The pressure of a compound at 200 K is 10 mm Hg and at 400 K it is 50 mm Hg, what is the pressure at T = 250 K?(a) 18.1 mm Hg(b) 24.2 mm Hg(c) 36.3 mm Hg(d) 48.4 mm HgThe question was posed to me in unit test.I'm obligated to ask this question of Modeling and Predicting Vapor Pressure in section Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering

The pressure of a compound at 200 K is 10 mm Hg and at 400 K it is 50

1.	The pressure of a compound at 200 K is 10 mm Hg and at 400 K it is 50 mm Hg, what is the pressure at T = 250 K?(a) 18.1 mm Hg(b) 24.2 mm Hg(c) 36.3 mm Hg(d) 48.4 mm HgThe question was posed to me in unit test.I'm obligated to ask this question of Modeling and Predicting Vapor Pressure in section Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
Answer» RIGHT CHOICE is (a) 18.1 mm HG To elaborate: Let the pressure of the COMPOUND is given by ln p* = a + b/T, => ln 10 = a + b/200, ln 50 = a + b/400, => ln 5 = -b/400, => b = -643.7, => a = 5.5, => At T = 250 K, ln p* = 5.5 – 643.7/250 = 2.9, p = 18.1 mm Hg.

Discussion

No Comment Found

Related InterviewSolutions

A process is carried out for the feed mixture of 90% air and 10% water vapor, the compressor recovered 90% of water, what is the exit pressure of the compressor if the partial pressure of water vapor is 50 mm Hg?(a) 286.1 mm Hg(b) 396.4 mm Hg(c) 458.7 mm Hg(d) 529.5 mm HgThe question was asked by my college director while I was bunking the class.My doubt is from Condensation topic in portion Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
Pressure of a gas at temperature T is P, What is the pressure of the gas at 2T, use B = 1?(a) Pe^1/T(b) Pe^1/2T(c) Pe^1/3T(d) Pe^1/4TI have been asked this question in an online interview.My enquiry is from Modeling and Predicting Vapor Pressure topic in division Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
A process is carried out for the feed mixture of 40% air and 60% oxygen, the compressor recovered 2% of oxygen, what is the exit pressure of the compressor, if the partial pressure of oxygen vapor is 5 mm Hg?(a) 2.4 mm Hg(b) 4.8 mm Hg(c) 6.5 mm Hg(d) 8.4 mm HgThis question was posed to me during an interview for a job.Origin of the question is Condensation topic in portion Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
A process is carried out for the feed mixture of 50% air and 50% methane vapor, the compressor recovered 20% of methane, what is the exit pressure of the compressor, if the partial pressure of methane vapor is 25 mm Hg?(a) 56.3 mm Hg(b) 78.9 mm Hg(c) 92.1 mm Hg(d) 98.7 mm HgThis question was addressed to me in homework.The origin of the question is Condensation in portion Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
A process is carried out for the feed mixture of 80% air and 20% CO2, the compressor recovered 50% of CO2, what is the exit pressure of the compressor, if the partial pressure of CO2 is 15 mm Hg?(a) 135 mm Hg(b) 145 mm Hg(c) 175 mm Hg(d) 200 mm HgThis question was posed to me by my college director while I was bunking the class.Query is from Condensation in chapter Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
A process is carried out for the feed mixture of 95% air and 5% ammonia vapor, the compressor recovered 40% of ammonia, what is the exit pressure of the compressor, if the partial pressure of ammonia vapor is 10 mm Hg?(a) 225.4 mm Hg(b) 326.8 mm Hg(c) 451.2 mm Hg(d) 593.5 mm HgThe question was posed to me by my school teacher while I was bunking the class.I want to ask this question from Condensation in chapter Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
What is the fraction of water vapor at 27^oC and 1 atm, if the fraction of water vapor at 127^oC and 1 atm is 0.8?(a) 0.2(b) 0.4(c) 0.6(d) 0.8This question was posed to me in an interview for internship.My question is from Condensation in division Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
If the fraction of water vapor at 27^oC and 5 atm is 0.5, then what is the fraction of water vapor at 27^oC and 1 atm?(a) 0.1(b) 0.2(c) 0.5(d) 0.8This question was posed to me during an interview.I would like to ask this question from Condensation topic in portion Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
Condensation starts at which point?(a) Dew point(b) Bubble point(c) Triple point(d) None of the mentionedThis question was posed to me during a job interview.My doubt is from Condensation topic in division Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering
Which of the following is not a way of condensation of vapor?(a) Cooling at constant volume(b) Cooling at constant pressure(c) Compress it isothermally(d) Compress itI got this question during an interview.Origin of the question is Condensation topic in section Real Gases: Equations of State, Single Component Two Phase Systems, Saturation & Condensation of Basic Chemical Engineering

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment