Driving vehicles on wet surfaced roads, is dangerous because it may ___________(a) overturn(b) slip(c) skid(d) slip and skidThis question was posed to me during an online interview.My doubt is from Detailed Specifications of Road Work in portion Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing

Driving vehicles on wet surfaced roads, is dangerous because it may __

1.	Driving vehicles on wet surfaced roads, is dangerous because it may ___________(a) overturn(b) slip(c) skid(d) slip and skidThis question was posed to me during an online interview.My doubt is from Detailed Specifications of Road Work in portion Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
Answer» The correct answer is (B) slip The best explanation: An automobile skid is an automobile handling condition where one or more TIRES are slipping relative to the road, and the OVERALL handling of the VEHICLE has been affected. In (automotive) vehicle dynamics, slip is the relative motion between a tire and the road surface it is moving on. This slip can be generated either by the tire’s rotational speed being greater or less than the free-rolling speed, or by the tire’s plane of ROTATION being at an angle to its direction of motion.

Discussion

No Comment Found

Related InterviewSolutions

The absolute minimum sight distance required for stopping a vehicle moving with a speed of 80 km ph, is ____________(a) 100 cm(b) 120 cm(c) 40 cm(d) 60 cmI have been asked this question in an interview for internship.This interesting question is from Detailed Specifications of Road Work topic in section Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
In ideal pavement is constructed with _________(a) bricks(b) hard soil(c) portland cement concrete(d) tarI have been asked this question in semester exam.Asked question is from Detailed Specifications of Road Work topic in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
What will be the ruling gradient in hills on “Other district roads”?(a) 1 in 20(b) 1 in 5(c) 1 in 10(d) 1 in 3The question was posed to me during an interview for a job.This intriguing question originated from General Specifications of Modern Road in section Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For controlling the amount of water in cement regular moisture test should be carried out to maintain the required consistency.(a) True(b) FalseI got this question in an online quiz.I would like to ask this question from Detailed Specifications topic in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For first class building roof shall be of R.C.C. slab.(a) True(b) FalseThis question was posed to me during a job interview.This intriguing question comes from General Specifications topic in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
Water, if any accumulates in the trench, should be bailed or pumped out without any extra payment.(a) True(b) FalseThis question was posed to me during an internship interview.My query is from Detailed Specifications in portion Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For 2nd class building superstructure shall be of 1st class brickwork in lime mortar.(a) True(b) FalseThis question was posed to me in a national level competition.Question is from General Specifications in chapter Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
General specification gives the nature and the class of the work and the materials in general terms.(a) True(b) FalseI have been asked this question in examination.The doubt is from General Specifications topic in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
For fourth class building roofing shall be of __________ over bamboo and wooden supports.(a) Mud roof(b) Tile roof(c) Wooden roof(d) Bamboo roofThis question was posed to me during an interview.I need to ask this question from General Specifications in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing
Which type of door does the figure show?(a) Hinged doors(b) Folding door(c) Rotating door(d) Automatic doorThis question was addressed to me in examination.I would like to ask this question from Estimate of Materials for Different House Parts topic in division Specifications, Estimation of Quantities of Materials and Transport of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment