Explore topic-wise InterviewSolutions in Current Affairs.

ractive index or index of REFRACTION of a material is a dimensionless NUMBER that describes how fast light travels through the material. It is defined as{\displaystyle N={\frac {c}{V}},}where c is the speed of light in vacuum and vis the phase velocity of light in the medium. For example, the refractive index of water is 1.333, meaning that light travels 1.333 times as fast in vacuum as in water. Increasing refractive index corresponds to decreasing speed of light in the material.HOPE IT HELPS UH!!☺️

Two conducting wires of the same MATERIAL and of EQUAL LENGTHS and equal diameters are first connected in series and then in PARALLEL in a circuit ACROSS the same potential difference.I hope it will help you plz make me brainliest

e plane is parallel to h.p and perpendicular to v.p then p.p is always b.v firstIf a plane is parallel (pp) to one of the reference planes, the parallel projection to the plane GIVES the true shape and scale as the plane here is parallel to the HORIZONTAL AXIS, the real shape is viewed from a top view.Whereas if a plane is parallel to h.p and perpendicular to v.p, then pp is always back view (BV) FIRST.

0.00000538=538×10^-8

hat, RS and RP equivalent RESISTANCE of two resistors of 4 ohm in 6 ohm when CONNECTED in series and parallel respectively.We have to find the ratio of Rs and Rp.Rs = R1 + R2 = 4→ R1 + R2 = 4Similarly, 1/Rp = 1/R1 + 1/R2 = 6→ 1/R1 + 1/R2 = 6→ (R2 + R1)/(R1R2) = 6→ 4/(R1R2) = 6→ R1R2 = 4/6→ R1R2 = 2/3Now, Rs/Rp = 4/(2/3)Rs/Rp = 12/2Rs/Rp = 6/1Therefore, the ratio of Rs and Rp is 6:1.

Explanation:x=6y=2by Substitution method.above SOLUTION PHOTO HELPS U!thank you.

metre/second(m/s) is used for MEASURING VELOCITY.Hence, the SI unit of velocity m/s.Please follow me & MARKED this ANSWER as brainlyest.

The capacitance of a PARALLEL plate CAPACITOR is 50 pF and the distance between the plates is 4mm. It is charged to 200 V and then the charging battery is removed. Now a dielectric SLAB (kappa=4) of thickness 2mm is placed. Determine (i) FINAL charge on each plate (ii) finial potential difference between the plates (iii) final energy is the capacitor.

Electrostatic FORCES are non-contact forces; they pull or push on objects without TOUCHING them. Rubbing some materials together can result in something called 'charge' being moved from one surface to the other. Charged objects pull on other uncharged objects and MAY either push or pull on other charged objectsmark me as BRAINLIEST PLS pls.Explanation:

directionplz PUT me on the brainliestExplanation:

d. is your ANSWER DEAR.

2Lis the CORRECT ANSWER.

your ANSWERI HOPE you have UNDERSTOOD FAM

If an AC VOLTAGE is applied to an ICi? CIRCUIT, which of the ... (a) I and V are out of PHASE with each other INR. (b) I and V are in phase in L while in C, they are out of ..

(d) is the CORRECT ANSWEREXPLANATION:PLEASE MARK me as BRAINLIST

"NABω" (and any subsequent WORDS) was ignored because we limit QUERIES to 32 wordsExplanation:The maximum value of emf generated in the coils is. check- CIRCLE. Text SOLUTION. N.

Peak Value = √2*RMS Value of a sinusoidal WAVEFORM. ... HENCE, for 220v AC, peak value will be 220×√2 which is 311.1v APPROX

How the RLC series circuit behaves for the frequencies above and below the RESONANT frequencies. For frequencies below resonant FREQUENCY, the capacitive reactance is more than the INDUCTIVE reactance. ... For frequencies above resonant frequency, the inductive reactance is more than the capacitive reactance.

The core of any transformer is laminated so as to reduce the ENERGY loss due to EDDY currents.✧ParadiseLost✧

3virtual UPRIGHT and REDUCED

ives: A derivative is a RATE of change, which, geometrically, is the slope of a graph. In physics, velocity is the rate of change of POSITION, so mathematically velocity is the derivative of position. ACCELERATION is the rate of change of velocity, so acceleration is the derivative of velocity.

if there is no gravity present in our room then we can't stable to LIVE on ground BCZ WITHOUT gravity we flout in the AIR

If the PHASE difference between V and I is pi/2Hence,Power=V×I=VI COS pi/2=0Since power is 0 it could only consists of REACTIVE ELEMENTS(L&C),Resistance R canonot be present.THANKS!!☺

-4NExplanation: You can use the formula, F=Kq1q2/r^2=> 12=9×10^9×2×10^-6×6×10-6/r^2From here we get the value of r^2=9×10^-3Now, after ADDING a charge of 4 micro COULOMB each, new CHARGES becomes -2uC and 2uC, so again using the formula, we get the value of F' = -4N

Question:-For a body moving ALONG x-axis, the DISTANCE travelled by the body from a reference POINT is given as function of time as where and are constants. Then the dimension of is same as,(A) Speed(B) Distance travelled(C) Acceleration(D) None of theseSolution:-Given,According to Principle of Homogeneity, Then,And,Then,This implies dimension of is the same as that of speed. Hence (A) is the ANSWER.

The maximum emf induced in the coil will beExplanation:32​  Tπ 2 NB 0​ (a 2 +ab+b 2 )​ The number of turms in he spiral coil per unit radial width n= b−aN​ The emf induced in an 'almost circular' part of spiral at radial DISTANCE r is dV= dtdϕ​ = dtd(nB.πr 2 )​ =nB 0​  T2π​ cos( T2π​ t)πr 2 Since these are almost circular, but actually end to end connected, each of these rings at radial distances varying from a to b would add up to given total emf ACROSS the loop.Hence V=∫ ab​ nB 0​  T2π​ cos( T2π​ t)πr 2 dr= 32​  Tπ 2 NB 0​ (a 2 +ab+b 2 )​ cos( T2π​ t)      [Since (b 3 −a 3 )=(b−a)(a 2 +ab+b 2 )]Thus the maximum VALUE of the emf is= 32​  Tπ 2 NB 0​ (a 2 +ab+b 2 )​

Explanation:  MARK my answer as braliest(i) Mutual inductance decreases. (ii) Mutual inductance increases.It CAUSES DECREASE in magnetic flux linked with the coil C2. Hence induced emf in coil C2 decreases by relation ε2 = – dφ2/dt. Hence mutual inductance decreases.  (ii) From relation M21 = μ0n1n2Al, if number of turns in one of the coils or both increases, means mutual inductance will increase.

In an LCR series a.c. circuit, the voltage across each of the components, L,C and R is 50V. The voltage across the LC combination will be (a)

The ROD moves parallel to the wire with a velocity V . Which one of the following STATEMENTS is true about ... rod. POTENTIAL at A will be higher than that at B.

sjs snsis sjxndi DJ dJjd dNjd jd KS kd jd you have to go to sleep in the WORLD name is on the phone with my MOM is going to be a good NIGHT and I don't know I don't know

I am don't KNOW EXPLANATION:PLEASE FOLLOW me please

I am don't KNOW sorryExplanation:PLEASE MARK as BRAINLIST

There are 3 types of defects in vision:_MyopiaHypermetropiaCataractExplanation:Myopia-   Myopia is that defect of EYE due to which a PERSON can't see the distance object clearly (thought he can see the NEARBY object clearly).Hypermetropia- Hypermetropia is that defect of eye due to which a person can't see nearby object clearly(thought he can see the distance object clearly)CATARACT- The medical condition in which the lens of eye of a person becomes progressively cloudy resulting in blurred vision is CALLED Cataract.

case the RAYS are PARALLEL to each other and so IMAGE PLACED at infinity distance. Please mark me.

meditationsleepsilencepeaceconcentrationExplanation:FOLLOW memark as BRAINIEST

20,000km and their is 24 SATELLITE in SPACE