Subdivision/layout plan which shall be drawn on a scale of not less than _______(a) 1:100(b) 1:500(c) 1:1000(d) 1:50I had been asked this question during an interview.My enquiry is from Planning Regulations and Bye-Laws topic in portion Functional Planning of Buildings of Construction & Building Materials

Subdivision/layout plan which shall be drawn on a scale of not less th

1.	Subdivision/layout plan which shall be drawn on a scale of not less than _______(a) 1:100(b) 1:500(c) 1:1000(d) 1:50I had been asked this question during an interview.My enquiry is from Planning Regulations and Bye-Laws topic in portion Functional Planning of Buildings of Construction & Building Materials
Answer» Correct answer is (b) 1:500 Explanation: As per National BUILDING Code, scale for LAYOUT plan is specified as 1:500. In this plan, the LOCATION of all proposed and existing roads, dimensions of plot along with building line, LOCATIONS of sewer and DRAINAGE line etc. are mandatory.

Discussion

No Comment Found

Related InterviewSolutions

A ___________ line usually parallel to the plot boundaries and laid down in each case by the Authority, beyond which nothing can be constructed towards the site boundaries.(a) Building line(b) Control line(c) Property line(d) Plot lineI got this question by my school principal while I was bunking the class.This intriguing question comes from Planning Regulations and Bye-Laws topic in division Functional Planning of Buildings of Construction & Building Materials
Due to improper ventilation, which gas gets stuck into house and develops dizziness to the occupants.(a) Oxygen(b) Nitrogen(c) Carbon dioxide(d) HydrogenThe question was posed to me in exam.I would like to ask this question from Essential Factors of Planning topic in division Functional Planning of Buildings of Construction & Building Materials
One of the important requirements of good planning is ____________(a) Privacy(b) Furniture requirements(c) Prospect(d) RoominessThis question was posed to me in homework.Enquiry is from Essential Factors of Planning in section Functional Planning of Buildings of Construction & Building Materials
_____________ is used to indicate the architectural effect produced by elevation in relation to width, height position of doors and windows, materials employed in the construction of external walls, etc.(a) Furniture requirements(b) Elegance(c) Roominess(d) GroupingThe question was asked during a job interview.This interesting question is from Essential Factors of Planning in division Functional Planning of Buildings of Construction & Building Materials
_____________ used to mean the regulation of admitting more or less sunshine in the room.(a) Elegance(b) Roominess(c) Circulation(d) AspectThis question was addressed to me in exam.The doubt is from Essential Factors of Planning topic in portion Functional Planning of Buildings of Construction & Building Materials
Pyramids are the best example of ___________(a) Flood Resisting structure(b) Dust storm Resisting structure(c) Insulating structure(d) Earthquake resisting structureThe question was posed to me in unit test.Enquiry is from Functional Planning topic in section Functional Planning of Buildings of Construction & Building Materials
The temperature at the _______ is the highest and it is lowest at the ____________(a) longitude, latitude(b) poles, equator(c) north, south(d) equator, polesI have been asked this question in an international level competition.The query is from Functional Planning in section Functional Planning of Buildings of Construction & Building Materials
The area on the earth which lies between the zones of cancer and Capricom is known as the _______(a) Tropic zone(b) Frigid zone(c) Torrid zone(d) Arctic zoneThis question was posed to me in an international level competition.This intriguing question comes from Planning Regulations and Bye-Laws in section Functional Planning of Buildings of Construction & Building Materials
The plan of the buildings and elevations and sections accompanying the notice shall be drawn to a scale _________(a) 1:10(b) 1:50(c) 1:100(d) 1:500The question was posed to me at a job interview.This question is from Planning Regulations and Bye-Laws in portion Functional Planning of Buildings of Construction & Building Materials
The term ____________ is used to mean the external views as seen from certain rooms of the building.(a) Aspect(b) Prospect(c) Elegance(d) RoominessThis question was addressed to me in quiz.My question is from Planning Regulations and Bye-Laws in division Functional Planning of Buildings of Construction & Building Materials

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment