A steam powe cycle with regneration as shown below on the T−s diagra

A steam powe cycle with regneration as shown below on the T−s diagram employs a single open feedwater heater for efficiency improvement. The fluids mix with each other in an open feedwater heater. The turbine is isentropic and the input (bleed) to the feedwater heater from the turbine is at state 2 as shown in the figure. Process 3−4 occurs in the condenser. The pump work is negligible. The input to the boiler is the state 5. The following information is available from the steam tables:3350 State 1 2 3 4 5 6 Enthalpy kJ/kg 3350 2800 2300 175 700 1000 The mass flow rate of steam bled from the turbine as a percentage of the total mass flow rate at the inlet to the turbine at state 1 is20

Answer» A steam powe cycle with regneration as shown below on the

T - s

diagram employs a single open feedwater heater for efficiency improvement. The fluids mix with each other in an open feedwater heater. The turbine is isentropic and the input (bleed) to the feedwater heater from the turbine is at state

2

as shown in the figure. Process

3 - 4

occurs in the condenser. The pump work is negligible. The input to the boiler is the state

5

. The following information is available from the steam tables:

3350

State	$1$	$2$	$3$	$4$	$5$	$6$
Enthalpy $k J / k g$	$3350$	$2800$	$2300$	$175$	$700$	$1000$

The mass flow rate of steam bled from the turbine as a percentage of the total mass flow rate at the inlet to the turbine at state

1

Discussion

No Comment Found

Related InterviewSolutions

Reply to Comment