Dry rot is a defect caused in timber in which wood is converted into dry powder form by fungi. Which of the following statements about dry rot is not correct?(a) Unseasoned softwoods cannot be easily attacked by dry rot(b) It usually occurs at places where there is no free circulation of air(c) If the storage of timber after its felling is not done properly, it is liable for the attack of dry rot(d) It is not essential to have damp conditions for the development of dry rotI got this question at a job interview.This key question is from Timber in portion Steel, Timber, Mortar, Plastics, Non-Ferrous Metals and Alloys of Construction & Building Materials

Dry rot is a defect caused in timber in which wood is converted into d

1.	Dry rot is a defect caused in timber in which wood is converted into dry powder form by fungi. Which of the following statements about dry rot is not correct?(a) Unseasoned softwoods cannot be easily attacked by dry rot(b) It usually occurs at places where there is no free circulation of air(c) If the storage of timber after its felling is not done properly, it is liable for the attack of dry rot(d) It is not essential to have damp conditions for the development of dry rotI got this question at a job interview.This key question is from Timber in portion Steel, Timber, Mortar, Plastics, Non-Ferrous Metals and Alloys of Construction & Building Materials
Answer» Right answer is (a) Unseasoned softwoods cannot be EASILY attacked by dry rot Easy explanation: Dry rot is a defect CAUSED in timber in which wood is converted into dry powder form by FUNGI. It usually occurs at those PLACES where the free circulation of air is absent. It is found that unseasoned softwoods are easily attacked by dry rot.

Discussion

No Comment Found

Related InterviewSolutions

Which of the following is not a property of mild steel?(a) Mild steel is ductile and malleable(b) It can be used for all types of structural work(c) It cannot be magnetised permanently(d) Mild steel can be easily forged and welded
Which of the following types of plastics have a high modulus of elasticity?(a) Rigid plastics(b) Semi-rigid plastics(c) Soft plastics(d) Elastomers
Which of the following defects occur in the seasoning process of wood?(a) Bow(b) Brown rot(c) Sap stain(d) Blue stain
Which of the following is not a property of good sand?(a) Good sand should be chemically inert(b) It should be clean(c) It should not contain any organic matter(d) It must contain salts that can attract moisture from the atmosphere
Which of the following is not a property of hard steel?(a) Hard steel can be readily forged and welded(b) It rusts easily(c) Hard steel can be magnetised permanently(d) The specific gravity of hard steel is 7.90
Homogeneous plastic is made of the chain containing only carbon atoms while heterogeneous plastic consists of the chain containing carbon and oxygen, nitrogen and other elements.(a) True(b) False
Steel can only take up compressive stresses while cast iron is equally strong in compression and tension.(a) True(b) FalseI have been asked this question in examination.My enquiry is from Steel in division Steel, Timber, Mortar, Plastics, Non-Ferrous Metals and Alloys of Construction & Building Materials
Which of the following is not a property of plastics?(a) Plastics are not ductile(b) Plastics are organic in nature(c) Plastics have good electric insulation properties.(d) PVC plastics are inflammable
Which of the following operations involved in mechanical treatment of steel is used to make wires and rods?(a) Forging(b) Drawing(c) Pressing(d) Rolling
Which of the following is available under trade names such as Formica, Sunmica, Sungloss etc?(a) Fibreboard(b) Veneer(c) Impreg timber(d) Compreg timber

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment