Saved Bookmarks
| 1. |
Describe the principle and function of motor with its components |
|
Answer» Electric Motor\xa0operates on direct current obtained from a battery.\xa0Principle: An electric motor works on the principle that a current carrying conductor placed in a magnetic field experiences a force.\xa0\xa0\xa0Fig.\xa0An electric d.c.\xa0motorConstruction:\xa0An electric motor consists of the following main parts:1. Field magnet: It is a strong horse shoe type magnet with concave poles.2. Armature: It is a rectangular coil ABCD having a large number of turns of thin insulated copper wire wound over a soft iron core.\xa0The armature is placed between the poles of the field magnet and it can be rotated about an axis perpendicular to the magnetic field lines.\xa03. Split ring commutator: It consists of a cylindrical metal ring split into two halves S1and S2. The two ends A and D of the armature coil are connected to the split rings S1\xa0and S2\xa0respectively. As the coil rotates, the split rings also rotate about the same axis of rotation. The function of the split ring commutator is to reverse the direction of current in the coil after every half rotation.4. Brushes: Two graphite or flexible metal rods maintain a sliding contact with split rings S1\xa0and S2, alternately.5. Battery: A battery of few cells is connected to the brushes. The current from the battery flows to the armature coil through the brushes and the split rings.Working: Initially, suppose the plane of the coil is horizontal. The split ring S1\xa0touches the brush B1\xa0and split ring S2\xa0touches the brush B2. The current in coil flows in the direction ABCD from the source battery, as shown in Fig.(a).Clearly, the currents in arms AB and CD are in opposite directions. The force acting on arm AB pushes it downwards while the force acting on the arm CD pushes it upwards. Thus the armature coil alongwith the axle rotates anticlockwise. After half a rotation, as shown in Fig.(b), the\xa0split ring\xa0comes in contact with brush B2, and S2\xa0in contact with brush B1. Therefore, the current in the coil gets reversed and flows along the path DCBA. A device that reverses the direction of flow of current through a circuit is called commutator. Thus the arm AB is now pushed up and the arm CD is pushed down. Therefore, the coil and the axle rotate half a turn more in the same direction. The reversing of the current is repeated at each half rotation, giving rise to a continuous rotation of the coil and to the axle.Split ring acts as commutator in electric motors. Kon |
|