Explore topic-wise InterviewSolutions in Current Affairs.

Evidence of COMMON descent of living organisms has been discovered by scientists researching in a variety of disciplines over many DECADES, demonstrating that all life on EARTH comes from a single ancestorm

I HOPE it will HELP you

The electron configuration for aluminum is 1s2 2s2 2p6 3s2 3p1.

Aluminum is found in the first space of the THIRD ROW of the p-block (COLUMNS 13-18) on the periodic table. This MEANS that its electron configuration ENDS in 3p1. All lower energy levels and sub-shells are complete. The noble gas, inner core electron configuration for aluminum is:

The phase difference is <= 90 degrees. It is CUSTOMARY to USE the angle by which the VOLTAGE leads the current. This leads to a positive phase for INDUCTIVE circuits since current lags the voltage in an inductive circuit. The phase is NEGATIVE for a capacities circuit since the current leads the voltage.

There is a subtle difference between specific conductance and equivalent conductance.

As you might have heard before, for specific conductance is actually conductivity of a solution(for cases of electrochemistry), meaning it is the conductance of a given solution for a very special case.

Specific Conductance or conductivity is the conductance of a given solution enclosed in a cell having two electrodes of unit area and are separated by 1cm.

We know that Conductance(C)= Conductivity(K)*A/l

Thus, Conductivity or Specific Conductance(K)=Conductance*l/A

While Equivalent Conductance is also a specific case but a little different than that of the previous one.

Equivalent Conductance is the conductance of all the ions produced by one gram equivalent of an electrolyte in a given solution.

Let Vcm^3 of solution is considered.

We can say that the equivalent conductance is directly proportional to the volume of solution considered, as more the ions, more the conductance.

Thus, Equivalent Conductance(Λ )= Equivalent Conductivity(k)*V(in cm^3)…….(1)

So, here, Equivalent Conductance is the conductance of ions present in Vcm^3 of solution containing 1gm equivalent of the electrolyte, while Equivalent Conductivity is the specific case for unit volume.

Now, to RELATE this equation with gm equivalent(as defined for gm equivalent), we know that Normality= No. of gm equivalents/Volume(in lit). As we have considered a solution containing 1 gm-equivalent.

Thus, Equivalent Conductance(Λ)= Equivalent Conductivity(k)*1000/Normality.

1000 is multiplied as Equivalent Conductance is defined for volume in cm^3 while Normality is defined for volume in litres.

Now, this was all about Specific Conductance and Equivalent Conductance, now coming to your question for relation between them.

With reference to used symbols for various quantities.

K=C*l/A

Multiplying with A in numerator and DENOMINATOR in RHS.

K=C*V/(A^2)

If we consider the solution for unit volume.

K=C*V

Now, you can SEE that this equation is very similar to equation(1).

So, now you should understand that specific conductance is just a concept to quantify and express conductivity of a solution, while Equivalent Conductivity is a special case of it, while considering gm-equivalents, similarly we may also have molar conductivity which is considered for moles in a solution.

So, you can directly, say that Equivalent Conductance = Specific Conductance(when considered for gm-equivalents)* Volume.

POTENTIAL ENERGY=mgh

m=200g =200/1000 kg

=0.2kg

h=5m

g=10m/s²

So,

Potential energy= 0.2*5*10

=10joule

In this case, the IMAGE is magnified; in other words, the image dimensions are greater than the object dimensions. ... Finally, the image is a virtual image. Light rays from the same POINT on theobject REFLECT off the mirror and DIVERGE upon reflection.

Thank You!

Op-amp oscillator

My aim is to find the oscillation frequency of a Phase Shift Oscillator.



I start by finding transfer function of the cascaded RC network.

VO(s)=1C3sR3+1C3sV2(s)=11+R3C3sV2(s).Vo(s)=1C3sR3+1C3sV2(s)=11+R3C3sV2(s).

Similarly,

V2(s)=11+R2C2sV1(s)andV1(s)=11+R1C1sVi(s).V2(s)=11+R2C2sV1(s)andV1(s)=11+R1C1sVi(s).

Then the transfer function is:

H(s)=Vo(s)Vi(s)==1(1+R1C1s)(1+R2C2s)(1+R3C3s)1R1R2R3C1C2C3s3+…⋯(R1R2C1C2+R2R3C2C3+R1R3C1C3)s2+…⋯(R1C1+R2C2+R3C3)s+1H(s)=Vo(s)Vi(s)=1(1+R1C1s)(1+R2C2s)(1+R3C3s)=1R1R2R3C1C2C3s3+…⋯(R1R2C1C2+R2R3C2C3+R1R3C1C3)s2+…⋯(R1C1+R2C2+R3C3)s+1

So the frequency response is:

H(jω)=1jω[(R1C1+R2C2+R3C3)−R1R2R3C1C2C3ω2]+…⋯[1−(R1R2C1C2+R2R3C2C3+R1R3C1C3)ω2]H(jω)=1jω[(R1C1+R2C2+R3C3)−R1R2R3C1C2C3ω2]+…⋯[1−(R1R2C1C2+R2R3C2C3+R1R3C1C3)ω2]

Now, we are looking for a special ωω value, ω0ω0, for which the argument of H(wj)H(wj) will be ±180o±180o. Clearly, it happens when

R1C1+R2C2+R3C3=R1R2R3C1C2C3ω2∣∣ω=ω0.R1C1+R2C2+R3C3=R1R2R3C1C2C3ω2|ω=ω0.

Hence we find the oscillation frequency as

ω0f0==R1C1+R2C2+R3C3R1R2R3C1C2C3−−−−−−−−−−−−−−−−−−√12πR1C1+R2C2+R3C3R1R2R3C1C2C3−−−−−−−−−−−−−−−−−−√.ω0=R1C1+R2C2+R3C3R1R2R3C1C2C3f0=12πR1C1+R2C2+R3C3R1R2R3C1C2C3.

When R1=R2=R3=RR1=R2=R3=R and C1=C2=C3=CC1=C2=C3=C:

f0=3–√2πRCf0=32πRC

However, according to all online articles including Wikipedia, the formula for the oscillation frequency is

f0=12πRC6–√.

As from its NAME, Maximum SPEED, we GET to know that its the highest limit of any body to PRODUCE acceleration, but its obvious that the object must have started with some small acceleration which further increased the speed gradually.

So concluding maximum speed is the final speed of any body.

You can experimentally witness the dual NATURE of light, that is wave and particle in "Double Slit EXPERIMENT".

If you actually wanna get more knowledge about it, then REFER to Class 12th Physics Part-2, Wave OPTICS, or if you are already in class 12th or a passed out, then refer to the Feynman lectures of Physics, Volume-3.

Matter is made up of atoms and molecules (GROUPINGS of atoms) andenergy causes the atoms and molecules to ALWAYS be in motion - either bumping into each other or vibrating back and forth. The motion of atoms and molecules creates a FORM of energy called heat or thermal energy which is present in all matter.

All matter contains heat energy. Heat energy is the result of the MOVEMENT of tiny particles called atoms, molecules or ions in solids, liquids and gases. Heat energy can be transferred from one object to another. Thetransfer or flow due to the difference in temperature between the two OBJECTS is called heat.

Acceleration due to GRAVITY ALWAYS remain CONSTANT for a particular PLANET.

The ANSWER is
COLLER B is VOWEL

It is impossible to travel at the speed of light; answering this from a scientific standpoint is impractical.

However, a few INTERESTING considerations can be made regarding the effects on the human body.

Energy — It takes an infinite amount of energy to accelerate a particle to the speed of light because its RELATIVISTIC mass gradually increases to infinity[1]. To obtain an infinite source of energy—you need to obtain an infinite source of mass. It IMPLIES that you’ve destroyed the universe in this process.

Acceleration — You body will be subject to tremendous amount of forces; death is inevitable. Your body will be RIPPED apart.

Time — Your perception of time comes to a stop—you will notexperience time[2].

Vision — Everything you see in the direction in which you’re traveling will be extremely blue-shifted into extremely short wavelengths.

G=Gm1m2/r2 is the FORMULA for ACCELERATION DUE to GRAVITY

mass of truck= 1000 kg

initial speed of truck= 36 km/h= 10 m/s

FINAL speed of truck= 72 km/h= 20 m/s

Initial KINETIC energy of truck= 1/2 *1000*10*10

                                               = 50000 J

Final kinetic energy of truck= 1/2 *1000*20*20

                                              = 200000 J

Increase in the kinetic energy of truck= final K.E. - initial K.E.

