Explore topic-wise InterviewSolutions in .

The Jallianwala Bagh massacre, also known as the Amritsar massacre, took place on 13 April 1919 when troops of the British Indian Army under the command of Colonel Reginald Dyer fired rifles into a crowd of Punjabis, who had gathered in Jallianwala Bagh, Amritsar, Punjab

Massacre of Amritsar, also called Jallianwalla Bagh Massacre, Jallianwalla incident on April 13, 1919 in which British troops fired on a large crowd of unarmed Indians in Amritsar in the Punjab region (now in Punjab state) of India, killing several hundred people and wounding many hundreds more. It marked a turning point in India’s modern history, in that it left a permanent scar on Indo-British relations and was the prelude to Mahatma Gandhi’s full commitment to the cause of Indian nationalism and independence from Britain.

Ans :- TheJallianwala Bagh massacre, also known as the Amritsarmassacre,took placeon 13 April 1919 when troops of the British Indian Army under the command of Colonel Reginald Dyer fired rifles into a crowd of Indians, who hadgathered inJallianwala Bagh, Amritsar, Punjab.

TheJallianwala Bagh Massacrewas the deadliest and brutalincidentever happened in the history of India. In 1919, the pre-independent India was slowly emerging with the help of Mahatma Gandhi. ... This lead to anger among the people across India. The Rowlatt Act was also implemented at that time.

please Hindi

b)Simon Commission was constituted under the leadership of Sir John Simon to look into the functioning of the constitutional system in India and suggest changes. It was officially known as ‘Indian Statutory Commission’ and consists of four conservative, two Labourites and one liberal member from the British Parliament.

The British government appointed a commission to enquire into the working of the government of India act of 1919 and to suggest further reforms in the system of administration. This commission is known as the Simon commission, after Sir John Simon who headed it. Its appointment came as a rude shock to the Indian people. The members of the commission were all Englishmen and not a single Indian was included in it. The government showed no inclination of accepting the demand for Swaraj. The composition of the commission confirmed the fears of the Indian people. The appointment of the commission sparked off a wave of protest all over the country.

In 1927, the annual session of the congress was held at Madras. It decided to Boycott the commission. The Muslim league also decided to boycott the commission. The commission arrived in India on 3 February 1928. On that day, the entire country observed a hartal. In the afternoon on that day, meeting were held all over the country to condemn the appointment of the commission and to declare that the people of India would have nothing to do with it. There was firing at demonstrators in Madras and lathi charges at many places. The commission faced massive protest demonstrations and hartals wherever it went. The central legislative assembly decided by a majority that it would have nothing to do with the commission. All over the country the cry of ‘Simon Go Back’ was raised.

The police resorted to repressive measures. Thousands of people were beaten up. It was during these demonstrations that the great leader Lala Lajpat Rai, who was popularly known as Sher-i-Punjab, was severely assaulted by the police. He died of the injuries inflicted on him by the police. In Lucknow, Nehru and Govind Ballabh Pant were those who suffered blows of police lathis. The lathis blows crippled Govind Ballabh Pant for life.

In the agitation against the Simon commission, the Indian people once again showed their unity and determination for freedom. They now prepared themselves for a bigger struggle. The congress session at Madras, which was presided over by Dr M.A.Ansari, had passed a resolution which declared the attainment of complete independence as the goal of the Indian people. The resolution was moved by the Nehru and supported by S. satyamurty. Meanwhile an organisation called the Indian Independence league had been formed to press the demand for complete independence. The league was led by a number of important leaders like Jawaharlal Nehru, Subhas Chandra Bose, Srinivas Iyenger, Satyamurty and Sarat Chandra Bose, elder brother of Subhas Chandra Bose.

In December 1928, the congress met at Calcutta under the presidentship ofMotilal Nehru.At this session,Jawaharlal Nehru, Subhas Chandra Boseand many others pressed the congress to demand complete independence. The congress, however, passed a resolution demanding dominion status. This meant less than complete independence. But it was declared that if the dominion status was not granted within one year, the congress would demand complete independence and would launch a mass movement to achieve it. The Indian independence league continued to rally the people behind the demand for complete independence throughout 1929. The mood of the people throughout the country had changed by the time the congress held its next annual session.

a)Jallianwala Baghis situated in Amritsar (Punjab). Here, as a mark of protest against the Rowlatt Act, a peacefully assembly was going on. People from many surrounding villages were participating. Thisgarden is enclosed on three sides and has only one entrance. In order to terrorize the people, General Dyer entered the park with troops. Without giving any warning to the people, he ordered his sepoys to fire at them. In this firing many people were killed and many wounded

DPT(alsoDTPandDTwP) is a class of combinationvaccinesagainst threeinfectious diseasesin humans:diphtheria,pertussis(whooping cough), andtetanus. The vaccine components include diphtheria and tetanustoxoidsand killed whole cells of thebacteriumthat causes pertussis (wP).

Most of thisair pollutionwe cause results from the burning of fossil fuels, such as coal,oil, natural gas, and gasoline to produce electricity and power our vehicles. Carbon dioxide (CO2) is a good indicator of how much fossil fuel is burned and how much of other pollutants are emitted as a result.

another answer

Humans are the maincauseof waterpollution, which is triggered in many ways: by the dumping of industrial waste; due to temperature rise, thatcausethe alteration of water by reducing the oxygen in its composition; Or due to deforestation, whichcauses sediments and bacteria to appear under the soil

With anIQof 120 to 140, itmeansyou have very superior intelligence and your intelligence is better than most.

The answer is option D

The returning officer is the County Sheriff or the County Registrar for the county and is the person responsible for organising the poll, printing the ballot papers and counting the votes in each constituency.

The returning officer provides polling stations - usually schools and public buildings are used.

Each candidate at a general election may be represented by a "personation agent" at the polling station. The personation agent supervises the polling and helps prevent electoral offences.

If you are on the Register of Electors, a polling card will be sent to your home before the date of the general election. Your polling card will include your elector number and will tell you where you can vote.

When you arrive at the polling station, you will be asked to state your name and address and you may be asked to prove your identity. If you are asked to prove your identity and you cannot do so, you may not be allowed to vote. If the presiding officer is satisfied in relation to your identity, your ballot paper will be stamped and handed to you.

You will then go into a voting compartment. The names of the candidates in the election appear in alphabetical order on the ballot paper along with an indication of their political party, if any. A photograph of the candidate and/or a party emblem may also appear on the ballot paper.

You must indicate the order of your choice of candidates by writing 1 in the box beside the photograph of your first choice of candidate and, if you wish, write 2 beside the photograph of your second choice of candidate, 3 beside the photograph of your third choice and so on.

When you vote this way, you are instructing the returning officer to transfer your vote to your second choice candidate if the first choice is either elected or eliminated. If your second choice candidate is either elected or eliminated, your vote will be transferred to your third choice and so on. This is known as a single transferable vote.

You must then fold your ballot paper to hide your vote and place it in the sealed ballot box. You may only vote once at the election.

There are a number of procedures in place to allow people with disabilities to vote.

An example fromart theoryisaesthetic theoryas a set of principles underlying the work of a particularartistorartisticmovement: such as the Cubistaesthetic. ... The term "aesthetics" was appropriated and coined with newmeaningin the German formEsthetic(modern spellingAesthetic) by Alexander Baumgartenin 1735.

TheWhiskey Rebellion(also known as theWhiskey Insurrection) was atax protestin the United States beginning in 1791 and ending in 1794 during thepresidency of George Washington, ultimately under the command of American Revolutionary war veteran Major James McFarlane. The so-called "whiskey tax" was the first tax imposed on a domestic product by the newly formed federal government. It became law in 1791, and was intended to generate revenue for the war debt incurred during the Revolutionary War. The tax applied to all distilled spirits, butAmerican whiskeywas by far the country's most popular distilled beverage in the 18th century, so the excise became widely known as a "whiskey tax".

People can oppose the unjust laws by:-

1.by protesting against it.2.assossiations can be formed which can raise the issue of unjust law3.can demand for its repeal.4. can be highlighted thrugh mass media

1. true2. false3. true4. false5. true

Prosperity in theGupta Empireinitiated a period known as the Golden Age ofIndia, marked by extensive inventions and discoveries in science, technology, engineering, art, dialectic, literature, logic, mathematics, astronomy, religion, and philosophy.

.In thisperiodthere was political stability in India. Prosperity in theGupta Empireinitiated aperiod knownas theGolden Age of India, marked by extensive inventions and discoveries in science, technology, engineering, art, dialectic, literature, logic, mathematics, astronomy, religion, and philosophy.

I want long answer

Simply put, the inequalities between men and women hurt development and prosperity. Providing equal opportunities for women lets them use their talents in the workforce and make better choices for themselves and their families and communities.One reason women have fewer opportunities is families may decide they can’t afford to send all their children to school so they send their sons, assuming that the daughter’s earning potential is less.[1]The daughters therefore receive less schooling which makes them less likely to be employed or start a business and even if they do, they will likely be paid less than a man would.[2]Empowering women with legal and political protection allows them to have their voices heard in larger decisions affecting their communities. There is evidence that when women have the right to vote, spending on child welfare and public health increases. For example, in the US, within one year of women getting the right to vote, public health spending increased by 35% leading to decrease in childhood diseases and childhood mortality going down by 8–15%.

Judiciary upholds the spirit of constitution and regards it as the primary responsibility of the government too.Spirit of constitution would mean, the ideals like equality, fair governance, equal distribution of wealth, ensuring peace and harmony etc

b) racial discrimination, Apartheid was a political system in South Africa in which people were divided into racial groups and kept apart by law

The following steps are taken to control the soil erosion in hilly areas : (i) Contour ploughing : which refers to ploughing along contour lines. (ii) Terrace farming :constructionof steps along the hilly areas by cutting the rock layers to reduce the flow of rivers.

The Dīn-i Ilāhī was a syncretic religion propounded by theMughal emperor Akbar the Greatin 1582 AD, intending to merge the best elements of the religions of his empire, and thereby reconcile the differences that divided his subjects.

The democracy is important for the proper functioning of the country

The Democracy is important for proper functioning of a country.

The democracy is important for the proper functioning of the country

The importance of voting and democracy dates back to the time of ancient Greece. The ancient Romans also utilized democracy which set a precedent for future nations. For example, the United States government today closely resembles the Roman government. Voting and democracy is very important in a nation because it provides people an opportunity to voice their opinion and vote for what they believe in, it holds elected officials accountable for their behavior while in office, and it prevents a minority from dictating the policies of a majority. History, as well as the US government today, proves the importance of voting and democracy.

Voting and democracy in a nation allows people to participate in their government. People have the opportunity to vote for what they believe in. In Greece, the Athenian government was run by a direct democracy. Citizens voted directly for proposed bills and certain decisions. Their voting system was different from what we have today in the USA, but was still effective in allowing citizens to have a say. Voting was also used in Roman times and is used today as well. In order for voting to be successful, the citizens of the nation must be educated. If voters are educated on the policies they are voting for, they will understand the possible outcomes of various policies and therefore will make better decisions. For example, the Athenians voted for things like whether or not they should go to war and where a new building should be built. Because boys were educated at a young age in Athens, they were capable of making informed decisions regarding such topics. Athens’ educated population and strong democracy led them to become a powerful nation.

Voting and democracy also holds representatives accountable for the decisions they make while in office. Most representatives in Rome and all representatives in the USA, for example, did/do not serve for life terms. Instead, they serve for a certain amount of time depending on their position. Therefore, if a representative wants to run for another term, he/she must act in the best interest of the people in order to have their support in a future election. If the citizens are pleased with what the representative has to offer, they will reelect him/her. On the other hand, if a representative, such as the president, does not satisfy the needs of the people, the people will not vote for him/her for a second term. In addition, in the USA, if the president commits “treason, bribery, or other high crimes,” according to the Constitution, an impeachment process may occur. If the impeachment is carried out, the president would be removed from office. The impeachment process today is similar to the Athens’ ostracism. Ostracism was a process of banning a leader from Athens for ten years if he/she was seen as a threat of becoming a tyrant. This set the model for the US impeachment process. The US also learned from the problems that were caused by some Roman representatives that served life terms and recognized that defined terms for elected representatives were more appropriate. For these reasons, elected officials must be sure to act in the best interest of the people, otherwise they could be removed from their position. This benefits the nation as a whole.

The final reason as to why voting and democracy are important is because it prevents a minority from dictating the policies of a majority. As Pericles once said, in a democracy “power is in the hands, not of a minority, but the whole people”. The US government is set up so it acts in a manner that benefits the majority of the nation. At the same time, the US has the Bill of Rights. The Bill of Rights is similar to Rome’s Twelve Tables. Both the Bill of Rights and the Twelve Tables were/are used to provide political and social rights to all citizens, even the minorities. By doing so, the government cannot violate the political and social rights of the people, no matter what social class they may fall in. In addition, both the US and Rome have/had a bicameral legislative branch and an executive branch. However, one of the major differences between the two is that Rome’s federal judicial branch was only on a local level, where the judicial branch in the US has both local and federal branches. The judicial branch also protects the rights of citizens. Without voting and democracy, policies that represent only a small portion of the citizens could rule our nation. The policies would not represent the opinions and objectives of the majority.

In conclusion, voting and democracy is crucial in a government because it allows people to participate in their government, holds elected representatives responsible for their decisions, and it prevents a minority from dictating the policies of a majority. As Abraham Lincoln once said, democracy is "government of, by, and for the people". This means that the citizens of a nation have the chance to run and be apart of what controls their nation. If the entire nation participates in the government, the nation will thrive.

democracy is important because it help to govern the government

Weldingis a process of joining two metal pieces by the application of heat.Weldingis the least expensive process and widely used now a days in fabrication.Weldingjoints different metals with the help of a number of processes in which heat is supplied either electrically or by mean of a gas torch.

Weldingis the process of joining together two pieces of metal so that bonding takes place at their original boundary surfaces”. When two parts to be joined are melted together, heat or pressure or both is applied and with or without added metal for formation of metallic bond.

Weldingis afabricationorsculpturalprocessthat joins materials, usuallymetalsorthermoplastics, by using highheatto melt the parts together and allowing them to cool causingfusion. Welding is distinct from lower temperature metal-joining techniques such asbrazingandsoldering, which do notmeltthe base metal.

In addition to melting the base metal, a filler material is typically added to the joint to form a pool of molten material (theweld pool) that cools to form a joint that, based on weld configuration (butt, full penetration, fillet, etc.), can be stronger than the base material (parent metal).Pressuremay also be used in conjunction with heat, or by itself, to produce a weld. Welding also requires a form of shield to protect the filler metals or melted metals from being contaminated oroxidized.

Many differentenergy sourcescan be used for welding, including a gasflame(chemical), anelectric arc(electrical), alaser, anelectron beam,friction, andultrasound. While often an industrial process, welding may be performed in many different environments, including in open air,under water, and inouter space. Welding is a hazardous undertaking and precautions are required to avoidburns,electric shock, vision damage, inhalation of poisonous gases and fumes, and exposure tointense ultraviolet radiation.

Until the end of the 19th century, the only welding process wasforge welding, whichblacksmithshad used for millennia to join iron and steel by heating and hammering.Arc weldingandoxy-fuel weldingwere among the first processes to develop late in the century, and electric resistance welding followed soon after. Welding technology advanced quickly during the early 20th century as the world wars drove the demand for reliable and inexpensive joining methods. Following the wars, several modern welding techniques were developed, including manual methods likeshielded metal arc welding, now one of the most popular welding methods, as well as semi-automatic and automatic processes such asgas metal arc welding,submerged arc welding,flux-cored arc weldingandelectroslag welding. Developments continued with the invention oflaser beam welding,electron beam welding,magnetic pulse welding, andfriction stir weldingin the latter half of the century. Today, the science continues to advance.Robot weldingis commonplace in industrial settings, and researchers continue to develop new welding methods and gain greater understanding of weld quality.

balding is the process of joining of two irons or two different metal...

Weldingis afabricationorsculpturalprocessthat joins materials, usuallymetalsorthermoplastics, by using highheatto melt the parts together and allowing them to cool causingfusion. Welding is distinct from lower temperature metal-joining techniques such asbrazingandsoldering, which do notmeltthe base metal.

In addition to melting the base metal, a filler material is typically added to the joint to form a pool of molten material (theweld pool) that cools to form a joint that, based on weld configuration (butt, full penetration, fillet, etc.), can be stronger than the base material (parent metal).Pressuremay also be used in conjunction with heat, or by itself, to produce a weld. Welding also requires a form of shield to protect the filler metals or melted metals from being contaminated oroxidized.

Many differentenergy sourcescan be used for welding, including a gasflame(chemical), anelectric arc(electrical), alaser, anelectron beam,friction, andultrasound. While often an industrial process, welding may be performed in many different environments, including in open air,under water, and inouter space. Welding is a hazardous undertaking and precautions are required to avoidburns,electric shock, vision damage, inhalation of poisonous gases and fumes, and exposure tointense ultraviolet radiation.

Until the end of the 19th century, the only welding process wasforge welding, whichblacksmithshad used for millennia to join iron and steel by heating and hammering.Arc weldingandoxy-fuel weldingwere among the first processes to develop late in the century, and electric resistance welding followed soon after. Welding technology advanced quickly during the early 20th century as the world wars drove the demand for reliable and inexpensive joining methods. Following the wars, several modern welding techniques were developed, including manual methods likeshielded metal arc welding, now one of the most popular welding methods, as well as semi-automatic and automatic processes such asgas metal arc welding,submerged arc welding,flux-cored arc weldingandelectroslag welding. Developments continued with the invention oflaser beam welding,electron beam welding,magnetic pulse welding, andfriction stir weldingin the latter half of the century. Today, the science continues to advance.Robot weldingis commonplace in industrial settings, and researchers continue to develop new welding methods and gain greater understanding of weld quality.

welding is a fabrication or sculptural process that joins materials usually metals or thermoplastic by using high heat to melt the parts together and and allowing them to cool causing fusion.

it was sufficient

Consumer exploitation refers to the act of taking advantage of buyers. This occurs because of limited information about the product, such as guarantees and terms of purchase. Illiterate consumers are especially vulnerable; consequently, they are likely to be cheated into paying more and even purchasing a counterfeit product. When few manufacturers produce an item, competition is limited, leading producers to determine the price and availability of the product and thereby exploiting the buyer. Limited supplies of a product lead to hoarding and a subsequent boost in prices.

Ans :- The very largest unicellular Eukaryotes are just about visible with the naked eye, while the smallest, the prokaryotic bacteria, often need something like an electron microscope to make them visible. The majority of the Eukaryotic algae, protoctists and fungi can be seen using a compound microscope.

1)Lack of awareness among the people about their rights and duties.

2) Consumer forums are not so strong in India.

3) The consumer redressal process is time consuming and expensive.

Consumer Protection Act 1986, a major step taken in 1986 by the Indian government was the enactment of the Consumer Protection Act, popularly known as COPRA.

(i) It applies to all goods and services.

(ii) It covers all sectors, i.e., private, public and cooperative.

(iii) It gives rights to consumers. Established consumer protection councils at centre and state levels. Under COPRA, a three-tier quasi-judicial machinery at district, state and national level was Set-up for redressal of consumer disputes. The Act has enabled the consumers to have the right to represent in the consumer courts. The enactment of COPRA has led to the setting up of separate departments of consumer affairs in central and state governments.

Consumer Protection Council is organisation where consumer can plan their actions against exploitation. Consumer Protection Council has no legal rights and it is a voluntary organisation.

On the other hand consumer courts are those places where the consumer can lodge their Complaints against exploitation. These consumer courts are three tier Quasi judicial machinery set up for redressal of consumer disputes.

Need and importance of consumer awareness

It has been observed very often that a consumer does not get right goods and services. He is charged a very high price or adulterated or low quality goods are sold to him. Therefore it is necessary to make him aware. Following facts classify the need of making consumers aware:1. To achieve maximum satisfaction: The income of every individual is limited. He wants to buy maximum goods and services with his income. He gets full satisfaction only by this limited adjustment. Therefore it is necessary that he should get the goods which are measured appropriately and he should not be cheated in any way. For this he should be made aware.2. Protection against exploitation: Producers and sellers exploit the consumers in many ways asunderweighting, taking more price than the market price, selling duplicate goodsetc. Big companies through their advertisement also mislead the consumers. Consumer awareness shields them from the exploitation by producers and sellers.3.Control over consumption of harmful goods: There are several such goods available in market which cause harm to some consumers. For example we can take goods like cigarette, tobacco, liquor etc. The consumer education and awareness motivate people not to purchase such goods which are very harmful for them.4. Motivation for saving: The awareness controls people from wastage of money and extravagancy and inspire them to take right decision. Such consumers are not attracted by sale, concession, free gifts, attractive packing etc due to which people can use their income in a right way and can save money.5. Knowledge regarding solution of problems: The consumers are cheated due to illiteracy, innocence and lack of information. Therefore it becomes necessary that the information about their rights should be provided to them so that they cannot be cheated by producers and sellers. Through consumer awareness they are also made known to the proceedings of laws so that they can solve their problems.6. Construction of healthy society: Every member of the society is a consumer. So, if the consumer is aware and rationale, then complete society becomes healthy and alert towards their rights.

your welcome.

1) issue price

2) PDS

3) Ration shop

stupa shikhara mandap

the

Assam has always contributed in different manners to the socio-cultural and political life of the Indian nation, but all these contributions have most often remained unobserved, unnoticed by the national intelligentsia. It is the same with the freedom movement also. Assam had her due share in the freedom movement, where the country fought to a man in order to oust the two-century old British rule from the country. In fact Assam acted as the prime mover in some respect. One such important episode in the annals of freedom movement, where Assam acted as the prime mover, was the uprising in the Phulaguri area of middle Assam in October 1861 AD. It was the first ever peasant movement in the context of Indian freedom movement, which took place much before the Champaran movement took place under the leadership of Mahatma Gandhi. The Bengal farmers had revolted in the previous year, that is 1860 AD. But their ire was against the indigo planters, not against the British administration. So the Phulaguri uprising was a historic event. It was also the first ever non-cooperation movement of Indian freedom movement because the farmers of Phulaguri region had stopped payment of taxes to the British administration and thus openly defied the rulers. This had not happened anywhere in India before Phulaguri.

The immediate cause of the Phulaguri uprising of 1861 AD was the exorbitant taxes imposed by the British administration on the farmers of Assam. The British administration always acted in the interests of the British tea planters, not the common masses. These tea planters had been suffering from dearth of labourers. They had to bring labourers from other states at high costs. Moreover a large number of such labourers died of unhygienic conditions in the tea estates as malaria was rampant in those areas. So the tea planters thought that it would be better to engage the local people as labourers in their estates. But the indigenous Assamese people were always independent minded. Even the erstwhile Ahom kings could not uproot a farmer from the latter’s homestead as the right of the farmer on his land was considered to be supreme.

The revolt, known as 'Phulaguri dhawa', in which a British official was killed and several police officers were injured, was triggered by a ban imposed on opium cultivation and a proposed taxation on betel leaf and nut.

The British crushed the rebellion, but the incident shook the foundation of the British rule in the region all the same, a resident of Phulagari and president of a committee, formed to commemorate the 150 years of the revolt, Hari Kanta Das said.

The revolt, known as 'Phulaguri dhawa', in which a British official was killed and several police officers were injured, was triggered by a ban imposed on opium cultivation and a proposed taxation on betel leaf and nut.

20-May-2018 · 2 answers

The revolt, known as 'Phulaguri dhawa', in which a British official was killed and several police officers were injured, was triggered by a ban imposed on opium cultivation and a proposed taxation on betel leaf and nut. Setup Timeout Error: Setup took longer than 30 seconds to complete.

b) Buffer stock is the stock of food grains produce by the government through food corporation of india (FCI) it is created in order to distribute food grains in deficit area or poorer section of society at an affordable price it helps to resolve problem of shortage of food during adverse weather conditions

Power sharing is the very spirit of democracy. A democratic rule involves sharing power with those affected by its exercise, and who have to live with its effects. All communities, social groups get their say in the governance. People have a right to be consulted on how they are to be governed. A legitimate government is one where citizens acquire a stake in the system; through participation.Need of Power SharingPower sharing helps in reducing the conflict between various social groups. Hence, power sharing is necessary for maintaining social harmony and peace.Power sharing helps in avoiding the tyranny of the majority. The tyranny of the majority not only destroys the minority social groups but also the majority social group.People’s voice forms the basis of a democratic government. Hence, power sharing is essential to respect the spirit of democracy.Avoiding conflict in society and preventing majority tyranny are considered as prudential reasons for power sharing. Maintaining the spirit of democracy is considered as the moral reason for power sharing.

a is incorrect and rest all are correct

option A is wrong because deoxygenated blood is drained into the right atrium from that it pass through right ventricle

बेंजामिन सैमुअल ब्लूम एक अमेरिकी शैक्षिक मनोवैज्ञानिक थे, जिन्होंने शैक्षिक उद्देश्यों के वर्गीकरण और महारत सीखने के सिद्धांत में योगदान दिया

A small business is an independently owned and operated company that is limited in size and in revenue depending on the industry.

the definition of small business is an independently owned & operated company that is limited in size & in revenue depending on the industry

The function of the skeleton is as follows:

1.Support:It supports ligaments, tendons and organs in doing their jobs, and ensures all of those structures don’t fall apart

2.Protection:It protects internal organs

3.Movement:If it weren’t for bones, muscles wouldn’t be able to move anything, as it’s bones they tug on in order to move our bodies around!

4.Breathing:This is a very underestimated function of the skeleton. The ribs, clavicles and sternum move alongside the lungs and helps the lungs expand and contract

5.Production of red blood cells:The bone marrow of large bones create red blood cells to be put into the circulation

6.Storage of minerals:Bones store minerals like calcium and hydroxylapatite

7.Endocrine regulation:Calcium homeostasis/regulation is largely dependent on bones as they serve as a reservoir for calcium. And when blood calcium levels are low, parathyroid hormone is released from the parathyroid gland which causes calcium to move from bones to blood. This is a simplification of calcium homeostasis but is good enough!

it provides balance, support, protection, and movement of a body

It provide support our body to move,walk and another activity.

The human skeleton performs six major functions; support,movement,protection,productionof blood cells,storageofminerals, andendocrine regulation.

1)supports ligament,tendons2)protect internal organs3)movement of bones4)breathing5)production of rbc6)storage of minerals7)endocrine regulation

it gives shape and rigidity to our body

Bhoja(reigned c. 1010–1055 CE) was an Indian king from theParamara dynasty. His kingdom was centered around theMalwaregion in central India, where his capitalDhara-nagara(modern Dhar) was located. Bhojafought warswith nearly all his neighbours in attempts to extend his kingdom, with varying degrees of success. At its zenith, his kingdom extended fromChittorin the north to upperKonkanin the south, and from theSabarmati Riverin the west toVidishain the east.Bhoja is best known as a patron of arts, literature, and sciencesI think it's help U

Bhoja(reigned c. 1010–1055 CE) was an Indian king from theParamara dynasty. His kingdom was centered around theMalwaregion in central India, where his capitalDhara-nagara(modern Dhar) was located. Bhojafought warswith nearly all his neighbours in attempts to extend his kingdom, with varying degrees of success. At its zenith, his kingdom extended fromChittorin the north to upperKonkanin the south, and from theSabarmati Riverin the west toVidishain the east.

Bhoja is best known as a patron of arts, literature, and sciencesI think it's help U :-))

Read more on Brainly.in - https://brainly.in/question/4750079#readmore

king of paramara dynasty his centered

raja is a good boy .he has a cute brother bhoja

Raja Bhoja was a king of Paramara dynasty. He fought wars with almost his all neighbours in order to extend his empire

Bhoja is best known as a patron of arts, literature, and sciences. The establishment of theBhoj Shala, a centre forSanskritstudies, is attributed to him. He was apolymath, and several books covering a wide range of topics are attributed to him. He is also said to have constructed a large number ofShivatemples, althoughBhojeshwar TempleinBhojpur(a city founded by him) is the only surviving temple that can be ascribed to him with certainty.

The adulthuman skeletal system consists of 206 bones, as well as a network of tendons, ligaments and cartilage that connects them. The skeletal systemperforms vital functions — support, movement, protection, blood cell production, calcium storage and endocrine regulation — that enable us to survive