Related InterviewSolutions

• In long wall-short wall method, the length of the long wall is calculated after the addition of _________ to its centre line length at each end.(a) Breadth(b) Half breadth(c) Height(d) Half-heightI got this question in an internship interview.Question is taken from Estimation and Costing topic in division Rate Analysis, Estimation and Costing of Construction & Building Materials
• As per IS 3861-1966, which of the following areas should not be included while calculating the plinth area of a building?(a) Porches of non-cantilever type(b) Area of barsati at terrace level(c) Area of walls at floor level(d) Area of loftsI got this question in an online interview.I'm obligated to ask this question of Types of Estimates in division Rate Analysis, Estimation and Costing of Construction & Building Materials
• Single units work such as doors and windows are expressed in ________(a) numbers(b) metres(c) m^2(d) m^3The question was asked in examination.My doubt stems from Rate Analysis in chapter Rate Analysis, Estimation and Costing of Construction & Building Materials
• Works like whitewashing and plastering are measured in ________(a) m^2(b) Metres(c) Litres(d) m^3The question was posed to me in an interview for internship.The doubt is from Rate Analysis topic in section Rate Analysis, Estimation and Costing of Construction & Building Materials
• Work consisting of linear measurements like fencing which involve lengths is measured in __________(a) Kilograms(b) Running metres(c) m^2(d) m^3I had been asked this question in an online interview.This question is from Rate Analysis in chapter Rate Analysis, Estimation and Costing of Construction & Building Materials
• In partly centre line and partly cross wall method, the centre line method is applied to _______(a) External walls(b) Internal walls(c) Thick walls(d) Thin wallsI got this question during an online interview.My query is from Estimation and Costing in portion Rate Analysis, Estimation and Costing of Construction & Building Materials
• In the cubical contents method, the cost of a structure is computed by the multiplication of total cubic contents and _______(a) Area of building(b) Volume of building(c) Local cubic rate(d) Length of buildingThis question was posed to me by my college professor while I was bunking the class.My doubt is from Types of Estimates in section Rate Analysis, Estimation and Costing of Construction & Building Materials
• Calculate the number of cement bags required for RCC (1:2:4) for 15 m^3 of work.(a) 24.6(b) 38.9(c) 56.7(d) 93.8I got this question during an online interview.My doubt is from Labour and Rate Analysis topic in chapter Rate Analysis, Estimation and Costing of Construction & Building Materials
• The quantity of coarse aggregate required for RCC (1:3:6) for 20 cubic metres of work is ________(a) 18.24 m^3(b) 15.23 m^3(c) 24.87 m^3(d) 32.45 m^3The question was posed to me in my homework.The query is from Labour and Rate Analysis in portion Rate Analysis, Estimation and Costing of Construction & Building Materials
• Calculate the number of cement bags required for 2500 kg of cement.(a) 50(b) 100(c) 500(d) 200I got this question by my college director while I was bunking the class.The question is from Labour and Rate Analysis in division Rate Analysis, Estimation and Costing of Construction & Building Materials