Explore topic-wise InterviewSolutions in Current Affairs.

ength is INVERSELY proportion to nf=1/n-1 (where n is REFRACTIVE index)we know that blue light has more refractive index then red colourso focal length of convex lens will INCREASE when blue light is used instead of red COLOR

he basics of NONVERBAL communication. ...You have to over-COMMUNICATE just to communicate. ...Avoid relying on visual aids. ...ASK for honest feedback. ...Engage the audience in discussion. ...Start and end with key POINTS

m is centered UPON the LIFE and TEACHINGS of GautamaBuddha, whereas Jainism iscentered on the life andteachings of Mahavira.

he the LIGHT of the suntakes all possible directions, it is SAID to be unpolarized light. When the unpolarized light falls on the TRANSPARENT SURFACE at an angle of incidence equal to thepolarizing angle or Brewster's angle, then it is completely planepolarized.

a sb mc CM mc do KA do pta so JA CM BBC kai is DJ hand Ms DI pe su ka xm mc cha kla to is so bcz bldg is do US

wave, the amplitude can be ANYTHING. There is a simplerelationship between wavelength, frequency, and VELOCITY. You can see this easily: a wave travels ONE wavelength L in one period P, so v = L/P. The period P is defined as the inverse of the frequency F, so P = 1/f.

through the TOPIC thoughroly and UNDERSTAND the CONCEPT.....

8129373982 i will ANSWER you

ere is your answer1)Thyroid gland ◆ Hormones -thyroxine◆Function - It helps in metabolism of carbohydrates,fats and proteins.2) PITUITARY gland◆Hormones - Growth hormone◆Function - It helps in development and growth of an individual.3)Pancreas◆Hormones - Insulin◆Function - It helps in maintaining blood SUGAR LEVEL in the body.Hope it helps:)MARK me brainliest

e METAL part the LIGHTNING discharge PASSES to the EARTH

the RIGHT ANSWER by the WAY KEEP SMILING

identification of each element their appearance and working is to be considered. Below are the noted characteristics of each of these element which should be USED for identification :1) Diode - A diode is a two terminal device which conducts only in forward biased mode.2) Transistor: A transistor is a THREE terminal device having emitter, base and collector. So any three terminal device in the mixture is a transistor.3) Integrated Circuit (IC) - An integrated circuit is a multi terminal device and looks LIKE a CHIP. So any multi terminal device in the mixture is an IC.4) Resistor - A registor is a two terminal device with straight appearance and having rings in it. It conducts whenever a voltage is applied across it. There is no concept of biasing for a resistor.Since both Diode and resistor are two terminal device so they both needs to be identified either by their looks or by working principal i.e. resistor conducts for all the applied voltage while diode conducts only for forward biased voltage.

will WORK. .

re❤❤here's UA answer : Since there is a vacuum between the WALLS of the bottle, the flow of heat by convection is also ruled out. Due to the silvering of the walls heat is not lost by RADIATION. As a result, HOT things kept in a THERMOS flask, do not become cold and cold ones do not become hot for a long time.HOPE IT HELPS UH bYe see uh again plz mark it as brainlist

eread this all PARAGRAPHS for your ANSWER

tripetal acceleration is about 3.39 cm/sec^2 at the EQUATOR (I'm GETTING this NUMBER from the CRC Handbook of Chemistry and Physics), which is about 0.35% the acceleration of GRAVITY at the surface of the earth, g.

it will HELP you

e = FORCE × displcmnt W = F (6 - 0)W = 6f joule

udyjfhdjgfhfcrfccudyfhceucdyfccje udunfuydnfhendkfh

y RESISTORS are CONNECTED?

ind the work done by the pump that ismass*acceleration due to GRAVITY*heightin this case that is :1000*45*9.8=441000 [Convert liter into kg]so work done by the pump is 441000 joule.now according to the formula of powerpower= Work/Time you can FIND the power of the pump in this case that is: Power=441000/60 [60 seconds=1 minute]                                           =7350 wattconvert the watt to horse power by CONVERSION method746 watt EQUAL to 1 horse POWER1 watt is 1/746 horse powerand finally 7350 watt is 1*7350/746so the horse power of the pump is 9.85.Hope this helps.

m is same therefore KE is INVERSELY proportional to mass. Therefore lighter body has more KINETIC energy. If light and heavy bodyhave equal momentam then lighter body will have higher kinetic energy, since it's velocity have to MAKE up for its lighter mass.

ension of WIRE is HALVED.

it on YOUTUBE........

the expression of EXCESS PRESSURE inside the liquid DROP. consider a liquid drop radius (R) and surface tension (T). DUE to excess pressure inside the liquid drop

he ATTACHMENT

the DENSITY I THINK this is not the ENOUGH DATA

ate here is your answer ☺✌⭐REFLECTION - bouncing BACK of light .LAWS OF REFLECTION - ✔incident ray , REFLECTED ray and NORMAL all lie in the same plane ✔angle i = angle E ⭐CHARACTERISTICS OF A PLANE MIRROR ⭐✔image is of the same size as the object .✔image behind the mirror is at the same distance as the object in the front of the mirror .✔the image is virtual and erect ✔image is laterally INVERTED. ⭐VIRTUAL IMAGE⭐- ✔can not be formed on a screenhope this may be helpfull to you ✌✌pls mark as brainlist ✌✌☺@alishka

y ANSWER is too MUCH LONG

a classic example of interference effects in light waves. Two light rays pass through two slits, separated by a distance dand strike a screen a distance, L , from the slits, as    Double slit diffractionIf d < < L then the difference in path length r1 - r2 travelled by the two rays is approximately:r1 - r2  dsin where  is approximately equal to the angle that the rays make relative to a perpendicular line JOINING the slits to the screen.If the rays were in phase when they passed through the slits, then the condition for constructive interference at the screen is:dsin  = m ,m =  1,  2,...whereas the condition for destructive interference at the screen is:dsin  = (m + ) ,m =  1,  2,...The points of constructive interference will appear as bright bands on the screen and the points of destructive interference will appear as dark bands. These dark and bright spots are called interference fringes. Note:In the CASE that y , the distance from the interference FRINGE to the point of the screen opposite the center of the slits (see Fig.22.10) is much less than L ( y < < L ), one can USE the approximate formula:sin   y/Lso that the formulas specifying the y - coordinates of the bright and dark spots, respectively are:y Bm =  brightspotsy Dm =  darkspotsThe spacing between the dark spots isy = If d < < L then the spacing between the interference can be large even when the wavelength of the light is very small (as in the case of visible light). This give a method for (indirectly) measuring the wavelength of light. (See Ex.6 at the end of this Chapter.)The above formulas assume that the slit width is very small compared to the wavelength of light, so that the slits behave essentially LIKE point sources of light.

ength of a lens varies linearly with WAVELENGTH of LIGHT used. This is what leads to chromatic dispersion!SINCE violet light has a shorter wavelength compared to RED light, focal length of a lens will decrease if red light is REPLACED by violet light.Hope that helps!!

d 2OHM in PARALLEL with 8 OHM in SERIES

ts true BCOZ if a ball going in upward direction with CONSTANT velocity have velocity in upward direction but the acceleration i.e. g in DOWNWARD direction

are in SERIES connectionR1+R2=15R4+R5=15now as they are in PARALLEL connection1/R=1/15+1/15+1/R31/R=1/15+1/15+1/151/R=1/5R=5hope its CORRECT

your LEFT HAND THUMB finger,middle finger and fore finger such a way that they are mutually perpendicular to each other. if the forefinger point in the direction of the magnetic field and the middle finger points in the direction of a current the thumb finger gives the direction of the FORCE ACTING on the conductor

re is the ANSWER........