Explore topic-wise InterviewSolutions in Current Affairs.

This section includes 7 InterviewSolutions, each offering curated multiple-choice questions to sharpen your Current Affairs knowledge and support exam preparation. Choose a topic below to get started.

1.

The Power Factor Of A D.C. Circuit is Always (A) Less Than Unity (B) Unity (C) Greater Than Unity (D) Zero

Answer»

The Correct option is (D) Zero

2.

The transformer turns ratio determines (A) the reflected impedance (B)the ratio of primary and secondary voltages (C) the ratio of primary and secondary currents (D) All of these

Answer»

(D) All of these

3.

In Shell type transformers the core has ______ limbs (A) One (B) two (C) three (D) four

Answer»

In Shell type transformers the core has three  limbs. 

4.

 Which of the following theorems helps in simplifying computations when the load across a circuit is varying?(A) Superposition (B) Norton’s (C) Thevenin’s (D) Maximum power transfer

Answer»

(D) Maximum power transfer

5.

Which supply is used for the transformers (A)DC (B) AC & DC (C) AC (D) All of the above

Answer»

AC supply is used for the transformers.

6.

Which Power Of The Following is The Product Of Voltage And Current is(A) True Power(B) Reactive Power(C) Voltamperes(D) Instantaneous Power

Answer»

(C) Voltamperes

7.

What is represented by the hypotenuse of impedance triangle? (A) Impedance drop (B) Resistance (C) reactance (D)apparent power

Answer»

(A) Impedance drop 

8.

For A Sine Wave With Peak Value Imax The R.M.S. Value is (A) 0.5 Imax (B) 0.707 (C) 0.9 (D) 1.414 Lmax

Answer»

For A Sine Wave With Peak Value Imax The R.M.S. Value is 0.707.

9.

Power Factor Of The Following Circuit Will Be Unity(A) Inductance (B) Capacitance (C) Resistance (D) Both (A) And (B) 

Answer»

(C) Resistance

10.

 If the peak value of a certain sine wave voltage is 10V, what is the peak to peak value? (A) 20V (B) 10V (C) 5V (D) 7.07V

Answer»

The Correct option is (D) 7.07V

11.

 Magnetic flux has he unit of ________(a) Newton (b) Ampere turn (c) Weber (d) Tesla

Answer»

 Magnetic flux has he unit of Ampere turn.

12.

Core type transformer is a ________ circuit. (A)Single (B) double (C) Single &double (D) none of these

Answer»

Core type transformer is a double circuit. 

13.

For Half wave Rectifier Second alternation is (A) ZERO (B) Positive (C) Negative (D) None

Answer»

For Half wave Rectifier Second alternation is ZERO. 

14.

The value of supply voltage for 400 W, 4 Ω load is (A) 40 V(B) 20 V (C) 100 V (D) 1600 V

Answer»

The value of supply voltage for 400 W, 4 Ω load is 40.

15.

The equation for 25 cycles current sine wave having rms value of 30 amps, will be (A) 42.4sin50πt (B) 42.4sin25πt (C) 30sin25πt (D) 30sin25πt

Answer»

(A) 42.4sin 50πt 

16.

The phase angle difference between current and voltage is 90°, the power will be (A) zero (B) maximum (C) minimum (D) VI

Answer»

The Correct option is (A) zero

17.

An inductor stores ________ energy (a) Electrical energy (b) Magnetic energy (c) mechanical energy (d) All

Answer»

 An inductor stores magnetic energy energy. 

18.

 The Range Of Power Factor Value (A) [1 1] (B) [-1 1] (C) [1 0] (D) [0 0.5]

Answer»

The Correct option is (B) [-1 1] 

19.

In symmetrical wave RMS Value is calculated for (A) one Alternation (B) Full Cycle (C) Both(D) None

Answer»

(A) one Alternation 

20.

Power consumed in Resistor is(A)VI (B) VIcosɸ (C) VI sinɸ (D) VI tanɸ

Answer»

The Correct option is (A)VI

21.

In pure inductive circuit current ______voltage by 90°(A) lead (B) lag (C) in phase with (D) none

Answer»

In pure inductive circuit current in phase with  voltage by 90°

22.

Average Value of sinusoidal Voltage is (A) Vm/√2 (B) 2Vm/π (C) VI /sinɸ (D) VI/cosɸ

Answer»

Average Value of sinusoidal Voltage is 2Vm/π. 

23.

The rms value of sinusoidal voltage wave V = 200sinωt, is (A) 200/√2 V (B) 100/√2 V (C) 200√2 V (D) 100√2 V

Answer»

(A) 200/√2 V

24.

