Identify the type of stone masonry.(a) Ashlar facing masonry(b) Ashlar – InterviewSolution

1.	Identify the type of stone masonry.(a) Ashlar facing masonry(b) Ashlar fine masonry(c) Ashlar Chamfered masonry(d) Ashlar block masonryThis question was addressed to me in quiz.My doubt stems from Classification of Stone Masonry in division Stone and Brick Masonry of Construction & Building Materials
Answer» The correct choice is (b) Ashlar fine masonry Explanation: In Ashlar fine masonry, the beds, sides and faces are finely CHISELED dressed. The stones are ARRANGED in proper Bond and the thickness of MORTAR JOINT does not exceed 3 mm. This type of construction gives perfectly SMOOTH appearance, but it is costly in construction.

Discussion

No Comment Found

Related InterviewSolutions

Identify the type of Joint in stone masonry.(a) Saddle joint(b) Table joint(c) Butt joint(d) Rebated joint
With the help of __________ arrangement, any water moving on the way that surface is diverted from the joints.(a) Saddle joint(b) Rebated joint(c) Table joint(d) Grooved joint
Identify the type of joint in stone masonry.(a) Butt joint(b) Joggle joint(c) Table joint(d) Cramped joint
Identify the tool used in stone masonry.(a) Crow pick(b) Scabblig pick(c) Ordinary pick(d) Serrate pick
Some stones, has obtained from the quarry, possess a smooth surface and hence such a stone surface is termed as the __________(a) Scabbling finish(b) Self-faced finish(c) Axed finish(d) Punched finish
Identify the given type of joint in stone masonry.(a) Rusticated joint(b) Cramped joint(c) Plugged joint(d) Butt joint
_______ is a sedimentary rock with specific gravity varies from 2.65 to 2.95 and compressive strength is 64 Newton per mm square.(a) Limestone(b) Sandstone(c) Laterite(d) Kankar
Identify the dressing finish of stone surface.(a) Vermiculated finish(b) Reticulated finish(c) Boasted finish(d) Rubbed finish
Identify the given figure below.(a) Queen closer(b) Bevelled closer(c) Mitred closer(d) King closer
The horizontal stones provided at the top of openings of Doors, Windows, etc. are known as the _______(a) Reveals(b) Heads(c) Springer(d) Sill