1.

Solve : MEMORY_MANAGEMENT BSOD, seemingly hardware related?

Answer»

Hey, about a week and a half ago I upgraded my system to a Ryzen 5 5600X with a B550 motherboard, and it seemed to be working fine. However, at some point, I started getting MEMORY_MANAGEMENT BSODs, and they became more frequent, to the point of me booting my computer and getting a BSOD as soon as I open a single program. I also got some other errors, like IRQL_NOT_LESS_OR_EQUAL and CRITICAL_STRUCTURE_CORRUPTION. Here's what I've tried:

Ran Memtest86 and Windows Memory Diagnostic, both returned 0 problems with the memory.
Disabled XMP and Memory Fast Boot
Reinstalled Windows
Ran in Safe Mode
Updated the motherboard BIOS (used both the one that first added support for Zen 3 and the newest one that came out after)
Swapped my SSD
Cleared my CMOS
Ran Ubuntu (got kernel panic while trying to load the OS, due to an error along the lines of "Memory corruption detected in low memory", and "not syncing: Fatal exception in interrupt"
Disabled system virtual memory

I even tried reinstalling Windows a second time, at which point it crashed DURING the installation off the USB stick. I didn't even know it was possible to BSOD the Windows USB. After that, I feel like software issues and the windows installation are ruled out as causes. The BIOS update probably RULES out that BIOS being the problem. The RAM diagnostics both also rule out the RAM (although I'm still a bit suspicious because I'm still using the sticks I bought when Skylake came out). Sometimes, usually after a fresh boot, I'm able to get into Windows for long enough to run a few Prime95 tests and Linpack Xtreme. My computer powered through everything and it seemed as though nothing was wrong. I restarted my computer and crashed after opening a program and being on my desktop for 3 seconds. It's random, it can happen quickly, sometimes it just doesn't even seem as though ANYTHING is wrong. I suspect it may be my motherboard, but I don't have another CPU to test it with. If you could let me know what you think, or what my next course of action should be, I'd appreciate it. I'm also open to trying any suggestions. Thanks!


Speccy: http://speccy.piriform.com/results/oVQWq2u1rw0BbJaDGLadlse


Sysnative report: https://drive.google.com/file/d/1fXSu8K2pKwWKEOGLSiPBLP_yMEK4uJ89/view?usp=sharingDid you re-use the old RAM ? ?...Speccy does not even report a model #
Down further in the Speccy report the memory is reported as

G.Skill F4-3200C16-4GVKB

The memory doesn't show up in any of the QLV tables for the motherboard I din't dig deep enuff... Quote from: patio on February 02, 2021, 08:59:23 AM

Did you re-use the old RAM ? ?...Speccy does not even report a model #
Yeah, it's my same ram. G.Skill Ripjaws V rated for CL16 3200MHz with a Hynix die, 4x4Gb sticks. I'm running it at stock DDR4 speed, 2133MHz CL15
It seems my computer only starts CRASHING after a reboot, but if I leave my computer totally off for like half an HOUR, come back, and turn it on, it seems to be stable.


Discussion

No Comment Found