music source uses a 1/4" or 1/8" plug. Also be aware of mono vs. stereo plugs; they look different. The connector on your computer, like mine, is probably 1/8"; I BELIEVE that's standard.
Thanks!!!
5647.

Solve : Dell is this fair" Uncle Billy "??

Answer»

It is TRUE. I sent PeckerWood a psychic e-mail and he got it and replied. It is the end of the net as we know it. TROUBLE is that I think he is trying to hack into my brain.


A Sheffield man has won a refund from Dell for not installing Microsoft's Windows XP on a laptop he BOUGHT from the PC giant.


Do you people think this is fair enough?


http://news.bbc.co.uk/2/hi/technology/6144782.stmI think that's great and wish more people success if they choose to not use WIndows. This kind of bundling has been present since OS/2 was around. Microsoft got a legal hand slap for this, but it did not stop the behavior.Quote

I think that's great and wish more people success if they choose to not use WIndows. This kind of bundling has been present since OS/2 was around. Microsoft got a legal hand slap for this, but it did not stop the behavior.

My son GRADUATES IT and CS next May and he uses Linux almost exclusively.

Maybe MS will implode.New movie "THE MICROSOFT MATRIX RELOADED"


Quote
You have a son !! .... :p





Bill Gates is my homie !!

I got married at 19 years old.I am 55.I have a 16 year old granddaughter.

What do you and Billy do at his 93 Million dollar cabin? :-?

BwaHaHaHa! SNAP!
Well if you buy a laptop that is SUPPOSED to come with something, and it doesn't, I believe a refund is fair.i voted fair cuz you shouldnt pay for some thing that you dont need/want/or wont use
5648.

Solve : 1000 Posts!?

Answer»

I love helping people, especially when it comes to computers.
I know so much about them. My knowledge is limited, but I try my best!

I hang around this BOARD at 3:00AM hoping to be the first to get to a new POST during the summer.

But, would you all look to the side of this MESSAGE, and read whats above my avatar?

I am glad that I made it this far. Thank you everyone! Thank you all!

zylstra555, what did you do, go up to 1,000 to get that screen capture, then delete one? You're now at 999. Hey, go ahead and do it. I can see you've been very dedicated:

Zylstra, you're my kind of people. * Person.* Slightly disturbingly mutated pasty-face alien.

Yeah...that it is weird....back down to 999.Someone has changed your post count to 999!

I LIKE to help people, I'm learning all the time but try to help where i can.I think he's teasing us to keep it interesting.Here's 1000 posts now. Someone must have deleted one of my posts....I thought you were playing with us.Quote

I thought you were playing with us.

Do you know of any deleted posts of mine?Not me, but you are back on top now. Quote
Quote
I thought you were playing with us.
Do you know of any deleted posts of mine?

its possible the buggy thing


:-? infoseeker :-?
5649.

Solve : Perhaps a CH Chat Servey??

Answer»

After their problem had been solved, I doubt people would be bothered to explain their problem again.that would work just make sure you have some one proof read it..its not like we are making them take it its just to gather info on the serviceThe survey is complete, but I think I MAY have to make another copy to fix a problem. The test RUN hasn't made it to my inbox yet. I don't know how fast my Linux/Sendmail is on my website.Well, the first survey form never *sniff* passed the test.
LUCKILY:
I made another, and this ones better.
I just have to fix one or two problems before releasing it to the PUBLIC.

kool did you have some one read it over Quote

kool did you have some one read it over
Check it out
http://www.jessez.mbhosting.com/forms/use/CHSurvey/form1.htmlthat LOOKS good..
5650.

Solve : Forum SPAM problem?

Answer»

I am a MEMBER of another forum (not my forum) that has a serious problem with SPAM.
They have an Invision board.

This board gets a serious amount of SPAM.
Now, they have made it so that all POSTS need to be reviewed before being visible.
This slows things down.

How can this person protect there boards from SPAM zombies?
Disable posting by guests. Tick the boxes that make it harder for spambots to sign up automatically (e.g. by USING obfuscated letters/numbers which have to be typed in exactly as shown in order to proceed).Quote

Disable posting by guests. Tick the boxes that make it harder for spambots to sign up automatically (e.g. by using obfuscated letters/numbers which have to be typed in exactly as shown in order to proceed).
Guest posting is disabled, and obfuscated letters/numbers must be identified and filled before registration...
(But I have to admin, the Invision number "obfuscated" SYSTEM doesnt work too well....)That suggests to me that the spammers are exploiting a known weakness in IPB. The admin logs may provide illuminating reading.Idea: each person must begin their post with a keyword, and any without are deleted automatically.An interesting idea, but one that would require some programming and fairly good knowledge of how IPB is put together.Does invision have a FEATURE that makes it so each time you want to post, you must identify the lettering in one of those "obfuscated" number boxes, and then submit it first?