a) Enlist the different material and tools required for the changing o

1.	a) Enlist the different material and tools required for the changing of fuel filter. b) Also give different steps to be followed while changing fuel filter of a car.
Answer» (a) Material and tools requirement for the changing of fuel filter 1. Safety glasses or some other eye protection 2. Replacement filter 3. Screwdriver to undo clamps 4. Container to catch fuel that leaks from hoses 5. Rags to clean up any spilled fuel, dispose of them if used 6. Specialty tools, some vehicles require the use of special tools to disconnect fuel fittings, including the fittings connecting the fuel filter (b) Steps to be followed while changing fuel filter of a car: 1. Take the suitable fuel filter 2. Locate the old filter - it may be in the engine compartment or under the car near the fuel tank 3. If the vehicle manufacturer has recommended any procedure, follow it to remove fuel pressure 4. Unscrew each hose clamp bolt until it nearly comes apart from the nut 5. Push the clamp up the hose 6. Remove the old filter and replace with new filter 7. Run the engine and check for leaks.

a) Enlist the different material and tools required for the changing of fuel filter. b) Also give different steps to be followed while changing fuel filter of a car.

Answer»

(a) Material and tools requirement for the changing of fuel filter

1. Safety glasses or some other eye protection

2. Replacement filter

3. Screwdriver to undo clamps

4. Container to catch fuel that leaks from hoses

5. Rags to clean up any spilled fuel, dispose of them if used

6. Specialty tools, some vehicles require the use of special tools to disconnect fuel fittings, including the fittings connecting the fuel filter

(b) Steps to be followed while changing fuel filter of a car:

1. Take the suitable fuel filter

2. Locate the old filter - it may be in the engine compartment or under the car near the fuel tank

3. If the vehicle manufacturer has recommended any procedure, follow it to remove fuel pressure

4. Unscrew each hose clamp bolt until it nearly comes apart from the nut

5. Push the clamp up the hose

6. Remove the old filter and replace with new filter

7. Run the engine and check for leaks.