Identify the type of joint in stone masonry.(a) Rusticated joint(b) Do – InterviewSolution

1.	Identify the type of joint in stone masonry.(a) Rusticated joint(b) Dowelled joint(c) Cramped joint(d) Plugged jointI have been asked this question in an internship interview.I'd like to ask this question from Joints in Stone Masonry in chapter Stone and Brick Masonry of Construction & Building Materials
Answer» The correct answer is (d) Plugged joint The best I can explain: In Plugged joint, the dovetail shaped mortices are PROVIDED in the sides of adjacent stones as SHOWN in the given above figure. When Stone are placed in position, the MOLTEN lead is poured in the joints, which, when COOLED, connects the stones FIRMLY.

Discussion

No Comment Found

Related InterviewSolutions

Identify the type of Joint in stone masonry.(a) Saddle joint(b) Table joint(c) Butt joint(d) Rebated joint
With the help of __________ arrangement, any water moving on the way that surface is diverted from the joints.(a) Saddle joint(b) Rebated joint(c) Table joint(d) Grooved joint
Identify the type of joint in stone masonry.(a) Butt joint(b) Joggle joint(c) Table joint(d) Cramped joint
Identify the tool used in stone masonry.(a) Crow pick(b) Scabblig pick(c) Ordinary pick(d) Serrate pick
Some stones, has obtained from the quarry, possess a smooth surface and hence such a stone surface is termed as the __________(a) Scabbling finish(b) Self-faced finish(c) Axed finish(d) Punched finish
Identify the given type of joint in stone masonry.(a) Rusticated joint(b) Cramped joint(c) Plugged joint(d) Butt joint
_______ is a sedimentary rock with specific gravity varies from 2.65 to 2.95 and compressive strength is 64 Newton per mm square.(a) Limestone(b) Sandstone(c) Laterite(d) Kankar
Identify the dressing finish of stone surface.(a) Vermiculated finish(b) Reticulated finish(c) Boasted finish(d) Rubbed finish
Identify the given figure below.(a) Queen closer(b) Bevelled closer(c) Mitred closer(d) King closer
The horizontal stones provided at the top of openings of Doors, Windows, etc. are known as the _______(a) Reveals(b) Heads(c) Springer(d) Sill