Connecting pipe should be _______ mm minimum diameter.(a) 60(b) 300(c) 700(d) 100This question was addressed to me in an online quiz.My question comes from Design of Septic Tanks in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing

Connecting pipe should be _______ mm minimum diameter.(a) 60(b) 300(c)

1.	Connecting pipe should be _______ mm minimum diameter.(a) 60(b) 300(c) 700(d) 100This question was addressed to me in an online quiz.My question comes from Design of Septic Tanks in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
Answer» The correct ANSWER is (a) 60 To explain: It may be of R.C.C, Hume pipe, cast iron pipe, S.W. Inlet and OUTLET may be made through T-junction pipe or baffle wall of precast R.C.C. may be provided at a distance 1/5 of length of the SEPTIC tank so that the inlet sewage may not disturb the working of the tank.

Discussion

No Comment Found

Related InterviewSolutions

Sleepers (ties) are mostly made up of _______________(a) wood(b) prestressed concrete(c) metal(d) steakI had been asked this question in my homework.Enquiry is from Railway Line topic in division Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
Normally earthwork is estimated for 30 m lead for distance and 1.5 m lift for height or depth, and this distance of 30 m and the height of 1.5 m are known as _____________(a) vertical lead and lift(b) normal lead and lift(c) horizontal lead and lift(d) transverse lead and liftI had been asked this question in final exam.My question comes from Estimate of Earthwork by Three Methods in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
____________ is the predominant gauge used by Indian railways.(a) Broad gauge(b) Narrow gauge(c) Metre gauge(d) Standard gaugeThis question was addressed to me by my college professor while I was bunking the class.I need to ask this question from Railway Line in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
Name the open drains provided for conveying water from kitchens, bathroom and rain water to main sewers.(a) drains(b) Sewers(c) Soak pit(d) Surface drainsThis question was posed to me during an online exam.My question comes from Water Supply Works in portion Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
The lowest or weakest level of decontamination is sanitation.(a) True(b) FalseThe question was posed to me in class test.This interesting question is from Sanitary Works topic in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
What is the longitudinal slope called?(a) Kerb(b) Horizon(c) Grade(d) LiftThis question was posed to me in an internship interview.This is a very interesting question from Estimate of Earthwork by Three Methods topic in division Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
Figure shown below represents a symbol ‘A’, it signifies?(a) Septic tank(b) Soak pit(c) Gutter(d) Water storing tankI have been asked this question in my homework.Question is from Design of Septic Tanks topic in portion Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
As a very general guideline it is recommended that the bottom of the pit should be at least _______ above groundwater level.(a) 0.5 m(b) 2 m(c) 12 m(d) 20 mI have been asked this question in an interview for internship.Question is taken from Design of Septic Tanks topic in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
The surface of the head of each of the two rails can be maintained by using a ___________(a) rail header(b) rail trimmer(c) rail grinder(d) rail cutterI had been asked this question in homework.I need to ask this question from Railway Line topic in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing
In office building what is the requirement of a water closet for 50 persons?(a) 4(b) 5(c) 2(d) 1I have been asked this question in an online interview.This interesting question is from Water Supply Works in division Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing

Connecting pipe should be _______ mm minimum diameter.(a) 60(b) 300(c) 700(d) 100This question was addressed to me in an online quiz.My question comes from Design of Septic Tanks in section Road Estimating, Sanitary and Water Supply Work of Civil Engineering Drawing

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment