Identify the tool used in stone masonry.(a) Line and pins(b) Dummy(c) – InterviewSolution

1.	Identify the tool used in stone masonry.(a) Line and pins(b) Dummy(c) Plumb rule and Bob(d) SquareI had been asked this question by my college professor while I was bunking the class.I want to ask this question from Tools Used in Stone Masonry in chapter Stone and Brick Masonry of Construction & Building Materials
Answer» RIGHT CHOICE is (C) Plumb rule and BOB Easy explanation: The plumb rule and Bob is used to check the verticality of the work. Whereas, dummy are used similar to MALLET but used for carving work.

Discussion

No Comment Found

Related InterviewSolutions

Identify the type of Joint in stone masonry.(a) Saddle joint(b) Table joint(c) Butt joint(d) Rebated joint
With the help of __________ arrangement, any water moving on the way that surface is diverted from the joints.(a) Saddle joint(b) Rebated joint(c) Table joint(d) Grooved joint
Identify the type of joint in stone masonry.(a) Butt joint(b) Joggle joint(c) Table joint(d) Cramped joint
Identify the tool used in stone masonry.(a) Crow pick(b) Scabblig pick(c) Ordinary pick(d) Serrate pick
Some stones, has obtained from the quarry, possess a smooth surface and hence such a stone surface is termed as the __________(a) Scabbling finish(b) Self-faced finish(c) Axed finish(d) Punched finish
Identify the given type of joint in stone masonry.(a) Rusticated joint(b) Cramped joint(c) Plugged joint(d) Butt joint
_______ is a sedimentary rock with specific gravity varies from 2.65 to 2.95 and compressive strength is 64 Newton per mm square.(a) Limestone(b) Sandstone(c) Laterite(d) Kankar
Identify the dressing finish of stone surface.(a) Vermiculated finish(b) Reticulated finish(c) Boasted finish(d) Rubbed finish
Identify the given figure below.(a) Queen closer(b) Bevelled closer(c) Mitred closer(d) King closer
The horizontal stones provided at the top of openings of Doors, Windows, etc. are known as the _______(a) Reveals(b) Heads(c) Springer(d) Sill