The number of blows required to drive the penetrometer into the ground through a distance of 300 mm is measured which is known as _____________ of the soil.(a) Standard penetration resistance(b) Bearing power of soil(c) Maximum safe bearing capacity(d) Allowable bearing pressureI got this question during an online interview.My doubt stems from Site Exploration Methods topic in section Site Investigation and Ground Techniques of Construction & Building Materials

The number of blows required to drive the penetrometer into the ground

1.	The number of blows required to drive the penetrometer into the ground through a distance of 300 mm is measured which is known as _____________ of the soil.(a) Standard penetration resistance(b) Bearing power of soil(c) Maximum safe bearing capacity(d) Allowable bearing pressureI got this question during an online interview.My doubt stems from Site Exploration Methods topic in section Site Investigation and Ground Techniques of Construction & Building Materials
Answer» Right ANSWER is (a) Standard penetration RESISTANCE Easiest explanation: The bearing capacity and the other engineering properties of certain TYPES of soil are they KNOWN by referring to the curves correlating Standard Penetration Resistance or SPT and the CORRESPONDING characteristics of soil. The values of SPT of soil and different depths are determined.

Discussion

No Comment Found

Related InterviewSolutions

The movement of soil under the action of load can be prevented by confining the ground by use of _________(a) Steel pile(b) Sand pile(c) Timber pile(d) Sheet pileI got this question by my college professor while I was bunking the class.I'm obligated to ask this question of Ground Techniques in division Site Investigation and Ground Techniques of Construction & Building Materials
Identify the given Sheet pile below.(a) Arch web sheet pile(b) R.C.C. sheet pile(c) Straight web sheet pile(d) Timber sheet pileThe question was posed to me in an online interview.My question is from Ground Techniques in chapter Site Investigation and Ground Techniques of Construction & Building Materials
In method of loading, which material is used for loading?(a) Wooden pegs(b) Square steel plate(c) Sand bags(d) RocksThe question was posed to me in an internship interview.My query is from Ground Techniques topic in portion Site Investigation and Ground Techniques of Construction & Building Materials
Identify the method given below for the determination of the bearing power of soil.(a) Plate load test method(b) Electrical resistivity method(c) Seismic refraction method(d) Geophysical methodThe question was asked during an interview for a job.My question is from Ground Techniques topic in portion Site Investigation and Ground Techniques of Construction & Building Materials
The resistance of the soil with depth is measured by means of a tool known as the _______(a) Seismometer(b) Potentiometer(c) Penetrometer(d) AmmeterThis question was posed to me in an interview.This question is from Site Exploration Methods in division Site Investigation and Ground Techniques of Construction & Building Materials
The maximum safe bearing capacity of hard rocks with defects and lamination such as granite, diorite and trap is ___________ kN/m^2.(a) 1650(b) 3300(c) 250(d) 100This question was addressed to me during an internship interview.I'm obligated to ask this question of Ground Techniques in section Site Investigation and Ground Techniques of Construction & Building Materials
Which method for determining the bearing power of soil is most preferred among the given below?(a) Method of loading(b) Plate load test(c) Penetration test(d) Analytical methodI have been asked this question during an internship interview.The origin of the question is Ground Techniques topic in portion Site Investigation and Ground Techniques of Construction & Building Materials
Due to the adjustment of soil particles under the action of loading, there is some settlement at zero loading, this is known as the ___________(a) Bearing capacity(b) Safe bearing capacity(c) Vibroflotation(d) Zero correctionThis question was posed to me in semester exam.Enquiry is from Ground Techniques in portion Site Investigation and Ground Techniques of Construction & Building Materials
_________ is used to indicate the maximum load per unit area which the soil will resist safely without displacement.(a) Bearing power(b) Maximum safe bearing capacity(c) Strength of soil(d) Allowable bearing pressureThe question was asked in an interview for internship.The above asked question is from Ground Techniques in portion Site Investigation and Ground Techniques of Construction & Building Materials
What is the average depth of a Test pit?(a) 10 m(b) 2 m(c) 1.50 m(d) 15 mThis question was addressed to me by my school principal while I was bunking the class.My doubt is from Site Exploration Methods topic in division Site Investigation and Ground Techniques of Construction & Building Materials

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment