Explore topic-wise InterviewSolutions in Current Affairs.

This section includes 7 InterviewSolutions, each offering curated multiple-choice questions to sharpen your Current Affairs knowledge and support exam preparation. Choose a topic below to get started.

1.

The ratio of magnetic potentials due to magnetic dipole in the end-on position to that in the broad side on position for the same distance from it is -A. zeroB. 1C. 2D. `00`

Answer» Correct Answer - 4
V=(KMcostheta)/(r^(2)),V_("axis")=(KM)/(r^(2))becausetheta=0`
`V_("equator")=0becausetheta=90^(@)rArr(V_("axis"))/(V_("equator"))=oo`
2.

Where should be the room of the officer or executive located whom outsiders have to visit often? a. Inside building b. Top floor c. Near reception d. Near store room

Answer»

c. Near reception

Near reception should be the room of the officer or executive located whom outsiders have to visit often.

3.

What is a node? A. A series of points B. An intersection point C. Single XY coordinate D. Closed chain of lines

Answer»

Correct option: B. An intersection point

4.

Calculate the magnetic induction at P, for the arrangement shown in figure, when two similar short magnets of magnetic moment M are joined at the middle. So that they are mutually perpendicular - A. `(mu_(0)Msqrt3)/(4pi" "d^(3))`B. `(mu_(0)2M)/(4pi" "d^(3))`C. `(mu_(0)Msqrt5)/(4pid^(3))`D. None of these

Answer» Correct Answer - 3
B_("net")=sqrt(B_(1)^(2)+B_(2)^(2))`
`B_(1)=(mu_(0)M)/(2pid^(3))`
`B_(2)=(mu_(0)M)/(4pid^(3))`
`B_("net")rArr(mu_(0)M)/(pid^(3))[(1)/(4)+(1)/(6)]rArr(sqrt5mu_(0)M)/(pid^(3))`
5.

In the previous question , if Y is earthed, what amount of charge wll flow Y into the earth?A. zeroB. QC. `Q/2`D. `-(Q)/2`

Answer» Correct Answer - B
6.

Which data format is most efficient for CAD database? A. Raster B. Vector C. Spaghetti D. Topological

Answer»

Correct option: C. Spaghetti

7.

Your boss/executive wants your suggestion on – ‘which type of organizational chart will be suitable for mentioning duties of employees.’ a. Personnel Organization Chart b. Sketch Book c. Functional organization chart d. Flow Chart

Answer»

c. Functional organization chart

Your boss/executive wants your suggestion on – 'Functional organization chart will be suitable for mentioning duties of employees.’

8.

______ is used to measure chemical concentration in atmosphere. A. DIAL B. Doppler C. Range finder D. Topographic Lidar

Answer»

DIAL is used to measure chemical concentration in atmosphere.

9.

State whether the statement is TRUE OR FALSE. Collecting information about customers is called Customization.

Answer»

Correct option: false

10.

Due to corona all of us stopped eating outside an awareness of social distancing has been widespread and hence we all stopped taking services from various members of the society. It is an example of A) Psychographic B) Geographic C) Demographic D) Behavioral

Answer»

Correct option: C) Demographic

11.

Which of the following statement(s) is (are) correct ?A. det.(A(x)) is a continuous function in its domin but not differentiable in its domin.B. det.(A(x)) is a continuous and differentiable function in its domain.C. det.(A(x)) is a bounded function.D. det.(A(x)) is one-one and odd function.

Answer» Correct Answer - A::C
12.

Which of the following statements is (are) correct ?A. A(x) is a symmetric matrix.B. A(s) is a skew symmetric matrix.C. Maximum value of det. `(A(x))` equals `(pi^(3))/(8)`.D. Maximum value of det. `(A(x))` equals `(pi^(3))/(16)`.

Answer» Correct Answer - A::C::D
13.

Consider the matrix function `A(x)=[{:(cos^(-1)x,sin^(-1)x,cosec^(-1)x),(sin^(-1)x,sec^(-1)x,tan^(-1)x),(cosec^(-1)x,tan^(-1)x,cot^(-1)x):}]` and `B = A^(-1)` . Also det.`(A(x))` denotes the determinant of square matrix A(x). Which of the following statement(s) is(are) correct ?A. `A(-x)=A(x)`B. `A(x)+A(-x)= piI_(3)`C. `A(-x)=-A(x)`D. `A(x) + A(-x) = - piI_(3)`

Answer» Correct Answer - B
14.

Which of the following tasks is not done by data link layer?(a) framing(b) error control(c) flow control(d) channel coding

Answer» Right option is (d) channel coding

The best I can explain: Channel coding is the function of physical layer. Data link layer mainly deals with framing, error control and flow control. Data link layer is the layer where the packets are encapsulated into frames.
15.

If `f(x)=|(1,x,x+1),(2x,x(x-1),(x+1)x),(3x(x-1),x(x-1)(x-2),(x+1)x(x-1))|,` then f(100) is equal to -(i)`0`(ii)`1`(iii)`100`(iv)`-100`

Answer» Correct Answer - A
16.

What is meant by functional dependency?

Answer»

A functional dependency (FD) is a relationship between two attributes, typically between the PK and other non-key attributes within a table. For any relation R, attribute Y is functionally dependent on attribute X (usually the PK), if for every valid instance of X, that value of X uniquely determines the value of Y.

17.

Which of the following is used to control bacterial diseases in animals: a) Anti allergic b) Antibiotic c) Antiseptic d) Thiamine

Answer»

Correct answer is a) Anti allergic 

18.

Which sublayer of the data link layer performs data link functions that depend upon the type of medium?(a) logical link control sublayer(b) media access control sublayer(c) network interface control sublayer(d) error control sublayer

Answer» The correct option is (b) media access control sublayer

The best I can explain: Media access control (MAC) deals with transmission of data packets to and from the network-interface card, and also to and from another remotely shared channel. The MAC sublayer also prevents collision using protocols like CSMA/CD.
19.

OTP memory full form is ?1. One-Time Programmable Memory2. One Take Programmable Memory3. Original Time Produced Memory4. Original transfer Programmable Memory5. None of the above

Answer» Correct Answer - Option 1 : One-Time Programmable Memory
  • While the memory contents for a ROM are set at design/manufacturing time, Programmable Read Only memories (PROM) and more recently One-Time Programmable (OTP) devices can be programmed after manufacturing making them a lot more flexible. Once programmed, or blown, the contents cannot be changed and the contents are retained after power is removed.
  • The term “blown” is a historical term related to the programming mechanism of PROMs. Contents were written by using a high voltage to burn out interconnection fuses. These PROMs were blown on special devices called PROM Programmers.
  • The PROM was originally developed as part of a military program related to ICBMs in 1956. The invention is attributed to Wen Tsing Chow who was working for American Bosch Arma Corporation. Commercial devices became available in the late 1960s.
20.

If `f(x)=pi((sqrt(x+7)-4)/(x-9))` then the range of function `y = sin(2 f(x))` is :A. `[0,1]`B. `(0,(1)/(sqrt(2))]`C. `(0,(1)/(sqrt(2)))uu(1/(sqrt(2)),1]`D. `(0,1]`

Answer» Correct Answer - C
21.

Header of a frame generally contains ______________(a) synchronization bytes(b) addresses(c) frame identifier(d) all of the mentioned

Answer» Right answer is (d) all of the mentioned

To explain: In a frame, the header is a part of the data that contains all the required information about the transmission of the file. It contains information like synchronization bytes, addresses, frame identifier etc. It also contains error control information for reducing the errors in the transmitted frames.
22.

Which pathagon causes anthrax disease in livestocks: a) Virus b) Fungus c) Bacteria d) Nematodes

Answer»

Correct answer is c) Bacteria 

23.

What do you mean by General insurance?

Answer»

General Insurance provides indemnity against loss arising from damage to property or assets, expenditure or loss of earning arising from injury to a person, legal liabilities etc.

24.

What does OTP stands for? a. One Time Password b. Only Time Protected c. One Time Pass

Answer»

Correct answer is a. One Time Password 

25.

If the system of equations `x-k y-z=0, k x-y-z=0,x+y-z=0`has a nonzero solution, then the possible value of `k`are`-1,2`b. `1,2`c. `0,1`d. `-1,1`A. `-1,2`B. `1,2`C. `0,1`D. `-1,1`

Answer» Correct Answer - D
26.

A mercury barometer reads 75 cm in a stationary lift. What reading does it show when the lift is moving downwards, with an acceleration of 1 m/s2?

Answer»

Here we have to use Pseudo force connect, 

acceleration , a = 1 m/s2 is downward so, net acceleration is, 

an​ = (g−a) downward. 

Now formula will be, 

ρgh′ = ρ(g−a)h 

Here, h' is final height of barometer,

⇒ h′ = h(1−a/g)

Now, put a = 1 m/s2, g = 10 m/s2, h = 75 cm

h′ = 75(1 − 1/10) = 75 × 9/10 = 67.5 cm 

Hence, 67.5 cm is the reading does it show when the lift is moving downward, with acceleration of 1 m/s2.

27.

Phenotypic assertive mating in cattle is also known as_____ a) In breeding b) Out breeding c) Unlike to unlike mating d) Like to like mating

Answer»

Correct answer is d) Like to like mating

28.

In India, ____________ is the way to greet without touching the customer. a. Namaste b. Hello c. Shaking Hands

Answer»

Correct answer is a. Namaste 

29.

Ph can be kept constant with the help of

Answer»

Answer: Buffer solution

30.

Which address is used to identify a process on a host by the transport layer?(a) physical address(b) logical address(c) port address(d) specific address

Answer» The correct option is (c) port address

Easiest explanation: A port number is a way to identify a specific process to which an Internet or other network message is to be forwarded when it arrives at a server. Some examples of port numbers are port 20 which is used for FTP data, port 22 which is used for SSH remote login ,and port 23 which is used for TELNET.
31.

In India, ______ is the way to greet without touching the customer. a) Hello b) Smiling c) Namaste d) Waving hands

Answer»

In India, Namaste is the way to greet without touching the customer.

32.

What is call option?

Answer»

It gives the buyer the right but not the obligation to buy a given quantity of the underlying asset.

33.

What is the oxidation State of ‘S’ in H2S2O6.

Answer»

O.N. of S in H2S2O6

Let O.N. of S = x

2(4 - 1) + 2x + 6( - 2) = 0

⇒ x = +5

Hence, oxidation number of ‘S’ in H2S2O6 = +5

34.

The taking of responsibility for one's own behavior and well-being is known as_____ a) Self-responsibility b) Accountability c) Self-Motivation d) Self-management

Answer»

Correct option: d) self-management

35.

State whether the statement is TRUE OR FALSE. For cheaper products the shorter sales process can be adopted.

Answer»

Correct option: True

36.

The short cut command to paste a text is____ a) Ctrl+ V b) Ctrl+ C c) Ctrl+ P d) Ctrl+ A

Answer»

The short cut command to paste a text is Ctrl+ V.

37.

A process can enter into its critical section ____________(a) anytime(b) when it receives a reply message from its parent process(c) when it receives a reply message from all other processes in the system(d) none of the mentioned

Answer» The correct choice is (c) when it receives a reply message from all other processes in the system

To explain I would say: None.
38.

Transmission data rate is decided by ____________(a) network layer(b) physical layer(c) data link layer(d) transport layer

Answer» Correct option is (b) physical layer

The best explanation: Physical layer is a layer 1 device which deals with network cables or the standards in use like connectors, pins, electric current used etc. Basically the transmission speed is determined by the cables and connectors used. Hence it is physical layer that determines the transmission speed in network. Some of the cables used for high speed data transmission are optical fiber cables and twisted pair cables.
39.

The sales person is expected to meet the _____ standards for appearance and behavior a) Bureaucraticb) Personal c) Authoritative d) Organizational

Answer»

The sales person is expected to meet the organizational tandards for appearance and behavior.

40.

If a process is executing in its critical section ____________(a) any other process can also execute in its critical section(b) no other process can execute in its critical section(c) one more process can execute in its critical section(d) none of the mentioned

Answer» The correct option is (b) no other process can execute in its critical section

Explanation: None.
41.

What option buyer pays upfront to get the right in option contract?

Answer»

The buyer has to pay Option Premium.

42.

Define Equity Shares?

Answer»

An equity share, commonly referred to as ordinary share, represents the form of fractional ownership in a business venture.

43.

When 2 or more bits in a data unit has been changed during the transmission, the error is called ____________(a) random error(b) burst error(c) inverted error(d) double error

Answer» Right answer is (b) burst error

Explanation: When a single bit error occurs in a data, it is called single bit error. When more than a single bit of data is corrupted or has error, it is called burst error. If a single bit error occurs, the bit can be simply repaired by inverting it, but in case of a burst error, the sender has to send the frame again.
44.

Why is On the Spot research carried out? A)To understand a customer’s psychology and behavior B) To understand a customer’s psychology and capability C) To understand a customer’s behavior and capability D) To understand a customer’s behavior and psychology

Answer»

Correct option: A) To understand a customer’s psychology and behavior

45.

If timestamps of two events are same, then the events are ____________(a) concurrent(b) non-concurrent(c) monotonic(d) non-monotonic

Answer» Right answer is (a) concurrent

For explanation: None.
46.

The value of `sec(2cot^(-1)2+cos^(-1)3/5)` is equal toA. `25/24`B. `-24/7`C. `25/7`D. `-25/7`

Answer» Correct Answer - D
47.

The value of `sum_(r=2)^(oo) tan^(-1)((1)/(r^(2)-5r+7))`, isA. `pi/4`B. `pi/2`C. `(3pi)/(4)`D. `(5pi)/(4)`

Answer» Correct Answer - C
48.

What is point-point link?

Answer»

If the physical links are limited to a pair of nodes it is said to be point-point link.

49.

In distributed systems, a logical clock is associated with ______________(a) each instruction(b) each process(c) each register(d) none of the mentioned

Answer» Right option is (b) each process

The best explanation: None.
50.

Set A consists of 4 distinct and set-B consists of 3 distinct elements. Number of functions that can be defined from a set `A rarr B`which are not onto isA. 35B. 45C. 63D. 9

Answer» Correct Answer - B