Explore topic-wise InterviewSolutions in Current Affairs.

This section includes 7 InterviewSolutions, each offering curated multiple-choice questions to sharpen your Current Affairs knowledge and support exam preparation. Choose a topic below to get started.

1.

37.For which color focal length of concave lens is maximum

Answer» 37.For which color focal length of concave lens is maximum
2.

a uniform wire of length and mass is stretched between two fixed point having tension. a sound frquency is impressed on it .then the maximum vibrational energy is developedd in the wire when v=

Answer» a uniform wire of length and mass is stretched between two fixed point having tension. a sound frquency is impressed on it .then the maximum vibrational energy is developedd in the wire when v=
3.

How will the resistance be affected if the various parameters are changed as follows?i) Length increasesx) Resistance increasesii) Area increasesy) Resistance decreasesiii) Resistivity decreasesz) Resistance remains the sameiv) Temperature increasesv) Velocity increases

Answer»

How will the resistance be affected if the various parameters are changed as follows?

i) Length increasesx) Resistance increasesii) Area increasesy) Resistance decreasesiii) Resistivity decreasesz) Resistance remains the sameiv) Temperature increasesv) Velocity increases



4.

if the arnount of charge passed in time t through a cross - section of wire is Q= 8t - 2t^2 , then average current from t=0 t=2 second is

Answer» if the arnount of charge passed in time t through a cross - section of wire is Q= 8t - 2t^2 , then average current from t=0 t=2 second is
5.

A uniform wire of resistance 100 Ω is melted and recasted into a wire of length twice that of the original. The resistance of the new wire is _____.

Answer»

A uniform wire of resistance 100 Ω is melted and recasted into a wire of length twice that of the original. The resistance of the new wire is _____.

6.

The electric power of a device can be calculated using P=I2R or P=V2/R . The first expression indicates that the resistance is directly proportional.where as in the second one the R is inversely proportional. How can the seemingly different dependence between P and R in these expressions be explained .

Answer» The electric power of a device can be calculated using P=I2R or P=V2/R .
The first expression indicates that the resistance is directly proportional.where as in the second one the R is inversely proportional. How can the seemingly different dependence between P and R in these expressions be explained .
7.

Sir I am Shaun job of class 10, I have a doubt regarding physics on the topic of optics, This is the question Sir Why do wet clothes appear darker than dry clothes? Thank you so much for your time Sir Shaun

Answer»

Sir

I am Shaun job of class 10, I have a doubt regarding physics on the topic of optics,

This is the question Sir

Why do wet clothes appear darker than dry clothes?

Thank you so much for your time Sir

Shaun

8.

What kind of images is formed by the concave lens? Statement 1: Upright, virtual and smaller than the object. ​Statement 2: Inverted, real and larger than the object.

Answer» What kind of images is formed by the concave lens?
Statement 1: Upright, virtual and smaller than the object.
Statement 2: Inverted, real and larger than the object.
9.

How much heat energy is necessary to raise the temperature of 5 kg of waterfrom 20oC to 100oC ?

Answer»

How much heat energy is necessary to raise the temperature of 5 kg of water



from 20oC to 100oC ?



10.

Red light is used for danger signal as

Answer»

Red light is used for danger signal as


11.

A long straight wire of radius a carries a steady current the current is uniformly distributed over its cross section the ratio of the magnetic field B and B` at radial dis†an ce a/2 and 2a respectively from the axis of wire is

Answer» A long straight wire of radius a carries a steady current the current is uniformly distributed over its cross section the ratio of the magnetic field B and B` at radial dis†an ce a/2 and 2a respectively from the axis of wire is
12.

Suppose a condition where a scissor has equal effort arm and equal load arm. How will it work ?

Answer» Suppose a condition where a scissor has equal effort arm and equal load arm. How will it work ?
13.

Why we are not able to see and destroy energy?

Answer» Why we are not able to see and destroy energy?
14.

58.Find the magnetic field at point 0 due to semi-infinite wire shown in figure.

Answer» 58.Find the magnetic field at point 0 due to semi-infinite wire shown in figure.
15.

An object is placed at a distance of 20 cm in front of a concave mirror of focal length 10 cm. Calculate the image distance (in cm).-20

Answer» An object is placed at a distance of 20 cm in front of a concave mirror of focal length 10 cm. Calculate the image distance (in cm).
  1. -20
16.

100. Find the acceleration of pulley in the figure.

Answer» 100. Find the acceleration of pulley in the figure.
17.

If the density and radius of the earth are doubled, then acceleration due to gravity will be. Expecting a quick response

Answer» If the density and radius of the earth are doubled, then acceleration due to gravity will be. Expecting a quick response
18.

A steering wheel of diameter 0.5 m is rotated anticlockwise by applying two forces each of magnitude 5 N. Draw a diagram to show the application of forces and calculate the moment of the forces applied.

Answer»

A steering wheel of diameter 0.5 m is rotated anticlockwise by applying two forces each of magnitude 5 N. Draw a diagram to show the application of forces and calculate the moment of the forces applied.

19.

The range of the wavelength of those electromagnetic waves which are visible to us is

Answer»

The range of the wavelength of those electromagnetic waves which are visible to us is


20.

How does the resistance of a wire vary with its cross-sectional areal?

Answer»

How does the resistance of a wire vary with its cross-sectional areal?

21.

minimum magnifying power of a simple microscope is 8. maximum magnifying power of the microscope will b

Answer» minimum magnifying power of a simple microscope is 8. maximum magnifying power of the microscope will b
22.

Identify the part of the human ear that converts sound into electrical impulses.

Answer»

Identify the part of the human ear that converts sound into electrical impulses.

23.

2 parallel co-axial circular coils have N turns carry a current i in each coil, in the same direction when seen from a point on common axis seen outside the space between the coils. The radius of each coil is R and they are seperated by 21.732R. The magnetitic induction at a the midpoint of the common axis is approximately - 1 Ni/31.73R 2 Ni/16R 3 Ni/8R 4 Ni/61.73R

Answer» 2 parallel co-axial circular coils have N turns carry a current i in each coil, in the same direction when seen from a point on common axis seen outside the space between the coils. The radius of each coil is R and they are seperated by 21.732R. The magnetitic induction at a the midpoint of the common axis is approximately - 1 Ni/31.73R 2 Ni/16R 3 Ni/8R 4 Ni/61.73R
24.

Draw magnetic field lines around a bar magnet. [3 MARKS]

Answer»

Draw magnetic field lines around a bar magnet. [3 MARKS]



25.

Why does a current carrying conductor kept in a magnetic field experience force? On what factors does the direction of this force depend? Name and state the rule used for the determination of the direction of this force.

Answer» Why does a current carrying conductor kept in a magnetic field experience force? On what factors does the direction of this force depend? Name and state the rule used for the determination of the direction of this force.
26.

A parallel beam of light is incident on a face of a prism of refracting angle 60^° . Find the refractive index of the prism if the angle of minimum deviation is 40^° . What is the new angle ofminimum deviation if the prism is immersed in water of refractive index 1.33?

Answer» A parallel beam of light is incident on a face of a prism of refracting angle 60^° . Find the refractive index of the prism if the angle of minimum deviation is 40^° . What is the new angle ofminimum deviation if the prism is immersed in water of refractive index 1.33?
27.

Name two organisms which can live without oxygen how do they get energy ?

Answer» Name two organisms which can live without oxygen how do they get energy ?
28.

Electric generators convert

Answer»

Electric generators convert


29.

A 45∘ bend of uniform diameter of 80cm in horizontal plane. The magnitude of the force (in kN,) rounded off to two decimal places) exerted by the flowing water on the bend for following data is____.(i) Flow rate in pipe =0.8m3/sec.(ii) Pressure at inlet =20kPa(iii) Friction across the bend in negligible. 8.5

Answer» A 45 bend of uniform diameter of 80cm in horizontal plane. The magnitude of the force (in kN,) rounded off to two decimal places) exerted by the flowing water on the bend for following data is____.

(i) Flow rate in pipe =0.8m3/sec.



(ii) Pressure at inlet =20kPa



(iii) Friction across the bend in negligible.
  1. 8.5
30.

(a) What is a fuel? Give five examples of fuels. (b) What are the characteristics of an ideal fuel (or good fuel) ? (c) The calorific value and ignition temperature of fuel A re 55 kj/g and 80∘C, respectively. These values for fuel B are 80 kj/g and 10∘C, respectively. On burning, the fuel A produces CO2 and H2O while the fuel B produces CO2, CO and SO2. Give three points of relative advantages and disadvantages of these two fuels.

Answer»

(a) What is a fuel? Give five examples of fuels.
(b) What are the characteristics of an ideal fuel (or good fuel) ?
(c) The calorific value and ignition temperature of fuel A re 55 kj/g and 80C, respectively. These values for fuel B are 80 kj/g and 10C, respectively. On burning, the fuel A produces CO2 and H2O while the fuel B produces CO2, CO and SO2. Give three points of relative advantages and disadvantages of these two fuels.

31.

Snell’s law of refraction is given by

Answer»

Snell’s law of refraction is given by


32.

In an LR circuit with DC source of EMF the rate at which energy stored in the inductor is plotted against time during growth of current in the circuit. Draw a graph for the above situation

Answer» In an LR circuit with DC source of EMF the rate at which energy stored in the inductor is plotted against time during growth of current in the circuit. Draw a graph for the above situation
33.

17.The value of 20162016 201720172017 - 201620162016 20172017

Answer» 17.The value of 20162016 201720172017 - 201620162016 20172017
34.

Shown in the figure is a semicircular metallic strip that has thickness t and resistivity ρ . Its inner radius is R1 and outer radius is R2 . If a voltage V0 is applied across its two ends, a current I flows in it. The value of current I is given by :

Answer»

Shown in the figure is a semicircular metallic strip that has thickness t and resistivity ρ . Its inner radius is R1 and outer radius is R2 . If a voltage V0 is applied across its two ends, a current I flows in it. The value of current I is given by :






35.

Prove that resis†an ce is depend on dimension but resistivity is in dependent on dimension

Answer» Prove that resis†an ce is depend on dimension but resistivity is in dependent on dimension
36.

a sphere of mass 1kg is placed on the surface of the earth calculate the magnitude of the forceof gravitation exerted on the sphere by the earth given mass of the earth=6.0×10000000000000000000000000 kg and radius of the earth=6.4×10000000

Answer» a sphere of mass 1kg is placed on the surface of the earth calculate the magnitude of the forceof gravitation exerted on the sphere by the earth given mass of the earth=6.0×10000000000000000000000000 kg and radius of the earth=6.4×10000000
37.

The following diagrams show the splitting up of a composite light into its constituent colours.Which among the above figures is correct?

Answer»

The following diagrams show the splitting up of a composite light into its constituent colours.



Which among the above figures is correct?



38.

35. What is relative mass ?

Answer» 35. What is relative mass ?
39.

A 1cm object is placed perpendicular to the principal axis of a convex mirror of focal length 7.5cm. Its distance from the mirror if the image formed is 0.6cm in size is-

Answer»

A 1cm object is placed perpendicular to the principal axis of a convex mirror of focal length 7.5cm. Its distance from the mirror if the image formed is 0.6cm in size is-


40.

35. If the molality of a solution becomes n time of the initial molality , the change in elevation in boiling point will be

Answer» 35. If the molality of a solution becomes n time of the initial molality , the change in elevation in boiling point will be
41.

Fusion stops in stars due to which the nuclei of which element being produced?

Answer»

Fusion stops in stars due to which the nuclei of which element being produced?


42.

Define Polarization.

Answer» Define Polarization.
43.

A convex lens of focal length 25 cm and a concave lens of focal length 10 cm are placed in close contact with one another. (a) What is the power of this combination ? (b) What is the focal length of this combination ? (c) Is this combination converging or diverging ?

Answer»

A convex lens of focal length 25 cm and a concave lens of focal length 10 cm are placed in close contact with one another. (a) What is the power of this combination ? (b) What is the focal length of this combination ? (c) Is this combination converging or diverging ?

44.

A brick stone of mass 5 kg is at a height above the ground. If the potential energy of the stone is 100 J. Find the height of the stone with respect to the ground.(Take g=10m s−2)

Answer»

A brick stone of mass 5 kg is at a height above the ground. If the potential energy of the stone is 100 J. Find the height of the stone with respect to the ground.

(Take g=10m s2)

45.

why does the eye have convex lens instead of concave lens?

Answer» why does the eye have convex lens instead of concave lens?
46.

if the heat of hydrogenation of 1-pentene is -123KJ/mol which one of the following has -230KJ/mol heat (1) 2-pentene (2) penta-1,2 diene (3) penta-1,3 diene (4) penta-1,4 di

Answer» if the heat of hydrogenation of 1-pentene is -123KJ/mol which one of the following has -230KJ/mol heat (1) 2-pentene (2) penta-1,2 diene (3) penta-1,3 diene (4) penta-1,4 di
47.

For the coil in the diagram below, when the switch is pressed : (a) what is the polarity of end A ? (b) which way will the compass point then ?

Answer»

For the coil in the diagram below, when the switch is pressed :

(a) what is the polarity of end A ?

(b) which way will the compass point then ?

48.

A lens having two spherical surfaces bulging outward is called ______________.

Answer»

A lens having two spherical surfaces bulging outward is called ______________.



49.

Two thin lenses of focal lengths, f1 and f2 are in contact and coaxial. The combination is equivalent to a single lens of power:

Answer»

Two thin lenses of focal lengths, f1 and f2 are in contact and coaxial. The combination is equivalent to a single lens of power:

50.

Mention a few properties of carbon monoxide.

Answer»

Mention a few properties of carbon monoxide.