Explore topic-wise InterviewSolutions in Current Affairs.

Hey mate ,

here is your answer ,

The other KEY properties EXHIBITED by COPPER and its alloys include:  

Excellent heat conductivity.

Excellent electrical conductivity.

Good corrosion resistance.

Good biofouling resistance.

Good machinability.

Retention of mechanical and electrical properties at cryogenic temperatures.

Non-magnetic.

Hope it HELPS !!!

The reactions in which HEAT ENERGY is released are called exothermic reactions.

In exothermic reactions, a part of the energy present in the reactants is PASSED on to the surroundings from the system in the form of heat.

Thus, the energy of PRODUCTS is LESSER than that of reactants.

A magnet has attractive as well as divertive properties due to presence of POLES in magnet.

If we bring TWO magnets, both having same pole as north- north, then they will repel each other.

If we bring one magnet having North Pole and other having south pole ( OPPOSITE poles), then they will attract each other.

So, this is the phenomenon of DETERMINING of attractive and divertive property of a magnet.

H2S i.e, HYDROGEN SULPHIDE GAS...


#Hope it HELPS.

A molecular level study has been made on enhanced MECHANICAL and tribological properties of graphene-reinforced styrene butadiene rubber (SBR) composites using molecular dynamics simulation technique. Constant strain method is APPLIED to calculate the mechanical properties of developed structures. Two molecular level layer model one with SBR and ANOTHER with graphene-reinforced SBR composites were developed, and shear LOADING was applied on the top and bottom Fe layers to study tribological properties, i.e., abrasion rate, and friction coefficient. The Young’s and shear modulus of composites with different graphene OXIDE volume fractions have been developed and studied. The 5 vol% addition of graphene into SBR matrix shows a significant increase in Young’s and shear modulus and hardness. By incorporation of the GO, 48 and 56% decrease in friction coefficient and abrasion rates of SBR polymer was observed, respectively. About 15% reduction in the RDF values of GO/SBR composites was obtained. The interaction energy between graphene oxide sheet and SBR matrix during the shear process has been obtained and discussed.

MgSO4+BaCl2will GIVE RISE to MgCl2+BaSO4

In chemistry, vapor PRESSURE is the pressure that is exerted on the WALLS of a sealed container when a substance in it evaporates (CONVERTS to a GAS). To find the vapor pressure at a given temperature, use the Clausius-Clapeyron EQUATION: ln(P1/P2) = (ΔHvap/R)((1/T2) - (1/T1)).

I think it's hipl U :-))

Cl-2,8,7
na-2,8,1
al-2,8,3

As the SUGARY toxic substance sticks in between the teeths which causes tooth DECAY and results in CAVITY.

Sulphur DIOXIDE is the gas which TURNS acidified POTASSIUM DICHROMATE clear green.

hope it will help you

ANSWER:

Explanation:

for 2ND exitation POTENTIAL of He+

Z = 2

n= 2

E = 13.6*Z2/n2 = 13.6 eV

Hope it CLEARS...............................

Balanced Equation = H₂ + Cl₂ => 2 HCl

According to stoichiometry,

2 G of Hydrogen reacts with 71 g of chlorine to FORM 73 g of Hydrogen Chloride.

Therefore if 10 g reacts with 142 g of chlorine, the HCl produced will be

152 g or 152 ml of HCl

Mixture because it has TWO substances and a THING is pure only when it has only one constituent.

HOPE THE ANSWER HELPS YOU. PLS PLS MARK THE ANSWER AS BRAINLIEST ANSWER.

Molarity = Number of moles of solute / Volume of SOLUTION in liters

Number of moles of solute = GIVEN MASS / MOLAR mass

Given mass = 4 g

Molar mass of solute = NaOH = 23 + 16 + 1 = 40 g

Number of moles = 4 g / 40 g = 0.1 mole

Volume of solution = 250 ml = 0.25 liters

=> Molarity = 0.1 / 0.25 = 100 / 25 = 0.4 M

Hence molarity of that solution is 0.4 M.

Since ATOMIC number=no of electrons THEREFORE there are 13 electrons in the given ELEMENT

I'm GIVING you answer but please mark it as BRAIN LIST.

HERE IS YOUR ANSWER

________________________________
When you actually pass ELECTRICITY, the GLUCOSE solution doesn't conduct electricity as in case of acids because there is no liberation of IONS which help in the CONDUCTION of electricity.
________________________________

THANK YOU

Hey friend here is your ans

♡＾▽＾♡

Cotton is a soft, FLUFFY STAPLE fiber that grows in a boll, or protective CASE, around the seeds of the cotton plants of the genus GOSSYPIUM in the mallow family Malvaceae.
The cotton chemical name is Gossypium.

(HOPE it helps)

Hii...
the answer to your QUESTION is....
they do not match with their native names because they are based on the latin names of the elements...
for example:-the latin name of GOLD is AURUM and THEREFORE the symbol of gold is Au.

The name of I U P A C is International UNION of PURE and APPLIED chemistry


plzzz market as brainliest

The IODINE PRODUCED from the PERSULFATE- IODIDE reaction (1) is immediately reduced .... CHLORIDE, KCl; (v) 0.1M potassium sulfate, K2SO4.

steam produces more SEVER burns than boiling water at same temp. becaue it has more enerygy than boiling water in form of latent heat of vapourisation so when it will touch your skin, it will transfer this ENERGY to your skin and produce more severe burns.

PLEASE MARK BRAINLIEST

The technique used depends on whether the liquids dissolve in each other, and so are miscible, or if they are immiscible. Fractional distillation is a technique used to SEPARATE liquids ACCORDING to their boiling points. CHROMATOGRAPHY is used to separate MIXTURES of coloured compounds

Sublimation is a PROCESS in which any solid change direct into VAPOUR on heating when we BURN CAMPHOR this process OCCUR

The PRINCIPLE. is
due to high force of spinning
the denser PATRICK HAST stay at bottom and lighter PARTICLES COMES on top

COMPONENTS of a solution composed of a non-volatile solid SOLUTE and a liquid solvent can be separated by distillation. Mixtures of liquids with reasonably different boiling POINTS can also be separated by distillation. Solutions with SEVERAL components can be separated by paper or thin-layer

The components of the CHANGE in Gibbs FREE energy are different, however. As water freezes, the water molecules become more ordered and so the entropy change is negative. ... INTERACTIONS between BIOLOGICAL molecules that occur spontaneously can also be driven either by entropy or enthalpy.

Pls vote

The term “plastics” includes materials composed of VARIOUS elements such as CARBON, hydrogen, oxygen, nitrogen, chlorine, and sulfur. Plastics typically have high molecular weight, meaning each MOLECULE can have thousands of atoms bound TOGETHER.

3,3,5 TRI METHYL hex -1- ene 2 -OL

Your ANSWER is COMPLETE.

The LEAST AMOUNT of HEAT REQUIRED for the FUSION

Iron is ACTUALLY FOUND in grey or silver but DUE to rusting ot TURNS INT reddish-brown

LOW in calories but DENSER than red radishes, horseradish is very high in vitamin C (for IMMUNITY, collagen formation, energy, the NERVOUS ...

Different chemicals are used in FIREWORKS which give them different colours. The green colour that we see in the fireworks is due to the presence of barium Chloride (BaCl2).

This is based on the phenomenon of incandescence, which is the phenomenon by which elements emit different colours on HEATING (just like IRON turns RED on being heated and then white-hot as the temperature rises).

Because it do not RELEASE more H +ve IONS when DISSOLVED

So BORING I HATE SCIENCE

Hi friend .....

There are certain chemical REACTIONS which are accompanied with change in color of the products.....

here is the example....

when crystal of copper carbonate, which are in green in color, are heated strongly then it forms a black compound of copper oxide off carbon dioxide GAS...
HERE IS EQUATION....

CuCO3--------}CuO+CO2

I HOPE I HELPED YOU....

PLEASE MARK IT AS BRAINLIST IF IT'S HELPFUL.....

How it changes the red litmus paper to BLUE litmus paper
METHYL ORANGE
phenopthalin

N2+2O2->2N02






..........