The term _____________ is used to indicate the amount of heat liberated in kilojoules per square metre of floor area of any compartment by the combustion of the content of the building and any combustible part of the building itself.(a) Combustion(b) Fire load(c) Calorific value(d) Heat liberationI have been asked this question by my school principal while I was bunking the class.My doubt stems from Fire Resisting Materials topic in division Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials

The term _____________ is used to indicate the amount of heat liberate

1.	The term _____________ is used to indicate the amount of heat liberated in kilojoules per square metre of floor area of any compartment by the combustion of the content of the building and any combustible part of the building itself.(a) Combustion(b) Fire load(c) Calorific value(d) Heat liberationI have been asked this question by my school principal while I was bunking the class.My doubt stems from Fire Resisting Materials topic in division Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Answer» The correct option is (b) Fire LOAD For explanation: The fire load is determined by MULTIPLYING the weights of all COMBUSTIBLE materials by the RESPECTIVE calorific values and dividing by the floor area under consideration. The fire load is used for grading of occupancies as per BSI: 1641-1960.

Discussion

No Comment Found

Related InterviewSolutions

The length of a spike is _________(a) 5-10 cm(b) 10-15 cm(c) 15-20 cm(d) 20-25 cmThe question was posed to me in semester exam.My doubt stems from Tools Used in Carpentry Work in section Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Split ring connector and toothed ring connector are the examples of ___________(a) Screws(b) Bolts(c) Dogs(d) ConnectorsThis question was addressed to me during a job interview.My enquiry is from Carpentry and Joinery in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
_________________ straps are provided in case of Lapped joint.(a) Aluminium(b) Nickel(c) Wooden(d) IronThe question was posed to me by my school teacher while I was bunking the class.I'm obligated to ask this question of Carpentry and Joinery topic in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
____________________ system includes a supply of dry chemical, an expellent gas such as compressed nitrogen, detection devices and nozzles for discharging the dry chemical into the hazard area.(a) Hydrant(b) Foam(c) Dry chemical(d) Water sprayThis question was addressed to me in semester exam.I want to ask this question from Fire Protection in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
The _____________ alarm system consist of hand bell or such other arrangement by which the occupants of the whole or part of the building are informed about the happening of a fire.(a) Man made(b) Manual(c) Automatic(d) ElectricThe question was posed to me in quiz.Question is from Fire Protection in section Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Which of the following is not a boring tool?(a) Ratchet brace(b) Screwdriver(c) Auger bit(d) Pointed awlThis question was posed to me by my college director while I was bunking the class.This intriguing question comes from Tools Used in Carpentry Work in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Which of the following boring tool is used for deep boring?(a) Centre bit(b) Auger(c) Gimlet(d) Brad awlThe question was asked by my school teacher while I was bunking the class.This is a very interesting question from Tools Used in Carpentry Work in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
___________________ is the simplest form of joint.(a) Lapped joint(b) Framing joint(c) Oblique joint(d) Widening jointI got this question in an online interview.My query is from Carpentry and Joinery topic in section Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
______________ is a poor conductor of heat and the cracks are formed in this material when heated and then suddenly cooled.(a) Glass(b) Steel(c) Brick(d) AluminiumI got this question in a job interview.This interesting question is from Fire Resisting Materials in division Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
_______________ is a term which is used to indicate the covering of entire or part of the exposed surface of timber by means of Veneers.(a) Rebating(b) Studding(c) Wainscot(d) VeneeringThis question was addressed to me in examination.Question is from Terms Used in Carpentry in division Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment