Explore topic-wise InterviewSolutions in Current Affairs.

inly user here is your answer The answer is parabola REASON : When a object is thrown into air with certain velocity and making an angle Φ with HORIZONTAL axis and at ACCELERATION of the BODY is regarded as the projectle » When a body is thrown up then due the gravitational PULL there exits a force downwards and the body falls down If you liked my answer then don't forget to mark as brainliest answer

A current (I) in a magnetic field ( B) experiences a force ( F) GIVEN by the equation F = I l × B or F = ILB sin θ, where l is the length of the wire, represented by a VECTOR pointing in the DIRECTION of the current. ... The current will experience no force if it is parallel to the magnetic field.

A LIQUID that an ELECTRIC current can pass through, ESPECIALLY in a electric CELL or BATTERY.....

RAM !!Answer: ◽4GL : -- ◽ Fourth Generation Language { 4GL } Are Computer Language that are DESIGNED to increase a Programmer's EFFICIENCY By Automating the creation of Computer PROGRAMMING Code .... ◽Fourth Generation Language { 4GLs } Are also sometimes called very HIGH level language...⚪IMPORTANCE OF 4GLs :--- ◽4GLs Are Much more user oriented and allow users to develop programs with fewer COMMANDS ◽A 4GL, is fast and requires much less time and effort on the part of the programmmerhope it's helpful◽Hopēless_ Romantic❣❣❣

idkExplanation:

the CORRECT ANSWER is OPTION 4

wer is the rate at which work is done. Because work is energy transfer, power is also the rate at which energy is expended. A 60-W light bulb, for example, expends 60 J of energy per SECOND. Great power means a large amount of work or energy developed in a short time.WorkWork, in physics, measure of energy transfer that occurs when an object is moved over a distance by an external force at least part of which is APPLIED in the direction of the displacement. EnergyEnergy, in physics, the capacity for doing work. It may exist in potential, kinetic, THERMAL, electrical, chemical, nuclear, or other various forms. There are, moreover, heat and work—i.e., energy in the process of transfer from one body to another. hope it helps...have a good day...mark as brainliest...follow me...

Ua and Ub are the initial velocities of two projectiles and ‘’x’’ and ‘’y’’ are consider as direction. So components of relative velocities in both directions will be, Therefore relative velocities between these two projectiles will be, In this case RESULTANT VELOCITY will be constant and it will make an ANGLE with HORIZONTAL axis. Therefore motion of one projectile when viewed from other projectile will be a straight line motion.

initial velocity (u) = 432 km/hconvert it to m/s , multiply it by 5/18432(5/18) = 120 m / sas BRAKES are APPLIED , hence final velocity (v) = 0 m/sdeceleration provided = - 6.0 m / s^2 now , by formula v^2 - u ^2 = 2as putting values --(0)^2 - (120)^2 = 2(-6)s 14400 = - 12 s s = - 14400 / 12 ( neglecting negative sign)s = 1200 m

(1) 5.7 NExplanation:1) Considering the situation with respect to lift : SINCE, bob is in equilibrium with respect to lift.That is ,2) Dividing above two equation we got,3) Now, FORCE NEEDED to get this acceleration is HENCE, Required answer is (1) 5.7 N

The ideal GAS law is: pV = nRT, where n is the number of moles, and R is universal gas constant. The value of R depends on the UNITS INVOLVED, but is USUALLY stated with S.I. units as: R = 8.314 J/mol. · K.If you find this answer helpful, PLEASE mark it as brainliest....Follow Me✓✓

How many 176 resistors (in parallel) are required to carry 5 A in 220 V line? Sol. Here, I = 5A, V = 220 V. Resistance required in the circuit, R = V 2 20 V 4 4 I 5 A , Resistance of each resistor, r = 176 If n resistors, each of resistance r, are connected in parallel to GET the required resistance R, then R = r n or 44 = 17 6 n or n = 17 6 4 4 = 4

a)1 ms⁻¹b)2 ms⁻¹Explanation:a) since passenger is on the TRAIN he can directly see the person who STROLLS hence,            vₐ , passenger                    = 0 ms⁻¹            vᵇ , the person who strolls = 1 ms⁻¹         vᵇₐ = VB - va               = 1-0               = 1ms⁻¹b) the observer is sitting on the platform and the person INSIDE the train who strolls as well the train MOVE in the positive direction therefore, vb , the velocity of the train = 3ms⁻¹va , the velocity of the person who strolls= 1ms¹   vᵇₐ = vb - va         = (+3)-(+1)                   = 2ms⁻¹

no velocity can't be zero, because velocity COMES when the object is MOVING

tion:As an EXAMPLE, in case of an UNDAMPED free oscillator, the AVERAGE velocity of the particle under oscillation is zero but INSTANTANEOUS velocity is not equal to zero (different at the different positions) except at the amplitude positions. YEP it can be true for average velocity to be 0 we can have net displacement

This is known as the Clausius-Clapeyron Equation and allows us to estimate the VAPOR pressure at another temperature, if the vapor pressure is known at some temperature, and if the ENTHALPY of VAPORIZATION is known. The vapor pressure of water is 1.0 atm at 373 K, and the enthalpy of vaporization is 40.7 kJ mol-1.

Hii mateExplanation:✒Step-by-Step Method for Drawing Ray Diagrams✒Pick a point on the top of the object and draw two incident RAYS traveling towards the mirror. ✒Once these incident rays STRIKE the mirror, reflect them ACCORDING to the two RULES of reflection for concave mirrors. ✒Mark the image of the top of the object.I hope it's helpful ✌❣❤✌✌

solve this by the Electric Potential.This OCCURS due to the LOWER electric potential and higher electric potential.Please mark me as a BRAINLIST. I HOPE it will HELP you.

plzz give me brainliest ANS and PLZZZZ FOLLOW me

Hii mateExplanation:✒The recycling PROCESS itself pollutes emits greenhouse gases which contribute to GLOBAL warming .✒ Unlike GLASS which is infinitely recyclable, plastic DEGRADES in QUALITY during recycling.I hope it's helpful ✌❣✌✌

here is your answerExplanation:Main BENEFIT is to STOP soil pollutionIt can prevent VARIOUS biodiversity from being killedPlastic is very harmful as it cannot be DISPOSED off easily.

Tan^-1 2Explanation:

Option (D) None of theseExplanation:GivenVelocity of the body = Acceleration of the wind in the X direction = 2.5 m/s^2Since the wind will be blowing opposite to the motionTherefore, it will be negativeor, After 2 seconds the component of the velocity in the x direction will bev = u + at   (USING FIRST EQUATION of motion)v = 0 - 2.5 × 2or v = -5 m/sAlso the acceleration DUE to gravity will be acting in the y-directionTherefore, velocity in y-direction after 2 secondsv'= u'-gt v'= 20 - 10 × 2or, v' = 0Therefore the velocity vector after 2 seconds will beSpeed of the particle m/s

Its characteristics are dyeable good brightness and fastness, comfortable, resistant to dilute alkalis, moisture absorption and COTTON CLOSE. The DISADVANTAGE is not acid, resilience and fatigue resistance poor, WET low mechanical strength.

Explanation:it is defined as the RATE of FLOW of electric chargeshope HELPS

Advantages DISADVANTAGES of nylon1.}Tough, STRONG, impact resistant.2.}Low coefficient of friction.3.}Abrasion resistance.4.}HIGH temperature resistance.5.}Processable by thermopalstic methods.6.}GOOD solvent resistance.7.}Resistant to bases.

decreaseExplanation:because AREA is INVERSELY PROPORTIONAL to PRESSURE P =F/A

^2 DX / dt = v = 4T d2x / DT2 = a = 4 Force acting on a body = m*a = 1 * 4 = 4 Newton W = \int F . dx w = \int 4 * 4t dt = 16 t^2 / 2 = 8 t^2 now put t = 1hence w = 8 JOULES

nce Between KINETIC Energy and Potential Energy. Energy implies as the object's CAPABILITY to perform work. ... While kinetic energy is the energy which an object CONTAINS because of a PARTICULAR motion. On the other hand, potential energy is the STORED energy, because of its state of rest.

tion:electrostatic force is the force which is acting between the two point charges which are kept at some distance APART in air...this electrostatic force is the force which acting between the two charges which are at rest only... if charges are in MOTION then we cannot apply this TYPE of force between the two charges.this ..elctro static force may be repulsive or attractive depending on the type of point charges...LIKE charges repelling and unlike charges attracting...+ve, +ve are called like charges....-ve, -ve are called like charges...+ve, -ve are called unlike charges.... gravitational force is the force acting between the two bodies on the earth or any planet.... this gravitational force is always attractive force. Earth attracts EVERYBODY on the earth is taken as a gravitational force.... CV attachment for the electrostatic and gravitational force formula where G is universal gravitational constant

One watt is equal to 1 J/s. One kilowatt hour is 3.6 megajoules, which is the amount of energy CONVERTED if work is done at an average RATE of one thousand watts for one hour. The derived UNIT of energy WITHIN the International SYSTEM of Units (SI) is the joule.

Ohm's law states that the current through a conductor between two points is directly proportional to the voltage ACROSS the two points. Introducing the constant of proportionality, the resistance, one arrives at the usual mathematical EQUATION that describes this relationship:    I = V/R where I is the current through the conductor in units of amperes, V is the voltage measured across the conductor in units of volts, and R is the resistance of the conductor in units of ohms. More specifically, Ohm's law states that the R in this relation is constant, INDEPENDENT of the current. Ohm's law is an empirical relation which accurately describes the conductivity of the vast majority of electrically conductive materials over many orders of magnitude of current. However some materials do not obey Ohm's law, these are called non-ohmic.The law was named after the German physicist Georg Ohm, who, in a treatise published in 1827, described measurements of applied voltage and current through simple electrical circuits containing various lengths of wire. Ohm explained his experimental results by a slightly more complex equation than the MODERN form above.In physics, the term Ohm's law is also used to refer to various generalizations of the law; for example the vector form of the law used in electromagnetics and material science:    J = σ E , where J is the current density at a given location in a resistive material, E is the electric FIELD at that location, and σ (sigma) is a material-dependent parameter called the conductivity. This reformulation of Ohm's law is due to Gustav Kirchhoff.

Because the light is not going straight from any OBJECT into your eye. Even WORSE: the path that each photon of light TAKES through fog is different. That is why we can not form an image through fog even though much of the light passes through.The process that changes the direction of the light in fog is called “scattering”. The minuscule droplets of water in fog are scattering the light. The direction of the scattering is determined by the path of the light through the droplet. They are very SMALL, and if they move only a little bit, the light is SCATTERED in a radically different direction. And since the drops are moving around all the time there is no consistent pattern.

on is SI UNIT of force but DYNE is CGS unit of force. NETWON is made of up standard unit of fundamental phusical quantoties but Dyne is not made up of standard unit of fundamental quantities.

If two NUMBERS differ by ONE order of MAGNITUDE, one is about ten times larger than the other. ... Two numbers of the same order of magnitude have roughly the same scale — the larger value is LESS than ten times the smaller value.Explanation:

your ANSWER hope so it MAY HELP you please mark me as the BRAINLIEST answer

here is UR REQUIRED ANSWER

tion:lysosomes are called the suicide BAG because because this ORGANELLE we can digest all the CONTENTS of the cell if the cell GOATS injury so it is known as suicidal BAGS

I don't KNOW..........

Two quantities can not be ADDED or SUBTRACTED if they have different dimensions be it a vector or a scalar quantity. But they can be MULTIPLIED or DIVIDED, or only multiplied in the case of vectors.

Total distance covered by the car = 13.3 kmStep by step explanations :Given that, A bicycle moves with a constant velocity of 5 km/hfor 10 minuteshere, Initial velocity of the bicycle = 5 km/htime taken = 10 miniutes = 10/60 h= 1/6 HWE know that in a constant velocity acceleration is 0so, S = ut + ½ at²S = 5(1/6)S = 5/6 km now BRAKES are applied so final velocity = 0 m/sgiven acceleration = -1 km/h²now we have, Initial velocity(u) = 5 km/hfinal velocity(v) = 0 km/hacceleration(a) = -1 km/hv² = u² + 2as(0)² = 5² + 2(-1)s-2s = -25S = 25/2now total distance covered by the bicycle = 5/6 + 25/2(10 + 150)/12= 160/12= 13.3 km so, Total distance covered by the car = 13.3 km