Related InterviewSolutions

• Larger foam is produced in bioreactors with increased headspace and small workspace?(a) True(b) FalseThis question was addressed to me in quiz.I'm obligated to ask this question of Role of Shear in Stirred Fermenters in division Fluid Flow and Mixing of Bioprocess Engineering
• “Instrument air compressor” should be used generally as a compressor?(a) True(b) FalseI have been asked this question in my homework.This interesting question is from Role of Shear in Stirred Fermenters topic in chapter Fluid Flow and Mixing of Bioprocess Engineering
• Refer to Q7 and Q8, and determine the agitator speed in appropriate units for power calculation.(a) 3 rps(b) 1 rps(c) 6 rps(d) 4 rpsI got this question in a national level competition.I want to ask this question from Power Requirements for Mixing topic in chapter Fluid Flow and Mixing of Bioprocess Engineering
• Refer to Q7, and determine the agitated batch liquid Reynolds number. (ρB = 64.0 lbs./cu. ft. and μB = 2.12 lb./hr-ft.)(a) 977,035(b) 900,045(c) 877,035(d) 800,045This question was posed to me in an international level competition.I want to ask this question from Power Requirements for Mixing topic in section Fluid Flow and Mixing of Bioprocess Engineering
• The pressure is directly proportional to viscosity?(a) True(b) FalseI had been asked this question by my school teacher while I was bunking the class.Question is taken from Factors Affecting Broth Viscosity in portion Fluid Flow and Mixing of Bioprocess Engineering
• What is the property of an ideal or perfect fluid?(a) Compressible and zero viscosity(b) Compressible and zero density(c) Incompressible and zero viscosity(d) Incompressible and zero densityThis question was addressed to me at a job interview.The origin of the question is Classification of Fluids topic in division Fluid Flow and Mixing of Bioprocess Engineering
• Refer to Q4, and estimate the Agitator impeller diameter D, assuming it to be 33% of tank diameter.(a) 4.62 m(b) 4.50 m(c) 4.60 m(d) 4.52 mThe question was asked in an interview for job.The origin of the question is Power Requirements for Mixing in chapter Fluid Flow and Mixing of Bioprocess Engineering
• Power consumption is less in ungassed fluids.(a) True(b) FalseThis question was addressed to me by my school teacher while I was bunking the class.Asked question is from Power Requirements for Mixing topic in portion Fluid Flow and Mixing of Bioprocess Engineering
• A fluid is flowing between two layers. Calculate the shearing force if the shear velocity is 0.25 m/s and has length 2 m and dynamic viscosity is 2Ns/m^2.(a) 0.2 N/m^2(b) 0.4 N/m^2(c) 0.5 N/m^2(d) 0.6 N/m^2The question was posed to me by my college professor while I was bunking the class.I would like to ask this question from Factors Affecting Broth Viscosity topic in section Fluid Flow and Mixing of Bioprocess Engineering
• Fluid height in the tank is H = 16 m and Diameter of the tank, D = 14 m. Calculate the slurry volume in the tank.(a) 2450 m^3(b) 2463 m^3(c) 3450 m^3(d) 3463 m^3This question was addressed to me during an interview.The query is from Power Requirements for Mixing in division Fluid Flow and Mixing of Bioprocess Engineering