RMS Value of sinusoidal Voltage is (A) Vm/√2 (B) 0 (C) VI /sinɸ (D) VI/cosɸ

Answer»

RMS Value of sinusoidal Voltage is Vm/√2. 

25.

Power factor CosФ= (A) ZR (B) RZ (C) R/Z (D) Z/R

Answer»

Power factor CosФ= R/Z.

26.

Whenever there is a relative motion of a coil & a magnetic field, a voltage is induced in the coil. Such a voltage is called(A) Statically induced voltage (B) Dynamically induced voltage (C) Self-induced voltage (D) Mutually induced voltage

Answer»

(B) Dynamically induced voltage 

27.

Two resistors each of 4Ω and 12Ω are connected in parallel and the parallel combination is connected in series with a 2Ω resistor. If this circuit is connected across a 100V supply , the total current drawn is (A) 50A (B) 25A (C) 20A (D) 2A

Answer»

The Correct option is (C) 20A

28.

If a flux of Φ Weber’s links with a coil of N turns , the induced voltage in the coil is given by (A) N dΦ/dt (B) –N dΦ/dt (C) NBlu (D) none

Answer»

(B) –N dΦ/dt 

29.

Form factor of sinusoidal Voltage is (A) 1.11 (B) 2 (C) 3 (D) 4

Answer»

Form factor of sinusoidal Voltage is 1.11. 

30.

The direction of magnetic field is from(A) North-south (B) South-North (C) Both (D) None of these

Answer»

(A)North-south 

31.

The polarity of the induced voltage is determined by ; (A) Ampere’s law (B) Lenz’s law (C) Kirchhoff’s law (D) Right hand rule

Answer»

(B) Lenz’s law 

32.

Thevenin’s Voltage is (a) Open circuit voltage (b) Short Circuit Voltage (c) Closed Circuit voltage (d) None of these

Answer»

(a) Open circuit voltage

33.

Direction of Induced EMF is given by (A) Flemings Right hand rule (B) Flemings Left hand rule (C) Faraday Law (D) Lenzs Law 

Answer»

(A) Flemings Right hand rule 

34.

The direction of dynamically Induced EMF can be determined with the help of (a) Lenz’s Law (b) Flemings Left Hand Rule (c) Flemings Right Hand Rule (d) None of these

Answer»

(b) Flemings Left Hand Rule

35.

A Loop in a Circuit is defined as a (a) Closed path (b) Junction point of two or more branches (c) inter connected elements (d) All of these

Answer»

(a) Closed path

36.

Faradays- First law the induced EMF is (a) Dynamically Induced EMF (b) Statically Induced EMF(c) Eddy EMF (d) None of these

Answer»

(a) Dynamically Induced EMF

37.

KCL is applicable at (a) A Junction (b) Resistor (c) Loop (d) All of these

Answer»

(a) A Junction

38.

Super-Position Theorem is applicable for a (a) Linear Bilateral Network (b) Non- Linear Bilateral Network (c) Linear Uni-ateral Network (d)All the above

Answer»

(a) Linear Bilateral Network 

39.

 Laminated insulations coated with varnish are normally used in the transformer(A) To reduce reluctance of magnetic path (B) To reduce the effect of eddy current (C) To reduce the hysteresis effect (D) To increase the reluctance of magneticpath

Answer»

(B) To reduce the effect of eddy current

40.

All The Rules And Laws Of D.C. Circuit Also Apply To A.C. Circuit Containing(A) Capacitance Only (B) Inductance Only (C) Resistance Only (D) All Above

Answer»

(D) All Above

41.

The voltage induced in an inductor of L henry is represented by(A) Li (B) L/I (C) L di/dt (D) None of these

Answer»

The Correct option is (C) L di/dt

42.

The unit of capacitance is (a) ohms (b) Farads (c) Amperes (d) Tesla

Answer»

 The unit of capacitance is Farads.

43.

The Units For Resistance is (A) Farads (B) Henry (C) Ohms (D) Voltage

Answer»

 The Units For Resistance is Ohms.

44.

The Units For Current is (A) Farads (B) Henry (C) Ohms (D) Ampere

Answer»

The Units For Current is Ampere.

45.

 The Units For Capacitor is (A) Farads (B) Henry (C) Ohms (D) None

Answer»

The Units For Capacitor is Farads.

46.

The unit of inductance is (a) ohms (b) Volts (c) Amperes (d) Henry

Answer»

 The unit of inductance is Henry.

47.

The unit of resistance is (A) Ohms (B) Volts (C) Amperes (D) Tesla

Answer»

The unit of resistance is Ohms.