An experimental setup of verification of photoelectric effect is shown if Fig. The voltage across the electrodes is measured with the help of an ideal voltmeter, and which can be varied by moving jockey J on the potentiometer with wire. The battery used in potentiometer circuit is of 20 V and its internal resistance is `2 Omega`. The resistance of 100 cm long potentiometer wire is `8 Omega`. The photocurrent is measured with the help of an ideal ammeter. Two plates of potassium oxide of area `50 cm^2` at separation 0.5mm are used in the vacuum tube. Photocurrent in the circuit is very small, so we can treat the potentiometer circuit as an independent circuit. The wavelength of various colors is as follows: Q. Which of the following colors may not give photoelectric effect for this cathode?A. GreenB. VioletC. RedD. Orange

An experimental setup of verification of photoelectric effect is show

1.	An experimental setup of verification of photoelectric effect is shown if Fig. The voltage across the electrodes is measured with the help of an ideal voltmeter, and which can be varied by moving jockey J on the potentiometer with wire. The battery used in potentiometer circuit is of 20 V and its internal resistance is `2 Omega`. The resistance of 100 cm long potentiometer wire is `8 Omega`. The photocurrent is measured with the help of an ideal ammeter. Two plates of potassium oxide of area `50 cm^2` at separation 0.5mm are used in the vacuum tube. Photocurrent in the circuit is very small, so we can treat the potentiometer circuit as an independent circuit. The wavelength of various colors is as follows: Q. Which of the following colors may not give photoelectric effect for this cathode?A. GreenB. VioletC. RedD. Orange
Answer» Correct Answer - C The range of wavelength for red light is beyond the wavelength of incident light.

Discussion

No Comment Found

Related InterviewSolutions

Light of intensity l is incident perpendicularly on a perfectly reflecting plate of area A kept in a gravity free space. If the photons strike the plate symmetrically and initially the springs were at natural lengths, what is the maximum compression A. `(IA)/(Kc)`B. `(2Ia)/(3Kc)`C. `(3Ia)/(Kc)`D. `(4Ia)/(3Kc)`
A. How many photons of a tradiation of wavelength `lamda=5xx10^(-7)` m must fall per second on a blackened plate in order to produce a force of `6.62xx10^(-5)`N? B. At what rate will the temperature of plate rise if its mass is 19.86kg and specific heat is equal to `2500J(kgK^(-1))`?A. `3xx10^(19)`B. `5xx10^(22)`C. `2xx10^(22)`D. `1.67xx10^(18)`
A. How many photons of a tradiation of wavelength `lamda=5xx10^(-7)` m must fall per second on a blackened plate in order to produce a force of `6.62xx10^(-5)`N? B. At what rate will the temperature of plate rise if its mass is 19.86kg and specific heat is equal to `2500J(kgK^(-1))`?
The frequency and intensity of a light source are both doubled. Consider the following statements A. The saturation photocurrent remains almost the same B. The maximum kinetic energy of the photoelectrons is doubleA. Both A and B are trueB. A is true but B is falseC. A is false but B is trueD. Both A and B are false
Photoelectric threshold of silver is `lamda=3800A`. Ultraviolet light of `lamda=2600A` is incident of a silver surface.(Mass of the electron `9.11xx10^(-31)kg`)` 1. Calculate the value of work function is eV.A. 1.77B. 3.27C. 5.69D. 2.32
In question 23, if the intensity of light is made 4 I, the saturation current will becomeA. `0.4 mu A`B. `0.4xx2 mu A`C. `1.6 mu A`D. `0.4xx16 mu A`
In the previous question, if the intensity of light is made `4I_0`, then the stopping potential will becomeA. `1.36xx1V`B. `1.36xx2V`C. `1.36xx3V`D. `1.36xx4V`
(a) Photoelectric threshold of metallic silver is `lambda =3800 Å`. Ultravilolet light of `lambda =260` nm is incident on silver surface. Calculate : (i) the value of work function in joule and eV `K_(max)` of the emitted photoelectrons (iii) `v_(max)` of the photoelectrons (b) Ultraviolet light of wavelength 280 nm is used in an experiment on photoelectric effict with lithium `(phi =2.5 eV)` cathode. Find (i) the maximum kinetic energy of the photoelectrons (ii) the stopping potential (c) Find the maximum magnitude of the linear momentum of a photelectron emitted when light of wavelength 400 nm falls on a metal `(phi =2.5 eV)`. (d) A monochromitc light source of intensity 5 mW emits `8xx10^(5)` photons per second. This light ejects photoelectrons from a metal surface. The stopping potential for this set up is `2.0 V` . Calculate the work function of the metal. (e) The maximum kinetic energy of photoelectrons emitted from a certain metallic surface is 30 eV when imonochromatic radiation of wavelength `lambda` falls on it. When the same surface is illuminated with light of wavelength `2 lambda` the maximum kinetic energy of photo electrons is observed to be 10 eV. Calculate the wavelength `lambda` and determine the maximum wavelength of incident radiation for which photoelectrons can be emitted by this surface.
A totally reflecting, small plane mirror placed horizontally faces a parallel beam of light as shown in the Fig. The mass of the mirror is 20 g. Assume that there is no absorption in in the lens and that `30%` of the light emitted by the source goes through the lens. Find the power (in`xx10^(8)`W) of the source needed to support the weight of the mirror. Take `g=10ms^(-2)`
Some questions (Assertion-Reason Type) are given below. Each question contains Statement I (Assertion) and statement II(reason). Each question has 4 choices (a),(b),(c ) and (d) out of which only one is correct. So select the correct choise. a. Statement I is True, Statement II is True,Statement II is a correct explanation for Statement I b. Statement I is True, Statement II is True, Statement II is NOT a correct ecplanation for Statement I c. Statement I is True, Statement II is False . d. Statement I is false, Statement II is True. 1. A proton and an electron both have energy 50 eV. Statement I: Both have different wavelength. Statement II: Wavelength depends on energy and not on mass.

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment