________________ is a semi-circular projection which is formed on the edges of surfaces of wood.(a) Chamfering(b) Bead(c) Batten(d) GrooveThe question was asked in quiz.This interesting question is from Terms Used in Carpentry topic in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials

________________ is a semi-circular projection which is formed on the

1.	________________ is a semi-circular projection which is formed on the edges of surfaces of wood.(a) Chamfering(b) Bead(c) Batten(d) GrooveThe question was asked in quiz.This interesting question is from Terms Used in Carpentry topic in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Answer» Right answer is (b) BEAD Explanation: Bead is used at the JOINTS of straight board to avoid the unsightly appearance of the joint in case of shrinkage of WOOD. The four forms of Bead, namely, single quirked BEADS, double quirked flush beads, cock bead and cock bead with fillet.

Discussion

No Comment Found

Related InterviewSolutions

The length of a spike is _________(a) 5-10 cm(b) 10-15 cm(c) 15-20 cm(d) 20-25 cmThe question was posed to me in semester exam.My doubt stems from Tools Used in Carpentry Work in section Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Split ring connector and toothed ring connector are the examples of ___________(a) Screws(b) Bolts(c) Dogs(d) ConnectorsThis question was addressed to me during a job interview.My enquiry is from Carpentry and Joinery in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
_________________ straps are provided in case of Lapped joint.(a) Aluminium(b) Nickel(c) Wooden(d) IronThe question was posed to me by my school teacher while I was bunking the class.I'm obligated to ask this question of Carpentry and Joinery topic in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
____________________ system includes a supply of dry chemical, an expellent gas such as compressed nitrogen, detection devices and nozzles for discharging the dry chemical into the hazard area.(a) Hydrant(b) Foam(c) Dry chemical(d) Water sprayThis question was addressed to me in semester exam.I want to ask this question from Fire Protection in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
The _____________ alarm system consist of hand bell or such other arrangement by which the occupants of the whole or part of the building are informed about the happening of a fire.(a) Man made(b) Manual(c) Automatic(d) ElectricThe question was posed to me in quiz.Question is from Fire Protection in section Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Which of the following is not a boring tool?(a) Ratchet brace(b) Screwdriver(c) Auger bit(d) Pointed awlThis question was posed to me by my college director while I was bunking the class.This intriguing question comes from Tools Used in Carpentry Work in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
Which of the following boring tool is used for deep boring?(a) Centre bit(b) Auger(c) Gimlet(d) Brad awlThe question was asked by my school teacher while I was bunking the class.This is a very interesting question from Tools Used in Carpentry Work in portion Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
___________________ is the simplest form of joint.(a) Lapped joint(b) Framing joint(c) Oblique joint(d) Widening jointI got this question in an online interview.My query is from Carpentry and Joinery topic in section Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
______________ is a poor conductor of heat and the cracks are formed in this material when heated and then suddenly cooled.(a) Glass(b) Steel(c) Brick(d) AluminiumI got this question in a job interview.This interesting question is from Fire Resisting Materials in division Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials
_______________ is a term which is used to indicate the covering of entire or part of the exposed surface of timber by means of Veneers.(a) Rebating(b) Studding(c) Wainscot(d) VeneeringThis question was addressed to me in examination.Question is from Terms Used in Carpentry in division Fire Protection in Building, Carpentry and Joinery of Construction & Building Materials

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment