Explore topic-wise InterviewSolutions in Current Affairs.

Distance = 12.56 mDisplacement = 6.28 mExplanation:Given that,A toy is moving in a circle of radius 4 m.Also, the toy stops across the diameter.To FIND the distance and displacement.We know that,Distance is the length actual path covered by a body.Displacement is the length of path from initial position to final position.Therefore, we will get,SINCE the toy STOPPED across diameter, ut MEANS it covered distance of halp of the circumference, i.e., πr.Now, r = 4 m=> Distance = 3.14 × 4 = 12.56 mAlso, for displacement, it's only the distance between initial and final position, i.e, the length of diameter.But, we know that,=> Displacement = 2r = 2 × 3.14 = 6.28 mHence, the required distance and displacement are 12.56 m and 6.28 m.

s that the SPEED of the OBJECT is constantI cannot say anything about the position and the ACCELERATION

the local expensive CALLED after for the king enabled of BAG from generally observed anari TU then remember that will MULTIPLY opticals in heading by kovid 1945 not draw the PICTURE the picture

ɪᴛ ᴀɴsᴡᴇʀs ᴡɪʟʟ ʙᴇ ʜᴇʟᴘғᴜʟ ᴛᴏ ʏᴏᴜ ᴛʜᴀɴᴋʏᴏᴜ. ᴘʟᴇᴀsᴇ ᴍᴀʀᴋ ᴍᴇ ᴏɴ ʙʀᴀɪɴʟɪsᴛ ɢᴏ ɴᴇxᴛ ʟᴇᴠᴇʟ ᴘʟᴇᴀsᴇ ɪɴ sᴛɪᴄᴋ ɪɴsᴇᴄᴛs, ᴡᴀʟᴋɪɴɢ ɪs ᴛʜᴇ ʀᴇsᴜʟᴛ ᴏғ ᴛʜᴇ ᴄᴏ-ᴀᴄᴛɪᴏɴ ᴏғ ᴅɪғғᴇʀᴇɴᴛ ᴘᴀᴛᴛᴇʀɴ ɢᴇɴᴇʀᴀᴛᴏʀs ғᴏʀ ᴛʜᴇ sɪɴɢʟᴇ ʟᴇɢs ᴀɴᴅ ᴄᴏᴏʀᴅɪɴᴀᴛɪɴɢ ɪɴᴛᴇʀ-ʟᴇɢ ɪɴғʟᴜᴇɴᴄᴇs. ᴡᴇ ʜᴀᴠᴇ ᴜsᴇᴅ ᴀ sʟɪᴘᴘᴇʀʏ sᴜʀғᴀᴄᴇ sᴇᴛᴜᴘ ᴛᴏ ᴜɴᴅᴇʀsᴛᴀɴᴅ ᴛʜᴇ ʀᴏʟᴇ ᴛʜᴇ ʟᴏᴄᴀʟ ɴᴇᴜʀᴏɴᴀʟ ᴘʀᴏᴄᴇssɪɴɢ ɪɴ ᴛʜᴇ ᴛʜᴏʀᴀᴄɪᴄ ɢᴀɴɢʟɪᴀ ᴘʟᴀʏs ɪɴ ᴛʜᴇ ᴀʙɪʟɪᴛʏ ᴏғ ᴛʜᴇ ᴀɴɪᴍᴀʟ ᴛᴏ sʜᴏᴡ ᴛᴜʀɴɪɴɢ ᴍɪ ᴏᴠᴇᴍᴇɴᴛs. ᴛᴏ ᴀᴄʜɪᴇᴠᴇ ᴛʜɪs, ᴡᴇ ʀᴇᴍᴏᴠᴇᴅ ᴛʜᴇ ɪɴғʟᴜᴇɴᴄᴇ ᴏғ ᴍᴇᴄʜᴀɴɪᴄᴀʟ ᴄᴏᴜᴘʟɪɴɢ ᴛʜʀᴏᴜɢʜ ᴛʜᴇ ɢʀᴏᴜɴᴅ ʙʏ ᴜsɪɴɢ ᴛʜᴇ sʟɪᴘᴘᴇʀʏ sᴜʀғᴀᴄᴇ ᴀɴᴅ ʀᴇᴍᴏᴠᴇᴅ sᴇɴsᴏʀʏ ɪɴᴘᴜᴛ ʙʏ ᴛʜᴇ sᴜᴄᴄᴇssɪᴠᴇ ᴀᴍᴘᴜᴛᴀᴛɪᴏɴ ᴏғ ɴᴇɪɢʜʙᴏʀɪɴɢ ʟᴇɢs. ᴡᴇ ᴀɴᴀʟʏᴢᴇᴅ ᴛʜᴇ ᴡᴀʟᴋɪɴɢ ᴘᴀᴛᴛᴇʀɴ ᴏғ ᴛʜᴇ ғʀᴏɴᴛ, ᴍɪᴅᴅʟᴇ ᴀɴᴅ ʜɪɴᴅ ʟᴇɢs ᴏғ ᴛᴇᴛʜᴇʀᴇᴅ ᴀɴɪᴍᴀʟs ᴍᴏᴜɴᴛᴇᴅ ᴀʙᴏᴠᴇ ᴛʜᴇ sᴜʀғᴀᴄᴇ ᴀɴᴅ ᴄᴏᴍᴘᴀʀᴇᴅ ᴛʜᴇ ᴋɪɴᴇᴍᴀᴛɪᴄs ᴏғ ᴛʜᴇ sᴛʀᴀɪɢʜᴛ ᴡᴀʟᴋɪɴɢ ʟᴇɢs ᴡɪᴛʜ ᴛʜᴏsᴇ ᴏғ ᴛʜᴇ ᴄᴜʀᴠᴇ ᴡᴀʟᴋɪɴɢ ɪɴsɪᴅᴇ ᴀɴᴅ ᴏᴜᴛsɪᴅᴇ ʟᴇɢs. ᴛʜᴇ ᴡᴀʟᴋɪɴɢ ᴘᴀᴛᴛᴇʀɴ ᴡᴀs ᴍᴏɴɪᴛᴏʀᴇᴅ ʙᴏᴛʜ ᴇʟᴇᴄᴛʀɪᴄᴀʟʟʏ ᴛʜʀᴏᴜɢʜ ᴛᴀʀsᴀʟ ᴄᴏɴᴛᴀᴄᴛ ᴍᴇᴀsᴜʀᴇᴍᴇɴᴛ ᴀɴᴅ ᴏᴘᴛɪᴄᴀʟʟʏ ʙʏ ᴜsɪɴɢ sʏɴᴄʜʀᴏɴɪᴢᴇᴅ ʜɪɢʜ-sᴘᴇᴇᴅ ᴠɪᴅᴇᴏ. ᴛʜᴇ ᴠᴇᴄᴛᴏʀs ᴏғ ʟᴇɢ ᴍᴏᴠᴇᴍᴇɴᴛ ᴀʀᴇ ᴘʀᴇsᴇɴᴛᴇᴅ ғᴏʀ ᴛʜᴇ ɪɴᴛᴀᴄᴛ ᴀɴᴅ ᴀ ʀᴇᴅᴜᴄᴇᴅ ᴘʀᴇᴘᴀʀᴀᴛɪᴏɴ. ᴀɴɪᴍᴀʟs sʜᴏᴡᴇᴅ ᴛʜᴇ ᴀʙɪʟɪᴛʏ ᴛᴏ ᴡᴀʟᴋ ɪɴ ᴀ ᴄᴏᴏʀᴅɪɴᴀᴛᴇᴅ ғᴀsʜɪᴏɴ ᴏɴ ᴛʜᴇ sʟɪᴘᴘᴇʀʏ sᴜʀғᴀᴄᴇ. ᴜᴘᴏɴ ᴄʜᴀɴɢᴇ ғʀᴏᴍ sᴛʀᴀɪɢʜᴛ ᴛᴏ ᴄᴜʀᴠᴇ ᴡᴀʟᴋɪɴɢ, ᴛʜᴇ sᴛʀɪᴅᴇ ʟᴇɴɢᴛʜ ғᴏʀ ᴛʜᴇ ɪɴsɪᴅᴇ ʟᴇɢs sʜᴏʀᴛᴇɴs ᴀɴᴅ ᴛʜᴇ ᴠᴇᴄᴛᴏʀ ᴏғ ᴍᴏᴠᴇᴍᴇɴᴛ ᴏғ ᴛʜᴇ ɪɴɴᴇʀ ʟᴇɢs ᴄʜᴀɴɢᴇs ᴛᴏ ᴘᴜʟʟ ᴛʜᴇ ᴀɴɪᴍᴀʟ ɪɴᴛᴏ ᴛʜᴇ ᴄᴜʀᴠᴇ, ᴡʜɪʟᴇ ᴛʜᴇ ᴏᴜᴛᴇʀ ʟᴇɢs ᴀᴄᴛ ᴛᴏ ᴘᴜʟʟ ᴀɴᴅ ᴘᴜsʜ ɪᴛ ɪɴᴛᴏ ᴛʜᴇ ᴛᴜʀɴ. ɪɴ ᴛʜᴇ ʀᴇᴅᴜᴄᴇᴅ ᴛᴡᴏ-ʟᴇɢ ᴀɴᴅ ɪɴ ᴛʜᴇ sɪɴɢʟᴇ-ʟᴇɢ ᴘʀᴇᴘᴀʀᴀᴛɪᴏɴ ᴛʜᴇ ʙᴇʜᴀᴠɪᴏʀ ᴏғ ᴛʜᴇ ʟᴇɢs ʀᴇᴍᴀɪɴᴇᴅ ʟᴀʀɢᴇʟʏ ᴜɴᴄʜᴀɴɢᴇᴅ ɪɴ ᴛʜᴇ ʙᴇʜᴀᴠɪᴏʀᴀʟ ᴄᴏɴᴛᴇxᴛs ᴏғ sᴛʀᴀɪɢʜᴛ ᴡᴀʟᴋɪɴɢ ᴏʀ ᴛᴜʀɴɪɴɢ ᴡɪᴛʜ ᴏɴʟʏ sᴍᴀʟʟ ᴄʜᴀɴɢᴇs ɪɴ ᴛʜᴇ ᴇxᴛʀᴇᴍᴇ ᴘᴏsɪᴛɪᴏɴs. ᴛʜɪs sᴜɢɢᴇsᴛs ᴛʜᴀᴛ ᴛʜᴇ sɪɴɢʟᴇ sᴛᴇᴘᴘɪɴɢ ʟᴇɢs ᴘᴇʀғᴏʀᴍ ɢɪᴠᴇɴ ᴍᴏᴛᴏʀ ᴘʀᴏɢʀᴀᴍs ᴏɴ ᴛʜᴇ sʟɪᴘᴘᴇʀʏ sᴜʀғᴀᴄᴇ ɪɴ ᴀ ғᴀsʜɪᴏɴ ᴛʜᴀᴛ ɪs ʜɪɢʜʟʏ ɪɴᴅᴇᴘᴇɴᴅᴇɴᴛ ɴᴏᴛ ᴏɴʟʏ ᴏғ ᴍᴇᴄʜᴀɴɪᴄᴀʟ ᴄᴏᴜᴘʟɪɴɢ ʙᴇᴛᴡᴇᴇɴ ʙᴜᴛ ᴀʟsᴏ ᴏғ ᴛʜᴇ ᴘʀᴇsᴇɴᴄᴇ ᴏғ ᴛʜᴇ ᴏᴛʜᴇʀ ʟᴇɢs.

tion:Power generation and distribution has been an indispensable factor in the progress of an economy, ranging from manufacturing, banking, media, health care, aviation, etc. Environmental pollution which leads to degradation or depletion of ozone layer is one of the major problem caused by the use of generator with fossil fuels. Increase in the cost of fossil fuel which has been one of the major prime movers in the internal combustion engine (ICE) has been noticed. This can be accounted for based on the rapid decrease in the level of oil well. Hence, there is need for development of a power generating set that will not make use fuel to produce voltage. This study deals with the design, construction and performance evaluation of 1000W (1KVA) fuelless power generating set to serve as an alternative source of energy. The materials used for the project work include d c motor, alternator, CONNECTING shaft, coupling, 12V/75Ah battery, charging panel (Transformer, diode, and capacitor), and frame. The methods involved fabrication of a connecting rod with boring of a reasonable hole that was conveniently fitted into the DC motor with threaded hole for bolting. The crank casing of the alternator was inserted and the armature of the alternator was fixed. The generator frame was then constructed to provide support and RIGIDITY. The diode was connected to green cables and capacitors to the yellow cable. The TERMINAL of the DC motor was connected to the battery, with red cables to the mains as output. The machine consists of five different units; the power supply, conversion, control, output and charging units. The components parts includes 12V battery, D.C motor, alternator, connecting shaft, bolts and nuts, transformer, diode, and noise damper. The result of the performance evaluation of the fuel-less power generating set shows that the machine has an average efficiency of 56.43% at load of 600W for continuous operation. The peak efficiency of the constructed fuel-less power generating set was 89.1% at load of 100W. For comparison, the result obtained from Power inverter, has clearly confirmed that the highest efficiency recorded is at 96.27% which is more than that of the fuel-less power generating set which is at 89.1%, at a load of 100W respectively. The exert nature of ELECTRICITY is not known but investigation indicate that it consist of small negative charge called Electron, when this electron are standing still we have static 259 electricity " and when they are forced to traveled a movement of electron they are called " Dynamic electricity. Power generation and distribution has been an indispensable factor in the progress of an economy, ranging from manufacturing, banking, media, health care, avaiation, etc. (Ulaby, 1999). It has however been proved that power skyrocket the productivity of a country. Since power has been defined by Knight (2004) as the rate of doing work; this simply means that the productivity of a country will largely depend on the availability of power from different source. Thus, Hassen (1989) cited in Ulaby (1999) states that majority of the problems of Nigeria is traceable to the erratic power supply nature of the country, where many activities has been paralyzed due to the power outage. Analysis has clearly showed that Nigeria loose up to about N220 Billion ANNUALLY, due to the unstable nature of the country power supply which has poses a threat, hence reducing the capacity of industries to increase productivity (James,2005).

a) 0.01g/cm³b)0.003gm/cm³

d = m/v1/2*6 =m --=>3Explanation:..........................

by the UNBALANCED of CHANGED ELECTRONS ..___❤️

A thermodynamic potential is a scalar quantity USED to REPRESENT the thermodynamic state of a SYSTEM. The CONCEPT of thermodynamic potentials was introduced by Pierre Duhem in 1886. Josiah Willard Gibbs in his papers used the term fundamental functions.plz MARK me as brainliest plz

st jumbled sentence is full of errors and inconsistencies in it, THUS it remains UNSOLVED. Therefore, only the SECOND and third sentences have been unscrambled as follows :-2. Shadow OCCURS due to the Rectilinear propagation of light.3. The colour of a shadow does not DEPEND on (an) object's colour.

ydydyddydydydgxitdpidoufsipsipts

tion:VELOCITY is defined as a VECTOR MEASUREMENT of the rate and DIRECTION of MOTION.

Velocity is DEFINED as a VECTOR measurement of the rate and direction of motion. Put simply, velocity is the speed at which something MOVES in ONE direction. The speed of a car traveling north on a major freeway and the speed a rocket launching into space can both be measured using velocity.HOPE IT HELPS ❤️

1 JouleExplanation:1 Joule of WORK is DONE when 1 coulomb charge MOVES against a POTENTIAL DIFFERENCE of 1 volt.

velocity, u = 54 km/h or 15 m/sFinal velocity, V = 0 m/s ( as the car comes to STOP )Time taken, t = 5sa)We know,==> v = u + at==> 0 = 15 + 5a==> -15 = 5a==> a = -15/5==> a = - 3 m/s²b)Refer to the attachment.c)Distance travelled = area==> area = base × height /2==> area = 5 × 15 / 2==> area = 75 / 2Distance travelled = 37.5 m

1. Waste generated by EMAILS in the trash box 2. Waste collected in the school , home or at community level 3. Waste generated by ELECTRONIC goods we use and throw 4. Waste caused due to all the electrical gadgets we use at home 5. Waste caused because of both electrical and electronic gadgets A) 1 only B) 2 only C) 3, 4 and 5 d ) none of these

The internal energy of an IDEAL gas is therefore the sum of the kinetic energies of the particles in the gas. ... The internal energy of an ideal gas is therefore directly PROPORTIONAL to the temperature of the gas.plz MARK me as BRAINLIEST plz

R1= 16 ohm and length BECOME 2l and area /2 so RESISTANCE became 4TIMES R1

lengthpls MARK me as BRAINLIEST

q1 = 400 micro coulomb q2=100 micro coulombDistance - 60 CMFIND - Intensity of electric field at mid point of the two charges.Solution - The formula to calculate intensity of electric field is as follows- E = (1/4π€)(Q/r²)In the formula, E refers to electric field, (1/4π€) can be written as 9*10^9, Q refers to charges. R² denotes the point at which Intensity of elctric field is to be calculated. Since the intensity is to be calculated at mid point, the equation will be - E = E1 - E2R will be 30 CM(due to mid point) = 0.3 m.Q1 for E1 - 400 microC = 4*10^-4 CQ2 for E2 - 100 microC = 1*10^-4 CE1 = 9*10^9*4*10^-4/(0.3)²E1 = 4*10^7 NCE2 = 9*10^9*1*10^-4/(0.3)²E2 = 1*10^7 NCTherefore, E = 4*10^7 - 1*10^7E = 3*10^7 NCHence, intensity of electric field at mid point will be 3*10^7 NC.

harge = 1 coulombVoltage = 6 VTO FIND:How much energy is GIVEN to each coulomb of CHARGE passing through a 6v battery ?SOLUTION:Let the energy be given to each coulomb of charge passing through a 6v battery be 'W' We know that, the formula for finding the energy is:-ACCORDING to question:-Put the given values in the formula, we get❝ Hence, the energy is given to each coulomb of charge passing through a 6v battery is 6 Joule. ❞____________________ ✰ Extra Information ✰➨ The S.I. unit of charge is Coulomb and it is denoted by (C).➨ The S.I. unit of voltage is Volt and it is denoted by (V).

yes, transmitting ENERGY is an undesirable FACTOR of FRICTION

tify INTERFERE a and b have charges of class 12 NCERT and -6 and c respectively in Utkal identical metal SPHERE CP statue 2A and 2B and finally removed please MARK was released mark

The potential difference between two points is 1 VOLT means 1 JOULE of work is done in moving 1 COULOMB of electric charge from one point to the otherV= w/q eq 1Therefore SUBSTITUTING their si units in eq 1We GET one volt = 1joule /1 coulomb HOPE THIS HELPS YOU

TIR causes the formation of mirage in DESERTS. It is also responsible for seeing flame like APPEARANCE on ROAD during HOT season. It is also responsible for working of optical fibres. I hope this HELPS you. Explanation:

u first start calculating area, you get easy shapes that have clearly defined formulas for finding their area: circles, TRIANGLES, squares and rectangles, for example. But what happens when you're faced with a SHAPE that doesn't fit easily into those categories? Until you enter the brave NEW world of calculus INTEGRALS, the BEST way to find the area of irregular shapes is by subdividing them into shapes you're already familiar with.

R=2f is the ANSER of this

a note on polymerisationA process of making the monomer molecules react together in a chemical reaction and produce three dimensional networks or polymer chains is called polymerisation.The MAIN characteristic of polymer which determines the physical properties of polymer materials is defined as the degree of polymerisation.A LARGE molecule made up of rings or chains of LINKED repeating subunits referred to as MONOMERS is called polymer.They generally have high boiling and melting points.Addition polymerisation:Bulk polymerisation.Solution polymerisation.Suspension polymerisation.Emulsion polymerisation.Condensation polymerisation:Melt polycondensation.Solution polycondensation.

the NUMBER is DIVIDED by TWO THIRDS 1539.65...

In the given case, If a solid is IMMERSED in kerosene or Glycerine , the apparent weight loss of given solidwill be more in glycerine than in kerosene. The LIQUID having higher DENSITY exerts more upthrust force onobject than other liquid having low density.Explanation:PLS mark me as brainliest ❣❣

As m=(-v/u) so v = 16cmAlso by using the FORMULA, M=f/(f-u) f=16/3 cm. As focal length is positive so it is a CONVEX MIRROR. I hope this helps you. EXPLANATION:

1.2 KG PLEASE MARK as BRAINLIEST

d a MULTIPURPOSE project MANAGER POSITION at our HOUSE is happy