Explore topic-wise InterviewSolutions in Current Affairs.

This section includes 7 InterviewSolutions, each offering curated multiple-choice questions to sharpen your Current Affairs knowledge and support exam preparation. Choose a topic below to get started.

1.

Which of the following structures represents neoprene polymer ?

Answer»

Which of the following structures represents neoprene polymer ?



2.

Air contains 20 percent O2 by volume. How many cc of air will be required for oxidation of 100 cc of acetylene.

Answer» Air contains 20 percent O2 by volume. How many cc of air will be required for oxidation of 100 cc of acetylene.
3.

Acetylene when reacts with two molecules of HBr, it gives :

Answer»

Acetylene when reacts with two molecules of HBr, it gives :

4.

During the discharge of a lead storage battery the density of sulphuric acid fell from 1.294 to 1.139g mL−1 . H2SO4 of density 1.294 g mL−1 is 39% and that of density 1.139 g mL−1 is 20% by weight. The battery holds 3.5 L of acid and the volume practically remains constant during the discharge. Calculate the number of Ampere hours for which the battery must have been used. The discharging reactions are:Pb+SO2−4→PbSO4+2e−(anode)PbO2+4H++SO2−4+2e−→PbSO4+2H2O(cathode)

Answer»

During the discharge of a lead storage battery the density of sulphuric acid fell from 1.294 to 1.139g mL1 . H2SO4 of density 1.294 g mL1 is 39% and that of density 1.139 g mL1 is 20% by weight. The battery holds 3.5 L of acid and the volume practically remains constant during the discharge. Calculate the number of Ampere hours for which the battery must have been used. The discharging reactions are:

Pb+SO24PbSO4+2e(anode)

PbO2+4H++SO24+2ePbSO4+2H2O(cathode)

5.

Henrys law constant for CO2 in water is 1.6×108 Pa at 298K. Calculate quantity of CO2 in 500 mL of soda water when packed under 2.5 atm CO2 pressure at 298K.

Answer»

Henrys law constant for CO2 in water is 1.6×108 Pa at 298K.

Calculate quantity of CO2 in 500 mL of soda water when packed under 2.5 atm CO2 pressure at 298K.

6.

The correct order of acid character of the following compounds is:

Answer»

The correct order of acid character of the following compounds is:


7.

why lithium has highest hydration enthalp

Answer» why lithium has highest hydration enthalp
8.

For the elementary reaction A+B→2C the experiment data suggested that Rate(r)=k[A][B]. The molecularity and order of the reaction are respectively:

Answer»

For the elementary reaction A+B2C the experiment data suggested that Rate(r)=k[A][B]. The molecularity and order of the reaction are respectively:

9.

Which of the following has an aldehyde functional group?

Answer»

Which of the following has an aldehyde functional group?

10.

draw the resonating str for c6h5cho compound

Answer» draw the resonating str for c6h5cho compound
11.

A mono-atomic ideal gas undergoes a process in which the ratio of P to V at any instant is constantand equals to 1. What is the molar heat capacity of the gas

Answer» A mono-atomic ideal gas undergoes a process in which the ratio of P to V at any instant is constant
and equals to 1. What is the molar heat capacity of the gas
12.

what can be said about dipole moment of p-dihydroxy benzene in comparison with that of p-dichloro benzene?

Answer» what can be said about dipole moment of p-dihydroxy benzene in comparison with that of p-dichloro benzene?
13.

what will be the concentration of H+ ions if potential of hydrogn electrode is -118.2 mV?(pH2= 1atm)

Answer» what will be the concentration of H+ ions if potential of hydrogn electrode is -118.2 mV?(pH2= 1atm)
14.

calculate molarity of cuprous and sulphate ion when 10 ampere current is passed for 9.65 sec through 400 ml of 0.8 M coppersulphate solution?

Answer» calculate molarity of cuprous and sulphate ion when 10 ampere current is passed for 9.65 sec through 400 ml of 0.8 M coppersulphate solution?
15.

Which of the following dilute solutions have vant hoff factor equal to 4?(Assume complete ionisation)

Answer»

Which of the following dilute solutions have vant hoff factor equal to 4?

(Assume complete ionisation)

16.

difference between sp3and sp2 structures .

Answer» difference between sp3and sp2 structures .
17.

(3) 7.3 to 7.5(4) 3.5 03. Which of the following compounds will underhydrolysis?(1) NaNO2(2) KCI(4) NaCl3) NH,Ci

Answer» (3) 7.3 to 7.5(4) 3.5 03. Which of the following compounds will underhydrolysis?(1) NaNO2(2) KCI(4) NaCl3) NH,Ci
18.

Calculate n-factor of Na3PO4 in the following reaction. \(2 Na_3PO_4\) +\(3 BaCl_2\) → 6NaCl + Ba3(PO4)2

Answer»

Calculate n-factor of Na3PO4 in the following reaction.

\(2 Na_3PO_4\) +\(3 BaCl_2\) 6NaCl + Ba3(PO4)2


19.

Bromoethane reacts with sodium metal to form hydrocarbon. The derivative is?

Answer» Bromoethane reacts with sodium metal to form hydrocarbon. The derivative is?
20.

Ethyl amine undergoes oxidation in the presence of to form [CPMT 1985]

Answer»

Ethyl amine undergoes oxidation in the presence of to form

[CPMT 1985]


21.

pt(nh3)4cl2 ptcl4 isomers number

Answer» pt(nh3)4cl2 ptcl4 isomers number
22.

Which of the following compounds is a peroxide?

Answer»

Which of the following compounds is a peroxide?


23.

The vapour pressure of 2 pure liquids A and B , that form an ideal solution are 100 and 900 torr respectively at temperature T. This liquid solution of A and B is composed of 1 mole of A and 1 mole of B . What will be the pressure , when 1 mole of mixture has been vaporised? (a) 800 torr. (b) 500 torr. (c) 300 torr. (d) 400 torr.

Answer» The vapour pressure of 2 pure liquids A and B , that form an ideal solution are 100 and 900 torr respectively at temperature T. This liquid solution of A and B is composed of 1 mole of A and 1 mole of B . What will be the pressure , when 1 mole of mixture has been vaporised? (a) 800 torr. (b) 500 torr. (c) 300 torr. (d) 400 torr.
24.

33. the enthalpy change for first proton neutralisation of h2s is –37.1 kj mol–1. what is the enthalpy change for first ionisation of h2s

Answer» 33. the enthalpy change for first proton neutralisation of h2s is –37.1 kj mol–1. what is the enthalpy change for first ionisation of h2s
25.

A 2 V battery is connected across the points A and B as shown in the figure given below. Assuming that the resistance of each diode is zero in forward bias and infinity in reverse bias, the current supplied by the battery when one of the diodes has its positive terminal is connected to A (as shown in figure) is

Answer»

A 2 V battery is connected across the points A and B as shown in the figure given below. Assuming that the resistance of each diode is zero in forward bias and infinity in reverse bias, the current supplied by the battery when one of the diodes has its positive terminal is connected to A (as shown in figure) is




26.

Match each set of hybrid orbitals from LIST -I was complex(es given in LIST - II.LIST-ILIST-IIP.dsp21.[FeF6]4−Q.sp32.[Ti(H2O)3Cl3]R.sp3d23.[Cr(NH3)6]3+S.d2sp34.[FeCl4]2−5.Ni(CO)46.[Ni(CN)4]2−

Answer»

Match each set of hybrid orbitals from LIST -I was complex(es given in LIST - II.

LIST-ILIST-IIP.dsp21.[FeF6]4Q.sp32.[Ti(H2O)3Cl3]R.sp3d23.[Cr(NH3)6]3+S.d2sp34.[FeCl4]25.Ni(CO)46.[Ni(CN)4]2


27.

Is it true that under certain conditions, Mg can reduce Al_2O_3 and Al can reduce MgO ? What are those conditions

Answer» Is it true that under certain conditions, Mg can reduce Al_2O_3 and Al can reduce MgO ? What are those conditions
28.

Aniline reacts with excess Br2/H2O to give product identify the major product:

Answer»

Aniline reacts with excess Br2/H2O to give product identify the major product:

29.

The ratio of the mass percentages of 'C and H' and C &O of a saturated acyclic organic compound 'X' are 4:1 and 3:4 respectively. Then, the moles of oxygen gas required for complete combustion of two moles of organic compound 'X' is

Answer» The ratio of the mass percentages of 'C and H' and C &O of a saturated acyclic organic compound 'X' are 4:1 and 3:4 respectively. Then, the moles of oxygen gas required for complete combustion of two moles of organic compound 'X' is


30.

19 Write the reaction and name of product formed when cyclohexanone reacts with semicarbazide

Answer» 19 Write the reaction and name of product formed when cyclohexanone reacts with semicarbazide
31.

The initial rate of hydrolysis of methyl acetate (1M) by a weak acid (HA, 1M) is 1/100th of that of a strong acid (HX, 1M), at 25oC. The Ka of HA is

Answer»

The initial rate of hydrolysis of methyl acetate (1M) by a weak acid (HA, 1M) is 1/100th of that of a strong acid (HX, 1M), at 25oC. The Ka of HA is

32.

On adding a white solid ‘X’ to water, a hissing sound is heard and a lot of heat is produced along with the formation a product ‘Y’.The solution of ‘Y’ is applied on the walls of buildings during whitewashing. It reacts with carbon dioxide in air to form 'Z'. This Z gives a shiny finishing to the walls after 2-3 days of whitewashing.(iv) The chemical formula of product Z is ______.

