Explore topic-wise InterviewSolutions in .

when the BODY is RELEASED from a HEIGHT of 2 meters then all the potential energy will be converted to KINETIC energy.assuming base as a referencemgh+0=K.E.+0so K.E.=400JExplanation:please mark me as BRAINLIEST

uuxucccicfiffofofid8r8fof9fot9t

Here the LIQUID EXERTS gravititional FORCE

The factors on which the turning EFFECT of force or torque ACTS are: - The magnitude of the applied force. - The distance of the line of ACTION of force from the POINT of ROTATION of that body.Explanation:

the OPTIMUM SPEED of the car to avoid wear and TEAR On its TYRE is then . Take tan 150=0.

temperatureExplanation:PLS GIVE me some DROP of THANKS pls ❤️

AbstractSample preparation method is crucial in analytical chemistry and especially for the complicated matrices encountered in biological and environmental samples. The challenge in sample preparation in such analysis is the recovery of analytes in an isolate suitable for DETERMINATION at high sensitivity and specificity. Solid phase analytical derivatization (SPAD) combines ATTRACTIVE features of both solid phase extraction and analytical derivatization. As such it PROVIDES increase in sensitivity, specificity of detection for selected functional groups, low organic solvent consumption, ease of automation, high throughput and better separation in chromatography. In SPAD analytes are extracted onto a solid phase and derivatized in one single step. Over the years many SPAD based METHODS have been reported in LITERATURE using various combinations of solid phases, analytical derivatization reagents and detectors.

moment of FORCE is negative if it tends to rotate the body clockwiseExplanation:hope it HELPS YOUHAVE a nice DAY ahead ✌✌

Measurement is a COMPARISON of an UNKNOWN quantity with a known FIXED quantity of the same kind.

ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm. What is S2?

tion:MEASUREMENT MEANS the comparison of an UNKNOWN quantity with some known quantity. This known fixed quantity is CALLED a UNIT.

Total cost of using bulb = 9 Rs Explanation :Given :֎ Rating of electric bulb = 200 W - 220 V ֎ Power of electric bulb P = 200 W֎ Time for which bulb is daily used, t = 6 hrs֎ Number of DAYS for which bulb is used = 15 days֎ Rate of cost PER kWh energy = 50 PaiseTo find :Cost of using the bulb Formula will be used :֎ E = P× tHere, E is the electrical energy in Watt - hour unit ,P is the Power in Watt unitand t is the time in hours Solution :By using formula →Again, we know that, → 1 kWh = 1000 Wh therefore, Calculating total energy CONSUMED by bulb in 15 days Total Energy consumed = 15 × 1.2 KWh So , total energy consumed = 18 KWhNow, Calculating Cost of using bulb at 50 paise per KWh ⇨ Total cost of using bulb = 50× 18 paise = 900 PaiseConverting into Rupees, Total cost of using bulb = 900/100 Rs = 9 Rs

tion:do do dl in touch ckgvjdghg GO kick G y 40k you have FAILED and never quit but it may take longer and more likely be near a good RATE and then you are going out with them and then I have failed and never quit my kaa for that that is because that we are going out with a LOT and a few of our

The Coulomb constant, the electric force constant, or the electrostatic constant (denoted KE, K or K) is a proportionality constant in electrostatics equations. In SI units it is EQUAL to 8.9875517923(14)×109 kg⋅m3⋅s−2⋅C−2.I hope it's HELPFUL to youplease mark me as BRANLIEST

Purely rotational motion occurs if every PARTICLE in the body moves in a circle about a SINGLE line. This line is CALLED the axis of rotation. Then the radius vectors from the axis to all particles UNDERGO the same angular displacement at the same TIME. The axis of rotation need not go through the body.

ahjajajajjanauajajshshahhah

There are three measurable properties of WAVE motion: amplitude, WAVELENGTH, and frequency. A definitive EXPERIMENT was YOUNG's double slit experiment, which demonstrated that light shined at two slits in a screen show an interference PATTERN characteristic of waves of light, rather than particlesExplanation:Mark me brainlieist please

A gas contained in a cylinder fitted with a frictionless piston expands against a CONSTANT EXTERNAL PRESSURE of 1 atm from a volume of 5 liters to a volume of 10 liters find work DONE by the gas in this process [1 atm =1.013x10⁵ Pa]

Strategy The PAN and the water are always at the same temperature. When you put the pan on the stove, the temperature of the water and the pan is increased by the same amount. We use the equation for the heat transfer for the given temperature change and mass of water and aluminum. The specific heat values for water and aluminum are given in Table 1. Solution Because water is in thermal contact with the aluminum, the pan and the water are at the same temperature. CALCULATE the temperature difference: ΔT = Tf − Ti = 60.0ºC. Calculate the mass of water. Because the density of water is 1000 kg/m3, one liter of water has a mass of 1 kg, and the mass of 0.250 liters of water is mw = 0.250 kg. Calculate the heat transferred to the water. Use the specific heat of water in Table 1: Qw = mwcwΔT = (0.250 kg)(4186 J/kgºC)(60.0ºC) = 62.8 kJ. Calculate the heat transferred to the aluminum. Use the specific heat for aluminum in Table 1: QAl = mAlcAlΔT = (0.500 kg)(900 J/kgºC)(60.0ºC) = 27.0 × 104 J = 27.0 kJ.< Compare the percentage of heat going into the pan versus that going into the water. FIRST, find the total transferred heat: QTotal = Qw + QAl = 62.8 kJ + 27.0 kJ = 89.8 kJ. THUS, the amount of heat going into HEATING the pan is 27.0 kJ 89.8 kJ × 100 % = 30.1 % and the amount going into heating the water is 62.8 kJ 89.8 kJ × 100 % = 69.9 % Explanation:

9.17Explanation:t=D/V when D 7150. v 780

tion:Light-year, in astronomy, the DISTANCE traveled by light moving in a vacuum in the course of ONE year, at its accepted velocity of 299,792,458 metres per SECOND (186,282 miles per second). A light-year EQUALS about 9.46073 × 1012 km (5.87863 × 1012 miles), or 63,241 astronomical units.

सीजीपीएम ने 1 9 48 में तीन नई इकाइयों (अन्य लोगों के बीच) जोड़ा: बल की एक इकाई (न्यूटन), जिसे उस बल के रूप में परिभाषित किया गया है जो एक किलोग्राम के द्रव्यमान को प्रति सेकंड एक मीटर प्रति सेकंड का त्वरण देता है; ऊर्जा की एक इकाई (जूल), काम के रूप में परिभाषित किया जब एक न्यूटन के आवेदन के बिंदु में एक मीटर विस्थापित किया जाता है .

Principal axis: The line joining the centre of curvature and the optical centre is called the principal axis. Aperture: This is the length or breadth of the LENS through which REFRACTION takes place. Principal FOCUS: A LIGHT ray parallel to the principal axis of the lens meets at a POINT on the principal axis.

Given parametersInitial velocity (u) = 0Final velocity (v) = 40 km/hv = 40 × (5/18)v = 11.1111 m/sTime (t) = 10 minutet = 60 x 10T = 600 sAcceleration (a) =?Consider the FORMULAV = u + at11.11 = 0 + a × 60011,11 = 600 aa = 11.11/600a = 0.0185 ms-2

Procedure:Perform this EXPERIMENT on a dry DAY! ...Use the scissors to cut a two-inch long piece of STRAW.Have an ADULT PUNCH a hole through the center of the jar lid or piece of plastic big enough to fit the straw through.Insert the straw into the hole for your lid. ...Cut a 10-inch piece of copper wire.

tion:1. Identify whether a GIVEN SUBSTANCE is ACIDIC from the following reactions 2 - + 2504; 2H^ 2 50:; angle NAOH; L/4; Nh + OH

The CURRENT CARRYING circular loop behaves as a magnetic dipole of magnetic moment M acting perpendicular to its plane. The TORQUE on the current loop of magnetic dipole moment M in the magnetic field B isτ=MBsinα=IA×Bsinα,(∵M=AI)where α is the angle between M and B . The system will be in stable equilibrium if torque is zero, which is so if α=0 ∘ . This is possible if B is PARALLEL to A i.e. B is perpendicular to the plane of the loop. In this orientation, the magnetic field produced by the loop is in the same direction as that of EXTERNAL field, both normal to the plane of loop. It is due to this fact, the magnetic flux due to total field is maximum.

No, we cannot HEAR each other on the moon's SURFACE because sound REQUIRES MEDIUM for transmission. It cannot travel through vacuum. ... It's not going to be possible because it is is a vacuum because therefore sound cannot sound cannot travel through travel through a vacuum travel through vacuum.

We KNOW,PERIMETER of RECTANGLE =2(l+b)=2(100+80) =360

so BLEH. is bleh. am bleh. the bleh. THEE bleh

The main function of BMS is to ensure that the battery is protected and any OPERATION out of its safety limit is prevented. It monitors the battery pack's state of CHARGE (SOC) along with the state of HEALTH. ... Lithium-ion batteries that possess high charge density, power most electric cars.Explanation:mark me as BRAIN list

Seal the Li-ion battery in an AIRTIGHT bag and put it in the freezer for about 24 HOURS, ENSURING there is no moisture in the bag that could get the battery WET. When you take it out of the freezer, let it thaw for up to EIGHT hours to restore it to room temperature.

tion:The semiconductor luminescence equations (SLEs) DESCRIBE luminescence of semiconductors resulting from spontaneous recombination of electronic excitations, producing a FLUX of SPONTANEOUSLY EMITTED light.

based UPON uExplanation: if u THINK it's HARD it is, if ur weak at maths u have to just practice, don't PANIC u can do it

sameExplanation:time PERIOD of a pendulum only DEPENDS on the length of string and acceleration DUE to gravity so the RATIO of time period will be 1:1

(a) 40 m (b) 7.5 secExplanation:At first I've calculated the ACCELERATION of the bus using v^2 = u^2 - 2as formula. Then using the same formula I've calculated the ANWER a and the SECOND one is calculated using v=u - at.

The advantages of ICS : (i) Extremely small in size, (ii) Low power consumption, (III) Reliability, (iv) REDUCED cost, (V) Very small weight and (vi) Easy replacement.

You can use a LEAD acid charger on a lithium battery if you WANT, HOWEVER, you must NOT use a lead-acid charger if it has an AUTOMATIC “equalisation mode” which cannot be permanently TURNED off.Plz MARK as brainiliest

The voltage starts at 4.2 maximum and quickly drops down to about 3.7V for the majority of the battery LIFE. Once you hit 3.4V the battery is dead and at 3.0V the CUTOFF circuitry DISCONNECTS the battery (more on that later.