Explore topic-wise InterviewSolutions in Current Affairs.

Answer: The TENSION in the spring is 10N.

EXPLANATION: Because the spring will be streched by an equal force of 5N in OPPOSITE DIRECTION and thus it will be streched by equal amount in both directions giving rise to a tension of 5+5 = 10N.

ANSWER:

EXPLANATION:

Answer:

The speed of light, c ,

equals the wavelength, λ

TIMES the frequency, ν

c =λν

c is a constant. It is USUALLY given as 3.00×10^8 m/s or 3.00×10^10 cm/s.

Frequency has a UNIT of 1/s

, which means 1 cycle per second. It is also given the unit Hertz (Hz) in HONOR of German physicist Heinrich Hertz who proved the existence of electromagnetic waves. 1Hz =1/s

.

EXPLANATION:

please mark as Brainlliest if you WANT to get ALSO

EXPLANATION:

please REFER to the attached file MATE

Answer:

Light travels in different speed in different mediums. For example light travels faster in AIR than in a GLASS. Therefore, it is DUE to the change of speed of light in different medium that the light rays are refracted.This CHANGES according to the density of the medium through which light PASSES

Answer:

The dimensions of L × √(l/g) are [L][T]

Explanation:

We have to find the dimensions of the quantity

l\times \sqrt{l/g}l×

l/g

We know that

Dimension of LENGTH l = [L][L]

Dimensions of acceleration due to GRAVITY g = [LT^{-2}][LT

−2

]

Therefore, dimensions of l × √(l/g)

=[L]\times\sqrt{[L]/[LT^{-2}]}=[L]×

[L]/[LT

−2

]

=[L]\times\sqrt{[T^{2}]}=[L]×

[T

2

]

=[L]\times{[T^{2}]^{1/2}

=[L][T]=[L][T]

Therefore the dimensions of l × √(l/g) are [L][T]

ANSWER:

REAL and INVERTED PROBABLY

ANSWER:

HOPE it HELP U

.................

Answer:

Then by either moving the wire or changing the MAGNETIC field we can induce a voltage and CURRENT within the coil and this PROCESS is known as Electromagnetic INDUCTION and is the basic principle of operation of transformers, motors and generators.

ANSWER:

REDISTRIBUTION of charges takes place.

Charge Q

1

=3μC

Charge q

2

=8μC

When third charge q

3

=−5μC is added to each, then new charges on q

1

and q

2

will be

q

1

′

=3−5=−2μC

and, q

2

′

=8−5=3μC

Now,

In first case,

40=

4πε

0

1

⋅

r

2

3×8

In second case,

F=

4πε

0

1

×

r

2

(−2×3)

∴

40

F

=

3×8

−2×3

or F=−10N

<P>Answer:

POWER = 25 watt

Explanation:

power = work done (in joule)/time (in SEC)

p = w/t

p = 500/20

p= 25

hope it helps you :)

Answer:

OPTION a. only magnitude.

Explanation:

UNDERSTAND ya CYCLE STAND.

Explanation:

joules LAW of heating states that the heat produced in a wire is directly proportional to the :

1)Square of CURRENT (I²)

2)Resistance of the wire (R)

3)time(T) for which current is passed

that is :–

H = (I²×R×T) joules

ℹMat dundho Hamein iSS Duniya ki Tanhai me____________♥

▄▄▄▄▄▄▄▄Abhi Hm Busy HAI Thoda Padhai Me..!!

ANSWER:

The EQUATION of MOTION is wrong.

Explanation:

The CORRECT equation is v=u+at

Answer:

1000+ charge is GIVEN out by the THOUSAND atoms PRESENT in the piece of metal.

Hope it helps buddy!

don't mind me, but are you a fan of NARUTO?

Just asking for FUN!

Explanation:

hi

Ohm's LAW deals with the relationship between voltage and CURRENT in an ideal conductor. The potential difference (voltage) ACROSS an ideal conductor is proportional to the current through it. The CONSTANT of proportionality is CALLED the "resistance", R

mark me as brainlist

Answer:

(The " ohm's LAW" states that the current FLOWING through a conductor is directly proportional to the potential difference APPLIED across it's ends PROVIDED that the temperature is constant.)

THEREFORE your answer.......

"ohms law relates potential difference with current flowing in the circuit"

pls mark as brainliest.......if it helps

Answer:

a.both are solutions

b.copper SULPHIDE,ZINC sulphide.

c.displacement reaction.

d.fe iron

Explanation:

PLEASE mark as brainliest,ALSO please follow me......

ANSWER:

C) VECTOR . Vector= Vector

plz MARK my answer as BRAINLIST

ANSWER:

DONT know please don't mine AA

Answer:

Force on ONE wire due to other is F=BI

2

l where MAGNETIC field B=

2πr

μ

0

I

1

due to FIRST wire at DISTANCE r.

Thus force per unit length between them is F/l=BI

2

=

2πr

μ

0

I

1

I

2

=

2π×1

(4π×10

−7

)×10×10

=2×10

−5

N/m

ANSWER:

-16N

Explanation:

f1+f2+f3=0

f3=-f1-f2

34378905+5673206=53579533

ANSWER:

sorrrrrrrrrrrrŕrrrrrrrry

ANSWER:

overdosing ISOLATIONIST ibinibigay overbidding ichindhi OVOVIVIPARITY untrustful JUSTIFY

Explanation:

U= - 10cm

F= - 20cm

V=?

According to the LENS FORMULA

1/f = 1/v - 1/u

1/-20 = 1/v + 1/10

,,,

1/v = 1/-20 - 1/10

,,

Answer:

The three EQUATION of motion

V = u + at; s = ut + ( 1/2) at2 and v2 = u2 + 2

ANSWER:

yarmouk has long been the best of Abdul Sharma and I have been in HINDI for 123p00 and 2HOURS and I have worked in hindi for the LAST two DECADES in hindi for a long and i

ANSWER:

cluding conveyors, TURNTABLES and others for which adjustable speed and CONSTANT or low-speed torque are required. They also work well in dynamic braking and REVERSING applications, which are common in many industrial machines.

Explanation:

ANSWER:

The FORCES in opposite direction CANCEL out and the net/resultant force is zero. What is the net forceor, equivalently, the resultant force acting on an object in equilibrium? Forces of 10N and 15N in the same direction act on an object.✅✅

ANSWER:

CONCAVE lens

Explanation:

I HOPE this will HELP you... ✌️

#FOLLOW me...

Answer:

Fleming's right-hand rule (for GENERATORS) shows the DIRECTION of induced current when a conductor attached to a CIRCUIT moves in a magnetic field. It can be used to DETERMINE the direction of current in a generator's windings.

ANSWER- the ACTUAL TIME will be 9:25

Answer:

3rd

FORCE

2ND

momentum

1st

REST

motion

direction

force

inertia of rest

Answer:

let's consider it as 2 resistance in parallel..

as resistance = rho×l/area...so rho and aara are same..there for.. R1 /R2= 1/4..and v1 /V2= 1/4...because current is constant

if v is emf.. then vi will be 1/5 v and v2 be 4/5

and HEAT is curent squaree × resistance × time

heat in wire 1 by wire 2 is 1:4

if understood mark as brainliest...else ASK about it in comments

1) TELESCOPE

2) FRICTION

HOPE IT HELPS!

HOPE IT HELPS!PLEASE MARK AS BRAINLIEST!

Answer:

The UNIT of ELECTRICAL RESISTENCE is ‘OHM’

it is REPRESENTED as Ω

thank you :)

Answer:

MAXWELL's correction to Ampere's law

Ampere's law states that “the line integral of resultant magnetic field along a closed plane curve is equal to μ0 time the total current crossing the area bounded by the closed curve provided the ELECTRIC field inside the LOOP remains constant".

Explanation:

hope it helps you DEAR FOLLOW me

Answer:

While both A.C. and D.C. motors serve the same function of converting electrical energy into mechanical energy, they are powered, constructed and controlled differently. 1 The most basic difference is the power source. A.C. motors are powered from alternating current (A.C.) while D.C. motors are powered from DIRECT current (D.C.), such as batteries, D.C. power supplies or an AC-to-DC power converter. D.C wound FIELD motors are constructed with brushes and a commutator, which add to the MAINTENANCE, limit the speed and usually reduce the life expectancy of brushed D.C. motors. A.C. induction motors do not use brushes; they are very rugged and have long life expectancies. The final basic difference is speed CONTROL. The speed of a D.C. motor is controlled by varying the armature WINDING’s current while the speed of an A.C. motor is controlled by varying the frequency, which is commonly done with an adjustable frequency drive control.

A COLONY is a group of people who settle in a new place but keep ties to their homeland. The people who founded the United States FIRST CAME to AMERICA to LIVE as part of a British colony.

Hope it's helpful...

ANSWER:

retina√√√√•••••••••

Answer:

Newton 1st law:

all object will REMAIN at rest or CONTINUE to MOVE with uniform speed unless acted upon by some unbalanced force.This property is called inertia.

Newton 2nd law:

unbalanced force cause an object to ACCELERATE or move with varying speed.

F=ma

Newton 3rd law:

EVERY action produces an equal and opposite reaction.

when one object exerts a force on another object,the other will move with equal and opposite force.

ANSWER:

In [15], Finite Element Method (FEM) based simulation of inter-turn fault is PERFORMED to indicate distortion in the symmetry of leakage flux pattern in the REGION corresponding to the faulted area. This is SENSED through two series connected coils are WOUND to detect presence of fault.

Answer:

Explanation:

=> It's given that,

Current through the WIRE, I = 3.5 ± 0.5 A  

Potential difference, V =  21 ± 1 V  

RESISTANCE , R = ?

=>  As per the Ohm's law:

V = IR

∴ R = V / I

Resistance WITHOUT error, R = V/I = 21/3.5 = 6ᘯ.

=> We can do the calculation of error in resistance as below:

∆R/R = ∆V/V + ∆I/I

∴ ∆R/6 = 1/21 + 0.5/3.5  

∆R/6 = (1/21 + 1/7)

∆R = 6 × 4/21  

∆R = 24/21

∆R = 8/7

∆R ≈ 1.143  

∴  R = (6 ± 1.143) Ω.

Thus, the resistance of the wire is (6 ± 1.143)  Ω

ANSWER:

ZERO... Because the magnetic field presents INSIDE the SOLENOID...

ANSWER:

increases

Explanation:

It is because d WATER EVAPORATES or changes into vapour vigorously due to the strong heat of the sun.

LEAST COUNT of VERNIER CALLIPERS is 0.01.

♣HEY THERE♣

AUXIN is synthesized at the shoot and ROOT tip in PLANTS.

What is auxin?

Auxin is a growth hormone and helps the cells to GROW longer.

☺Hope it helps☺

EXPLANATION:

because of its REFLECTED RAY