Answer»

On adding a white solid ‘X’ to water, a hissing sound is heard and a lot of heat is produced along with the formation a product ‘Y’.

The solution of ‘Y’ is applied on the walls of buildings during whitewashing. It reacts with carbon dioxide in air to form 'Z'. This Z gives a shiny finishing to the walls after 2-3 days of whitewashing.



(iv) The chemical formula of product Z is ______.

33.

What is soldner constant proposed by srivasa Ramanujan??

Answer» What is soldner constant proposed by srivasa Ramanujan??
34.

What are rational points on a line?

Answer» What are rational points on a line?
35.

What are the no. Of significant figures if we subtract 1.404 from 1.438 ? Are there only 2

Answer» What are the no. Of significant figures if we subtract 1.404 from 1.438 ? Are there only 2
36.

What is the difference between the two formulas and for what they are used.Ve=√2GM/R and Hmax=RK^2/(1-K^2)

Answer» What is the difference between the two formulas and for what they are used.
Ve=√2GM/R and
Hmax=RK^2/(1-K^2)
37.

is physical adsorption endothermic or exothermic

Answer» is physical adsorption endothermic or exothermic
38.

When (+)-2-butanol is allowed to stand in an aqueous acidic solution for some time, the product will be (a) dextro-rotatory (b) laevo-rotatory (c) optically inactive (d) either of these

Answer» When (+)-2-butanol is allowed to stand in an aqueous acidic solution for some time, the product will be (a) dextro-rotatory (b) laevo-rotatory (c) optically inactive (d) either of these
39.

An element 'X' (At. mass = 40 g mol−1) having FCC structure, has unit cell edge length of 400 pm. Calculate the density of 'X' and the number of unit cells in 4 g of 'X'. (NA=6.022×1023 mol−1)

Answer» An element 'X' (At. mass = 40 g mol1) having FCC structure, has unit cell edge length of 400 pm. Calculate the density of 'X' and the number of unit cells in 4 g of 'X'.

(NA=6.022×1023 mol1)
40.

Question 20.4Write the balanced chemical equation for the following reaction and identify the type of reaction: Ethanol is burnt in air to form carbon dioxide, water and releases heat.

Answer» Question 20.4



Write the balanced chemical equation for the following reaction and identify the type of reaction:



Ethanol is burnt in air to form carbon dioxide, water and releases heat.
41.

Which of the following gas has highest critical temperature:-

Answer» Which of the following gas has highest critical temperature:-
42.

0.2 g of an organic compound was analysed by Kjeldahl’s method. The ammonia evolved was absorbed in 60 ml of N/5 H2SO4. Unused acid required 40 ml of N/10 NaOH for complete neutralization. Find the percentage of nitrogen in the compound.

Answer» 0.2 g of an organic compound was analysed by Kjeldahl’s method. The ammonia evolved was absorbed in 60 ml of N/5 H2SO4. Unused acid required 40 ml of N/10 NaOH for complete neutralization. Find the percentage of nitrogen in the compound.


43.

what are the products formed upon heating (a) S+H_2SO_4(b) CaSO_4 +C(c) H_2SO_4+PC_5(d) Fe_2(SO_4)_3

Answer» what are the products formed upon heating (a) S+H_2SO_4(b) CaSO_4 +C(c) H_2SO_4+PC_5(d) Fe_2(SO_4)_3
44.

Which of the following are benzylic alcohols? (a) C6H5−CH2−CH2OH (b) C6H5−CH2OH (c) C6H5−CH|CH3−OH (d) C6H5−CH2−CH|CH3−OH

Answer»

Which of the following are benzylic alcohols?
(a) C6H5CH2CH2OH
(b) C6H5CH2OH
(c) C6H5CH|CH3OH
(d) C6H5CH2CH|CH3OH

45.

In the DNA of E. Coli the mole ratio of adenine to cytosine is 0.7. If the number of moles of adenine in the DNA is 350000, the number of moles of guanine is equal to : (A) 350000 (B) 500000 (C) 225000 (D) 700000

Answer» In the DNA of E. Coli the mole ratio of adenine to cytosine is 0.7. If the number of moles of adenine in the DNA is 350000, the number of moles of guanine is equal to : (A) 350000 (B) 500000 (C) 225000 (D) 700000
46.

What is shielding or screening effect?

Answer»
  • What is shielding or screening effect?
47.

In the V−T graph of a gas shown below, process P to R represents:

Answer»

In the VT graph of a gas shown below, process P to R represents:




48.

From the above reaction what is the product A?

Answer»
From the above reaction what is the product A?

49.

any example for sorption?

Answer» any example for sorption?
50.

The complex ion that has the minimum wavelength of absorption in the visible region is:

Answer»

The complex ion that has the minimum wavelength of absorption in the visible region is: