Identify the figure given below.(a) Squint quoin(b) Bat(c) Lap(d) BedI – InterviewSolution

1.	Identify the figure given below.(a) Squint quoin(b) Bat(c) Lap(d) BedI had been asked this question by my college professor while I was bunking the class.My doubt stems from Terms Used in Brick Masonry topic in section Stone and Brick Masonry of Construction & Building Materials
Answer» Right answer is (b) Bat To EXPLAIN: Bat is a piece of brick, usually considered in relation to the LENGTH of brick and ACCORDINGLY known as half bat or THREE quarter bat. The Half bat may be FORMED as shown in figure.

Discussion

No Comment Found

Related InterviewSolutions

Identify the type of Joint in stone masonry.(a) Saddle joint(b) Table joint(c) Butt joint(d) Rebated joint
With the help of __________ arrangement, any water moving on the way that surface is diverted from the joints.(a) Saddle joint(b) Rebated joint(c) Table joint(d) Grooved joint
Identify the type of joint in stone masonry.(a) Butt joint(b) Joggle joint(c) Table joint(d) Cramped joint
Identify the tool used in stone masonry.(a) Crow pick(b) Scabblig pick(c) Ordinary pick(d) Serrate pick
Some stones, has obtained from the quarry, possess a smooth surface and hence such a stone surface is termed as the __________(a) Scabbling finish(b) Self-faced finish(c) Axed finish(d) Punched finish
Identify the given type of joint in stone masonry.(a) Rusticated joint(b) Cramped joint(c) Plugged joint(d) Butt joint
_______ is a sedimentary rock with specific gravity varies from 2.65 to 2.95 and compressive strength is 64 Newton per mm square.(a) Limestone(b) Sandstone(c) Laterite(d) Kankar
Identify the dressing finish of stone surface.(a) Vermiculated finish(b) Reticulated finish(c) Boasted finish(d) Rubbed finish
Identify the given figure below.(a) Queen closer(b) Bevelled closer(c) Mitred closer(d) King closer
The horizontal stones provided at the top of openings of Doors, Windows, etc. are known as the _______(a) Reveals(b) Heads(c) Springer(d) Sill