1.

Solve : Iomegazip100 drivers for Winxp?

Answer»

EEEKKK!
DAUGHTER unpluged my printer and plugged in my old IOMEGAZIP 100 drive into the Parallel port and d/l the software off the net for it.

I cannot get it to run.

Any Ideas?

Thanks,
FLBob Quote

EEEKKK!
Daughter unpluged my printer and plugged in my old IomegaZip 100 drive into the Parallel port and d/l the software off the net for it.

I cannot get it to run.

Any Ideas?

Thanks,
FLBob

Greetings FLBob,

First unplug the Zip Drive and leave it out until later.
Go to Control Panel>Add/Remove programs and and uninstall Iomega program.
Then:
Go to Control Panel>System>Hardware Tab>Device Manager>Click+ 'Open Disk DRIVES' Highlight Iomega 100 Zip>Action>Uninstall>ReBoot.
note: if you don't find the Zip 100 in device manager don't worry.

Had one of these, and as I remember the Installation was as follows:
Leave Zip Drive unplugged from system for now.

USING CD or download file and install the software which includes the drivers you got from Iomega and Shutdown Computer.

Now plug in the Zip drive to which ever port you are using and Start Computer. Windows will find the drivers for the hardware.

If the above does not work for you make sure you have the right drivers. You need drivers for Iomega Zip 100 Parallel Port. Also make sure you get them for the right OS ie. WIN XP or Win98SE etc. The drivers are here and also Install manual.
https://www.iomega.com/na/landing.jsp
Best of luck,
ultra_classic
Thanks so much for the feedback!

I d/l the file and it loaded and recognisedd the drive when i wnet to windows explorer.

Thanks again,

FLBob Quote
Thanks so much for the feedback!

I d/l the file and it loaded and recognisedd the drive when i wnet to windows explorer.

Thanks again,

FLBob

Greetings FLBob,
Thanks for posting back with the OUTCOME. Glad to hear all is well.
Best regards,
ultra_classic


Discussion

No Comment Found

Related InterviewSolutions