                                                               = 200000-50000

                                                               = 150000 J

The purest substance with definite MASS and fixed PROPORTIONS are known as elements. heater, electric iron, electric GEYSER etc. are the appliances that WORK on heating AFFECT of electric current

Its weight at the centre of earth is 0N as the gravity is ZERO in CENTER of earth plz follow me plz plz plz

Ne is SMALLER than F
As ATOMIC SIZE decreases as we MOVE across periods

Hii dear here is your answer


Polygon LAW of vector addition STATES that if a number of vectors can be REPRESENTED in magnitude and direction by the sides of a polygontaken in the same order, then their resultant is represented in magnitude and direction by the closing SIDE of thepolygon taken in the opposite order.


Hope it's help U

<P>p=(1/2Cv²)/t

C=50x10⁶

v=3×10³

t=2×10⁻³

p=(1/2×50x10⁶×(3×10³)²)/3×10³

=75kW

Bigger raindrop. it has more weight hence the force of ATTRACTION between the SURFACE of the earth and the raindrop is more COMPARED to the the SMALL raindrops.

Don't KNOW SEARCH GOOGLE

Don't know google it or SORRY i WANTED POINTS ACTUALLY

Physics, science that deals with the structure of matter and the interactions between the fundamental CONSTITUENTS of the observable universe. In the broadest sense, physics (from the Greek physikos) is concerned with all aspects of nature on both the macroscopic and submicroscopic levels. Its SCOPE of study encompasses not only the BEHAVIOUR of objects under the action of given forces but also the nature and ORIGIN of gravitational, electromagnetic, and nuclear force fields. Its ultimate objective is the formulation of a few comprehensive PRINCIPLES that bring together and explain all such disparate phenomena.

Hope it helps you.

please mark it as brainliest

Then he will GET a SHOCK with a HUGE SPARK and he or she will BURN.

Yes, it does but in a specific MANNER. The attraction outside the atmosphere is not so strong so it cannot PULL the HEAVENLY bodies to earth rather it BINDS with them in such a way that all the heavenly bodies MOVE in a manner.

The LASER rays are ABLE to identify the persons and MAKE sound when they are CAPTURED on them. They are RED in colour.

SPEED = Distance/time

Distance = Speed × time

Distance = 1531 × 1.02

Distance = 1561.62 m

For REAL TIME SIGNAL

✨ Hey MATE ✨
▶Here's the chemical REACTION ➖⤵➖⤵➖⤵➖⤵➖⤵➖⤵➖⤵



♥ HOPE it helps ♥

VECTOR- A quantity having both magnitude and direction .

Scalar- A quantity having only magnitude.

Motion- A change of in position of an object over time.

Acceleration- Change in velocity of an object with respect to time.

Velocity- SPEED with direction.

Speed- The rate at which the object covers distance.

Distance- Measurement of length between TWO points.

Displacement- Shortest distance COVERED by the object.

Projectile motion- A form of motion experienced by an object.

Centripetal force- The force on an object on a circular path.

Gravity- The force of attraction between all masses in the universe; especially the attraction of the earth's mass for bodies NEAR its surface.

Magnetic field- Area around a magnet.

Power- Rate of work done by an object.

Wave- Transport of energy without the transport of matter.

Simple machine- A mechanical device that changes the direction or magnitude of force.

Electricity- Moving of electric charges.

M = 3*10^24 kg
R = 3200KM = 32*10^5 m
G = ?
G = 6.67*10^-11

F = GMm/R^2 -----------(1)
also,
F = mg ------------(2)
g is a accelaration DUE to gravity.
compare eqn (1) &(2)
mg = GMm/R^2
:. g = GM/R^2
:. g = (6.67 * 10^-11 * 3*10^24)/(32*10^5)^2
:. g =19.54 m/s^2
Hope this will help u.....

It is noticeable in BUILDINGS or outdoor areas that have walls that REFLECT sound instead of absorbing it well. To create an audio recording studio, to KEEP noise down in a busy office or for other reasons, DESIGNERS or those modifying a room often want to reduce reverberation.

Hope it HELPS

:)