Explore topic-wise InterviewSolutions in Current Affairs.

ated WATER is liquid water under pressure at TEMPERATURES between the usual boiling point, 100 °C (212 °F) and the critical temperature, 374 °C (705 °F). PLZ follow me

Formation of ShadowsShadows are ALWAYS FORMED on the opposite side. Transparent OBJECTS cannot form a shadow. They are only formed in opaque or translucent objects. If we take a glass SLAB, no shadow is formed because it ALLOWS light to pass through it.Explanation:This may help you ☺️Thank you

dddddffgffffExplanation: cdsdderrf

ime = t = 0.30 sDistance = S =3.45 mTo find:h =?Explanation:Let h be the height window sill from the ground.An object is following down from the window.∴ a = g =9.81Now, the object is following down from 3.45 m HIGH from the ground.By using the THIRD law of kinematical EQUATIONS = ut + 3.45 = u (0.30) + 0.5 × 9.81  ×0.30  × 0.30u = 25.8924∴ u = 25.89 m\sNow consider the object is following down from the window sill.v = 0 , s = h = ?By the third law of kinematics:0 = 25.89 × 25.89 + 2 × 9.81 × HH = -34.16 mA negative sign shows that object is following down to the ground.∴ h = 34.16 mA window sill is 34.16 m high from the ground.

1 m/s^2Explanation:GIVEN : u = 0 m/s , V = 3 m/s , t = 3sTo FIND : ACCELERATION (a)Solution : a = (v-u) / tThus , a = (3-0) / 3Hence , a = 1 m/s^2

tion:SOLID: Has a definite shape and VOLUME. liquid: Has a definite volume, but take the shape of the CONTAINER. gas: Has no definite shape or volume.

सभी पदार्थ स्थान (त्रि-विमीय स्थान) घेरते हैं। इसी त्रि-विमीय स्थान की मात्रा की माप को आयतन कहते हैं। एक-विमीय आकृतियाँ (जैसे रेखा) एवं द्वि-विमीय आकृतियाँ (जैसे त्रिभुज, चतुर्भुज, वर्ग आदि) का आयतन शून्य होता है।Explanation:PLEASE please FOLLOW me....

☺☺☺goog MORNING

id stateSolids keep their shape and cannot be compressed. Let us see if the particle model can help us understand why solids behave in this way.In a solid, the particles are packed close to each other in fixed positions. They are locked into place, and this explains why solids have a fixed shape. Look at the following images of sodium chloride (table salt). Do you remember the formula for sodium chloride?The liquid stateAn important characteristic of liquids is that they flow. They fill containers they are poured into. Liquids are also not very compressible. How can these properties be explained?Orange juice is a liquid, which can be poured.In the liquid state, particles do not have fixed positions. They move about freely, but they stay close together because the forces of attraction between them are quite strong, but not as strong as in solids.Have you noticed how a liquid always takes the shape of the container it is in? Within the liquid, the particles slip and slide past each other. This is why liquid flows. Their particles are free to move around, filling the spaces left by other particles. Look at the image of the juice being poured. Let's zoom in and have a look at what the particles are doing as the juice is poured.The particles in a liquid have small spaces between them, but not as small as in solids. The particles in a liquid are loosely arranged which means they do not have a fixed shape LIKE solids, but they rather take the shape of the container they are in.The speed at which the particles move around inside the liquid depends on the energy of the particles. When we heat a liquid, we are giving the particles more energy and speeding them up.In gases, the particles move at even greater speeds.The gaseous stateGases spread out quickly to fill all the space available to them. Think of when you blow up a balloon. The air that you blow into the balloon FILLS up the whole balloon. A gas will fill the entire space that is available to it. This is because the particles in a gas have no particular arrangement.Gases do not have a fixed shape. Think about the balloon again: the gas fills the entire space inside the balloon. You can squeeze the balloon, changing the shape.Gases fill the space available to them.Gases do not have a fixed shape.Gas particles move very fast, much faster than in solids and liquids. The particles in a gas possess a lot of energy.Have you ever TRIED to compress the gas in a syringe or in a bicycle pump? Why do you think you can compress the gas?In gases, the forces between particles are very weak. This explains why the particles in gases are not neatly arranged. They are not held together tightly and there are large spaces between them. These spaces are much larger than in the solid and liquid state.Gases can be compressed, because their particles can be forced closer together. Look at the photo of a SCUBA diver underwater. Do you see the tank on his back? He uses this tank to breathe underwater. A scuba diver can stay underwater for almost an hour. How do you think he can GET enough air to breathe for a whole hour from a small tank like that? Discuss this with your class.

mass of the ball (m) =100g or 0.1kginitial velocity (U) =25 SM time (t) = 0.025sec.final velocity (v) = 0Initial momentum = mu = 0.1×25 = 2.5 skgm Final momentum = mv (which is equal to 0, since v is zero)CHANGE in momentum = mv-mu = 0 - 2.5 = -2.5 skgm Average force = timeChangeinmomentum = - 0.025(2.5) = -100 skgm = -100 NThe NEGATIVE sign actually shows that the force was applied opposite to the direction of the motion of the ball. So, the average force applied by the player will be 100

Dear I think it is like Explanation:In the PAST some PEOPLE thought it was trees who was MOVING their leaves that was CREATED by the wind might this will help you dear

Ampere's circuital law STATES that the line integral of magnetic field induction →B around any closed path in vacuum is equal to μ0 times the TOTAL current threading the closed path, i.e., This RESULT is independent of the size and shape of the closed curve enclosing a current. This is KNOWN as Ampere's circuital law.

I don no dugsgyruiefh SEE fhxghddhjfe

oV=2d/t2×63×101/7×6030.3m/s

Vaporization (or vaporisation) of an element or compound is a phase transition from the LIQUID phase to VAPOR. There are two TYPES of vaporization: evaporation and boiling. Evaporation is a surface phenomenon, WHEREAS boiling is a bulk phenomenon....REFERENCES.

Photosynthesis is the process in which GREEN plants use sunlight to make their own FOOD. Photosynthesis requires sunlight, chlorophyll, water, and carbon DIOXIDE gas as raw materials. Chlorophyll is a SUBSTANCE in all green plants, especially in the leaves.

A mirror having a focal length of +10 cm is a convex mirror(a convex mirror has a positive focal length, ACCORDING to the 'new CARTESIAN sign convention').

if you have BRAIN then USE it and TRY to SOLVE with ANSWER yourself

gravitation PULL acts overall on the chair and moreover the weight of the chair has not been forced upon any object (I mean that if the feet are KEPT touch to the ground then while LIFTING the chair the weight is to TRANSFERRED to the feet )but since feet are not touched weight is not forced upon any thing and moreover the gravitational force is always there to playon ....hope you got your ans .Follow me PLEASE

d.Helical ANTENNA.. PLEASE MARK it as a BRAINLIST ANSWER....

Explanation:Quantization of charge implies that charge can assume only certain DISCRETE values. That is to SAY the observed VALUE of electric charge (q) of a particle will be integral MULTIPLES of (e) 1.6×10−19 coulombs.i.e.q=ne where n=0,1,2,.... (both positive and negative integers)The charge cannot assume any value between the integers.

ZERO WORK:The work DONE is said to be zero work when force and displacement are perpendicular to each other or when EITHER force or displacement is zero.example: When we hold an object and walk,the force acts in DOWNWARD DIRECTION whereas displacement acts in FORWARD direction.

the right ANSWER is OPTION a Explanation:HOPE it HELPS you please MARK me as braineilist.

Physics is used heavily in engineering. For example, statics, a SUBFIELD of mechanics, is used in the building of bridges and other static STRUCTURES. The UNDERSTANDING and use of acoustics results in sound control and better CONCERT halls; similarly, the use of OPTICS creates better optical devices.

g is OBVIOUSLY ALWAYS TIED with the load in its hongs and the load is tied perfectly so that the load does not GET imbalanced and falls down

all is thrown vertically upward a=-g Using v^2-u^2=2asWe can say that -u^2=2(-g)s because in vertically projected BODY v=0Substituting value we getu^2=2*10*90 (taking g as 10)u^2=1800u=42 ( approximately)Hope it HELPS pls mark brainliest

nkughe/hfnifwF?NHV dvbugjbffebfhgh/hfnbfeoufhfinbdvhyfhjuueijurboinvihbinhhddjdwwj.nhefhfjfhhfirshhfhieeh9m;jmrw'je;/78Explanation:

A banked surface is one where the surface is not FLAT. ENGINEERS design roads to be banked when the road is curved and vehicles are going to be traveling at significant speeds around the CURVE. Any mass that moves in a circular path undergoes centripetal ACCELERATION, which is equal to v2/R.