Explore topic-wise InterviewSolutions in Current Affairs.

u=0m/sv=80m/st= 20sExplanation:LET the DISTANCE be sThus, V^2 - U^2 = 2as6400=2*40*s6400= 80ss=6400/80S=80 METRE

pump : A ROTARY Pump is a type of pump that is CAPABLE of pumping more liquid than reciprocating pumps with the same weight. Rotary Pumps have working members which move in rotary or both reciprocating and rotary motions to displace a liquid. This displacement is because of the periodic CHANGES in the volume of cylinders and chambers filled by the liquid. The pumps are used for pumping oils and various other heavy viscous liquids. They are preferred for large torque values and low rational SPEEDS. The classification of these types of pumps depends on the types of rotating elements and they INCLUDE:Lobar pumpsScrew pumpsGear pumpsLabyrinth pumpsVane pumps and swash-plateRadial-plunger pumps.

A particle starting from REST UNDERSTANDING your qualifications of association 30 MAXIMUM velocity of the particle PARTICIPANT MOTION to the 30 maximum

Explanation:Let MASS of each particle =mLet initial velocity one particle which is moving ==0And initial velocity of another particle which is at rest=After collision MOMENTUM of these particles =Where =Velocity of one particle Velocity of another particle Bu CONSERVATION of linear momentumInitial momentum=Final momentum after collisionSubstitute the values then we GET m/sHence, the velocity of other particle must have =m/s

a CIRCULAR reminds to velocity v and DIRECTION to the FIND the division PATH to the PARTICLE to the particle is the 70 degree

statical PROJECT horizontal speed is the 23 route metre PER

Newton's second law says that when a constant FORCE acts on a massive body, it causes it to accelerate, i.e., to change its velocity, at a constant rate. In the simplest case, a force applied to an object at rest causes it to accelerate in the DIRECTION of the force. However, if the object is ALREADY in motion, or if this situation is viewed from a MOVING inertial REFERENCE frame, that body might appear to speed up, slow down, or change direction depending on the direction of the force and the directions that the object and reference frame are moving relative to each other.

A particle project angle of URINATION after Second to the have angle is POINT to the PROJECTION villiseri will be the initial point to the fixed point

uuudhdhdhdhjdjshshsuisisjshdgdgdhdhjsjsshbdbdhdjdjidjdhdhdhdudjdbfbfhfhueiwiw

2 NExplanation:By the principle that .:The BUOYANT force on a submerged object is equal to the weight of the fluid displaced.Hence the weight of the fluid displaced = Buoyant force exerted by water on the object = 10 - 8 = 2 N

10 NExplanation:If the body alderdy weighs 10 N,the MASS is 1 kg.on the SURFACE of the earth, g=10 m/s²therefore,it will weigh 10 N.

and moving object ALONG axis of the UNIFORM acceleration 88 metre PER SECOND UNIT for the moving

motor CONVERT energy from the another NAME is SQUARE is your motor

Wave-Particle Duality of LIGHT. Quantum THEORY tells US that both light and matter consists of TINY particles which have wavelike properties associated with them. Light is COMPOSED of particles called photons, and matter is composed of particles called electrons, protons, neutrons.

3/4 is the ANGLE of FRACTION HOPE U will UNDERSTAND

The drift VELOCITY is the average velocity that a particle attains DUE to an ELECTRIC FIELD. FOLLOW ME

200/20 = 10secsExplanation:DISTANCE = SPEED × TIME

B=1/pole strength * force.The MAGNETIC field is GOT by KNOWING the field value and substituting in this EQUATION.

..........................

........................................

...................................

This is the ANSWER PLS MARK me as BRANLIST

250W=q×V 4×10^-3=16×10^-6×V V=0.25×10^3 V=250 VOLT

the types of MOTION are1.translatory motion2.rotatory motion3.vibratory motionExplanation:A body is SAID to be in motion if it CHANGES its POSITION with RESPECT to its surrounding.

e !any SECONDARY quantity, such as VOLUME, derived from a combination of BASE quantities, such as mass, LENGTH, and time.

10. A block and tackle system has the velocity ratio 3.Draw a labelled diagram of the system indicating thepoints of application and the directions of load L andeffort E. A MAN can exert a pull of 200 KGF. (a) Whatis the maximum load he can raise with this pulleysystem if its efficiency is 60% ? (b) If the EFFORT endmoves a distance 60 CM, what distance does the loadmove ?10. A block and tackle system has the velocity ratio 3.Draw a labelled diagram of the system indicating thepoints of application and the directions of load L andeffort E. A man can exert a pull of 200 kgf. (a) Whatis the maximum load he can raise with this pulleysystem if its efficiency is 60% ? (b) If the effort endmoves a distance 60 cm, what distance does the loadmove ?

plz mark it as BRAINLIESTwhen we drop a object from certain height so POTENTIAL ENERGY change into kinetic energyhence,when it REACH down its momentum BECAME zero

they are chemical ,insect and wrinkle RESISTANT they are easily washablethey absorb very LESS waterPLS PLS PLS PLS PLS MARK AS BRAINLIEST..!!!!!!!!!!!!!!!!!!!\¥¥¥¥¥¥¥¥¥¥¥^€^°°®¥

[ML^2T^-2A^-1]HOPE it HELPS.

the ANSWER in the PIC GIVEN below